diff options
Diffstat (limited to 'x11-servers/XFree86-4-Server-snap/scripts/configure')
| -rw-r--r-- | x11-servers/XFree86-4-Server-snap/scripts/configure | 383 |
1 files changed, 0 insertions, 383 deletions
diff --git a/x11-servers/XFree86-4-Server-snap/scripts/configure b/x11-servers/XFree86-4-Server-snap/scripts/configure deleted file mode 100644 index f103b10daf9e..000000000000 --- a/x11-servers/XFree86-4-Server-snap/scripts/configure +++ /dev/null @@ -1,383 +0,0 @@ -#!/bin/sh - -yesno () { - answ=X; - while [ $answ = X ]; do - echo -n "$1 [YES] " - read answ - if [ X$answ = X ]; then answ="YES"; fi - case $answ in - y|yes|Y|YES) answ=YES;; - n|no|N|NO) answ=NO;; - *) echo invalid answer - answ=X - ;; - esac - done -} -noyes() { - answ=X; - while [ $answ = X ]; do - echo -n "$1 [NO] " - read answ - if [ X$answ = X ]; then answ="NO"; fi - case $answ in - y|yes|Y|YES) answ=YES;; - n|no|N|NO) answ=NO;; - *) echo invalid answer - answ=X - ;; - esac - done -} -F=$WRKDIR/.config -configure () { -rm -f $F - -# Tk detection -tkversion= -for v in 42 80 81 82; do - if [ -f /usr/local/lib/libtk$v.a ]; then - tkversion=$v - case $tkversion in - 42) - tclversion=76 - tclLversion=7.6 - tkLversion=4.2 - ;; - 80) - tclversion=80 - tclLversion=8.0 - tkLversion=8.0 - ;; - 81) - tclversion=81 - tclLversion=8.1 - tkLversion=8.1 - ;; - 82) - tclversion=82 - tclLversion=8.2 - tkLversion=8.2 - ;; - esac - fi -done -if [ X$tkversion != X ]; then - echo "Using tk-$tkLversion" - echo "#define HasTk YES" >>$F - echo "#define TkLibDir /usr/local/lib" >>$F - echo "#define TkIncDir /usr/local/include/tk$tkLversion" >>$F - echo "#define TkLibName tk$tkversion" >>$F - echo "#define HasTcl YES" >>$F - echo "#define TclLibDir /usr/local/lib" >>$F - echo "#define TclIncDir /usr/local/include/tcl$tclLversion" >>$F - echo "#define TclLibName tcl$tclversion" >>$F -else -cat <<EOF -*** I don't see the static library for tk version $tkversion in /usr/local/lib. -*** XF86Setup will not be installed. If you want to build this program -*** install tk 4.2 or 8.x first. - -EOF -fi - -cat <<END - Which servers do you wish to build, you can save a lot of disk space - by only compiling the server you will be using. It will also save you - considerable compile time. -END -if [ X$tkversion != X ]; then - echo "*** If you want to use XF86Setup to set the INITIAL configuration," - echo "*** then you must build the VGA server" -fi -# force the compilation of the EGC server for pc98. -if [ X"${MACHINE}" = X"pc98" ]; then - echo "#define BuildPC98Servers YES" >>$F - echo "#undef XF98EGCServer" >>$F - echo "#define XF98EGCServer YES" >>$F - servers="GA968 GANBWAP NEC480 NKVNEC WABS WABEP WSNA TGUI MGA SVGA NECS3 PWSKB PWLB" - selected=EGC - for i in $servers; do - yesno "Do you want to build the $i server?" - if [ $answ = YES ]; then selected="$selected $i"; fi - echo "#undef XF98${i}Server" >>$F - echo "#define XF98${i}Server $answ" >>$F - done - echo "#undef XF86SVGAServer" >>$F - echo "#define XF86SVGAServer NO" >>$F - servers="VGA16 VGA16Dual Mono MonoDual S3 S3V I8514 Mach8 Mach32 Mach64 P9000 AGX W32 I128 GLINT" - for i in $servers; do - echo "#undef XF86${i}Server" >>$F - echo "#define XF86${i}Server NO" >>$F - done -elif [ X"${MACHINE}" = X"alpha" ]; then -# force the compilation of the SVGA server. - echo "#undef XF86SVGAServer" >>$F - echo "#define XF86SVGAServer YES" >>$F - servers="Mono S3 S3V Mach64 P9000 I128 GLINT TGA" - selected=SVGA - for i in $servers; do - yesno "Do you want to build the $i server?" - if [ $answ = YES ]; then selected="$selected $i"; fi - echo "#undef XF86${i}Server" >>$F - echo "#define