diff options
Diffstat (limited to 'sysutils/nut22/Makefile')
-rw-r--r-- | sysutils/nut22/Makefile | 174 |
1 files changed, 0 insertions, 174 deletions
diff --git a/sysutils/nut22/Makefile b/sysutils/nut22/Makefile deleted file mode 100644 index 49bc3ccbdfbe..000000000000 --- a/sysutils/nut22/Makefile +++ /dev/null @@ -1,174 +0,0 @@ -# Created by: Boris Popov <bp@FreeBSD.org> -# $FreeBSD$ - -PORTNAME= nut -PORTVERSION= 2.2.2 -PORTREVISION= 6 -CATEGORIES= sysutils -MASTER_SITES= http://www.networkupstools.org/source/${PORTVERSION:R}/ -DISTFILES= ${DISTNAME}${EXTRACT_SUFX} ${DISTNAME}${EXTRACT_SUFX}.sig -EXTRACT_ONLY= ${DISTNAME}${EXTRACT_SUFX} -PKGNAMESUFFIX= 22 - -MAINTAINER= ports@FreeBSD.org -COMMENT= Network UPS Tools - -USE_AUTOTOOLS= autoconf -GNU_CONFIGURE= yes -USE_LDCONFIG= yes -USES= gmake pkgconfig - -NUT_USER?= uucp -NUT_GROUP?= uucp -STATEDIR?= /var/db/nut - -OPTIONS_DEFINE= SERIAL USB SNMP NEON HAL IPV6 DEVEL CGI DOCS -OPTIONS_DEFAULT= SERIAL USB SNMP NEON IPV6 -SERIAL_DESC= SERIAL support -USB_DESC= USB support -NEON_DESC= NEON XML/HTTP support -DEVEL_DESC= Install header files -CGI_DESC= Web CGI interface - -USE_RC_SUBR= nut nut_upsmon nut_upslog -SUB_LIST+= STATEDIR=${STATEDIR} -PLIST_SUB+= STATEDIR=${STATEDIR} - -MAN5= ups.conf.5 upsd.conf.5 upsd.users.5 upsmon.conf.5 \ - upssched.conf.5 - -MAN8= nutupsdrv.8 upsc.8 upscmd.8 upsd.8 upsdrvctl.8 \ - upslog.8 upsmon.8 upsrw.8 upssched.8 - -PORTDOCS= * - -NO_STAGE= yes -.include <bsd.port.pre.mk> - -CONFIGURE_ARGS= --sysconfdir=${PREFIX}/etc/nut \ - --program-transform-name="" \ - --localstatedir=${STATEDIR} \ - --datadir=${PREFIX}/etc/nut \ - --with-drvpath=${PREFIX}/libexec/nut \ - --with-statepath=${STATEDIR} \ - --with-altpidpath=${STATEDIR} \ - --with-pidpath=${STATEDIR} \ - --with-pkgconfig-dir=${PREFIX}/libdata/pkgconfig \ - --with-linux-hiddev=no \ - --with-user=${NUT_USER} \ - --with-group=${NUT_GROUP} - -.if ${PORT_OPTIONS:MCGI} -LIB_DEPENDS+= libgd.so:${PORTSDIR}/graphics/gd -MAN5+= hosts.conf.5 upsset.conf.5 upsstats.html.5 -MAN8+= upsset.cgi.8 upsstats.cgi.8 upsimage.cgi.8 -CGIDIR?= ${PREFIX}/www/cgi-bin/${PORTNAME} -CGIDIR_REL?= ${CGIDIR:S,^${PREFIX}/,,} -CONFIGURE_ARGS+= --with-cgi --with-cgipath=${CGIDIR} \ - --with-htmlpath=${WWWDIR} \ - --with-gd-includes=-I${PREFIX}/include \ - --with-gd-libs="-L${PREFIX}/lib -lgd" -PLIST_SUB+= NUT_CGI="" -PLIST_SUB+= CGIDIR="${CGIDIR_REL}" -PLIST_SUB+= CGIETCDIR="etc/nut/" -.else -CONFIGURE_ARGS+= --without-cgi -PLIST_SUB+= NUT_CGI="@comment " -.endif - -.if ${PORT_OPTIONS:MSERIAL} -CONFIGURE_ARGS+= --with-serial -MAN8+= al175.8 apcsmart.8 bcmxcp.8 belkin.8 belkinunv.8 \ - bestuferrups.8 