XF86${i}Server $answ" >>$F - done -else -# force the compilation of the SVGA server. - echo "#undef XF86SVGAServer" >>$F - echo "#define XF86SVGAServer YES" >>$F - servers="VGA16 VGA16Dual Mono MonoDual S3 S3V I8514 Mach8 Mach32 Mach64 P9000 AGX W32 I128 GLINT" - selected=SVGA - for i in $servers; do - yesno "Do you want to build the $i server?" - if [ $answ = YES ]; then selected="$selected $i"; fi - echo "#undef XF86${i}Server" >>$F - echo "#define XF86${i}Server $answ" >>$F - done -fi - -echo -ok=0 -while [ $ok != 1 ]; do - echo -n "default server to install. [none] " - read answ - if [ X$answ = X ]; then answ=none; ok=1; fi - if [ $answ != none ]; then - for i in $selected; do if [ $i = $answ ]; then - ok=1 - if [ X"${MACHINE}" = X"pc98" ]; then - echo "#define ServerToInstall XF98_$answ" >>$F - else - echo "#define ServerToInstall XF86_$answ" >>$F - fi - fi - done - fi - if [ $ok = 0 ]; then echo you must choose a server among $selected; fi -done -echo -yesno "Do you want to build Xvfb?" -echo "#define XVirtualFramebufferServer $answ" >>$F - -if [ X"${MACHINE}" != X"pc98" ]; then -if [ X"${MACHINE}" = X"alpha" ]; then -cat >> $F <<END -#define XF86SvgaDrivers nv mga s3v generic - -#define XF86MonoDrivers hgc1280 sigma apollo hercules -END -else -cat >> $F <<END -#define XF86SvgaDrivers nv et4000 et3000 pvga1 gvga ati sis tvga8900 \ - cirrus ncr77c22 compaq mga oak al2101 ali \ - cl64xx video7 ark mx realtek apm s3_savage s3v \ - s3_svga neo chips cyrix rendition p9x00 \ - spc8110 i740 tdfx generic - -#define XF86Vga16Drivers et4000 et3000 ncr77c22 ati sis tvga8900 oak \ - cl64xx generic - -#define XF86Vga2Drivers et4000 et3000 pvga1 gvga ati sis tvga8900 \ - cirrus ncr77c22 oak cl64xx generic - -#define XF86MonoDrivers hgc1280 sigma apollo hercules - -#define XF86W32Drivers et4000w32 - -END -fi -fi - - -cat <<END - - - Do you want to install the default system config files, this will overwrite - and files that you may be currently using. This would only be required - on a first time build. -END -yesno "Install xdm config?" -if [ $answ = YES ]; then - echo "#define InstallXdmConfig $answ" >> $F -fi -yesno "Install xinit config?" -if [ $answ = YES ]; then - echo "#define InstallXinitConfig $answ" >> $F -fi -yesno "Install xfs config?" -if [ $answ = YES ]; then - echo "#define InstallFSConfig $answ" >> $F -fi - -yesno "Do you want to include support for the FontServer?" -echo "#undef BuildFontServer" >>$F -echo "#define BuildFontServer $answ" >>$F -echo "#undef InstallFSConfig" >>$F -echo "#define InstallFSConfig $answ" >>$F - -cat <<'END' - Do you want to Build Fonts (Usually you only want to build and install - fonts once, if this is a first time install you will want to build the - fonts) -END -yesno "Build fonts?" -if [ $answ = NO ]; then - echo "#define BuildFonts NO" >> $F -fi -yesno "Build the servers with Extended input devices?" -if [ $answ = NO ]; then - echo "#undef BuildXInputExt" >> $F - echo "#define BuildXInputExt NO" >> $F -else - if [ X${MACHINE} != X"alpha" ]; then - echo "#define JoystickSupport YES" >> $F - fi -fi - -yesno "Build PEX?" -if [ $answ = NO ]; then - echo "#define BuildPexExt NO" >> $F -fi -yesno "Build XIE?" -if [ $answ = NO ]; then - echo "#define BuildXIE NO" >> $F -fi -echo - -yesno "Build static libraries in addition to shared libraries?" -if [ $answ = YES ]; then - echo "#define ForceNormalLib YES" >> $F -fi -# ELF detection -if [ `sysctl -n kern.osreldate` -ge 300004 -a X`objformat` = Xelf ]; then - ELF=yes - noyes "Do you want to build and install a.out compatibility libraries?" - if [ $answ = YES ]; then - echo "#define BuildAoutLibraries