bestups.8 bestfcom.8 cpsups.8 cyberpower.8 \ - dummy-ups.8 etapro.8 everups.8 gamatronic.8 genericups.8 \ - isbmex.8 liebert.8 masterguard.8 megatec.8 metasys.8 \ - mge-shut.8 mge-utalk.8 nitram.8 oneac.8 optiups.8 \ - powercom.8 powerpanel.8 rhino.8 safenet.8 solis.8 tripplite.8 \ - tripplitesu.8 upscode2.8 victronups.8 -PLIST_SUB+= NUT_SERIAL="" -.else -CONFIGURE_ARGS+= --without-serial -PLIST_SUB+= NUT_SERIAL="@comment " -.endif - -.if ${PORT_OPTIONS:MUSB} -EXTRA_PATCHES= ${FILESDIR}/extra-patch-m4_nut_check_libusb.m4 -CONFIGURE_ARGS+= --with-usb=auto -MAN8+= bcmxcp_usb.8 megatec_usb.8 tripplite_usb.8 usbhid-ups.8 -PLIST_SUB+= NUT_USB="" -.else -CONFIGURE_ARGS+= --without-usb -PLIST_SUB+= NUT_USB="@comment " -.endif - -.if ${PORT_OPTIONS:MSNMP} -LIB_DEPENDS+= libnetsnmp.so:${PORTSDIR}/net-mgmt/net-snmp -CONFIGURE_ARGS+= --with-snmp -MAN8+= snmp-ups.8 -PLIST_SUB+= NUT_SNMP="" -.else -CONFIGURE_ARGS+= --without-snmp -PLIST_SUB+= NUT_SNMP="@comment " -.endif - -.if ${PORT_OPTIONS:MNEON} -LIB_DEPENDS+= libneon.so:${PORTSDIR}/www/neon29 -CONFIGURE_ARGS+= --with-neonxml -MAN8+= netxml-ups.8 -PLIST_SUB+= NUT_NEON="" -.else -CONFIGURE_ARGS+= --without-neonxml -PLIST_SUB+= NUT_NEON="@comment " -.endif - -.if ${PORT_OPTIONS:MHAL} -. if ! ${PORT_OPTIONS:MUSB} -BROKEN= HAL is only usable with USB support enabled. Run 'make config' again! -. endif -LIB_DEPENDS+= libhal.so:${PORTSDIR}/sysutils/hal -CONFIGURE_ARGS+= --with-hal -#MAN8+= -PLIST_SUB+= NUT_HAL="" -.else -CONFIGURE_ARGS+= --without-hal -PLIST_SUB+= NUT_HAL="@comment " -.endif - -.if ${PORT_OPTIONS:MIPV6} -CONFIGURE_ARGS+= --with-ipv6 -.else -CONFIGURE_ARGS+= --without-ipv6 -.endif - -.if ${PORT_OPTIONS:MDEVEL} -CONFIGURE_ARGS+= --with-dev -MAN3+= upscli_connect.3 upscli_disconnect.3 upscli_fd.3 \ - upscli_get.3 upscli_list_next.3 upscli_list_start.3 \ - upscli_readline.3 upscli_sendline.3 upscli_splitaddr.3 \ - upscli_splitname.3 upscli_ssl.3 upscli_strerror.3 \ - upscli_upserror.3 upsclient.3 - -PLIST_SUB+= NUT_DEVEL="" -.else -CONFIGURE_ARGS+= --without-dev -PLIST_SUB+= NUT_DEVEL="@comment " -.endif - -pre-install: - @${MKDIR} ${PREFIX}/libexec/nut - @${MKDIR} ${STATEDIR} - @${CHOWN} ${NUT_USER}:${NUT_GROUP} ${STATEDIR} - @${CHMOD} 0750 ${STATEDIR} - -.if ${PORT_OPTIONS:MDOCS} -post-install: - @${MKDIR} ${DOCSDIR}/cables - ${INSTALL_DATA} ${WRKSRC}/docs/cables/*.txt ${DOCSDIR}/cables - ${INSTALL_DATA} ${WRKSRC}/docs/*.txt ${DOCSDIR} - ${INSTALL_DATA} ${WRKSRC}/docs/FAQ ${DOCSDIR} -.for file in AUTHORS COPYING ChangeLog INSTALL MAINTAINERS NEWS README UPGRADING - ${INSTALL_DATA} ${WRKSRC}/${file} ${DOCSDIR} -.endfor -.endif - -.include <bsd.port.post.mk> |