YES" >> $F - fi -else - ELF=no -fi - -if [ ${OSVERSION} -ge 300000 ]; then -cat <<'END' - - FreeBSD-3.x has support for Secure RPC. - - While this scheme is not used for general purpose encryption, - some countries restrict the use of strong cryptography. - -END -yesno "Build with Secure RPC?" -if [ $answ = YES ]; then - echo "#define HasSecureRPC YES" >> $F -fi -fi -cat <<'END' - - MIT supplies an authentication mechanism that relies upon DES, this is - called XDM-AUTHORIZATION-1. - - Source code for this authentication mechanism may not be exported from - the United States, however, there are compatible replacements for this - mechanism available elsewhere. Also, while this scheme is not used for - general purpose encryption, some countries restrict the use of strong - cryptography. - - If you have aquired a copy of "Wraphelp.c" and it currently resides in - the same location as the XFree86 source or in the ports "files" - subdirectory, it will be copied into the right place in the X11 source - distribution and support for this feature will be enabled if you answer - YES to the following question. - - If you do not have a copy of this file, even if you answer YES to this - question, support will not be enabled. If you wish to change this later, - the option controling this is contained the file xc/config/cf/xf86site.def. - -END -yesno "Do you want to enable XDM-AUTHORIZATION-1 support?" -cpwh=NO -if [ $answ = YES ]; then - WH=$WRKDIR/xc/lib/Xdmcp/Wraphelp.c - - if [ -f $WH ] ; then - echo "==> $WH found in source distribution." - elif [ -f $DISTDIR/xc/Wraphelp.c ] ; then - echo "==> Wraphelp.c found in DISTDIR directory, copying to source tree." - cpwh=$DISTDIR/xc/Wraphelp.c - elif [ -f $FILESDIR/Wraphelp.c ] ; then - echo "==> Wraphelp.c found in files directory, copying to source tree." - cpwh=$FILESDIR/Wraphelp.c - else - echo "==> Wraphelp.c not found, DES support NOT enabled." - cpwh=NO - fi -fi -if [ $cpwh != NO ]; then - echo "#define HasXdmAuth $answ" >> $F -fi - -cat <<'END' - - XDM can be built so that it will get a KerberosIV TGT for your users - when they log in. This requires that you have Kerberos on your system - when you do this build. - - Source code for this authentication mechanism may not be exported from - the United States, however, there are compatible replacements for this - mechanism available elsewhere. Also, while this scheme is not used for - general purpose encryption, some countries restrict the use of strong - cryptography. - - Even if you answer YES to the following question, KerberosIV support - will not be enabled if the kerberos libraries are unavailable. - -END -yesno "Do you want to enable KerberosIV support?" -cpkb=NO -if [ $answ = YES ]; then - if [ $ELF = yes ]; then - LIBKRB=/usr/lib/libkrb.a - elif [ -d /usr/lib/aout ]; then - LIBKRB=/usr/lib/aout/libkrb.a - else - LIBKRB=/usr/lib/libkrb.a - fi - K4PATCH=$FILESDIR/kerberos4.diffs - K4XDM="$FILESDIR/krb4auth.c $FILESDIR/krb4auth.h" - XDMDIR=$WRKDIR/xc/programs/xdm/ - - if [ -f $LIBKRB ] ; then - echo "==> KerberosIV found in system libraries." - cpkb=YES - else - echo "==> Kerberos libraries not found on system." - echo "==> KerberosIV support NOT enabled." - cpkb=NO - fi -fi -if [ $cpkb != NO ]; then - echo "#define HasKrb4 $answ" >> $F -fi - -echo -echo "End of configuration questions. No more user input required" -echo -} - -configure - -if [ X$cpwh != XNO ]; then - cp $cpwh $WH -fi - -if [ X$cpkb != XNO ]; then - cp $K4XDM $XDMDIR - echo "===> Applying KerberosIV patches" - patch -s -d $WRKDIR/xc -E -p0 < $K4PATCH -fi - -cat $F >> $WRKDIR/xc/config/cf/xf86site.def - -exit 0 |