diff options
Diffstat (limited to 'net')
| -rw-r--r-- | net/binkd/Makefile | 23 | ||||
| -rw-r--r-- | net/binkd/files/binkd.conf | 546 | ||||
| -rw-r--r-- | net/binkd/files/binkd.in | 2 | ||||
| -rw-r--r-- | net/binkd/pkg-plist | 10 | ||||
| -rw-r--r-- | net/mtr/Makefile | 3 | ||||
| -rw-r--r-- | net/mtr/distinfo | 6 | ||||
| -rw-r--r-- | net/py-pyzmq/Makefile | 18 | ||||
| -rw-r--r-- | net/py-pyzmq/distinfo | 6 | ||||
| -rw-r--r-- | net/redpanda-connect/Makefile | 2 | ||||
| -rw-r--r-- | net/redpanda-connect/distinfo | 10 | ||||
| -rw-r--r-- | net/rubygem-google-cloud-pubsub/Makefile | 8 | ||||
| -rw-r--r-- | net/rubygem-google-cloud-pubsub/distinfo | 6 | ||||
| -rw-r--r-- | net/rubygem-opennebula/Makefile | 3 | ||||
| -rw-r--r-- | net/rubygem-opennebula/distinfo | 6 |
14 files changed, 607 insertions, 42 deletions
diff --git a/net/binkd/Makefile b/net/binkd/Makefile index 96ea3b3bce7e..87761e4d202b 100644 --- a/net/binkd/Makefile +++ b/net/binkd/Makefile @@ -1,5 +1,6 @@ PORTNAME= binkd DISTVERSION= 1.1a-115 +PORTREVISION= 1 CATEGORIES= net MAINTAINER= dz@dolik.dev @@ -16,26 +17,38 @@ GH_TAGNAME= 3bf55d5 USE_RC_SUBR= binkd GNU_CONFIGURE= yes -MAKE_JOBS_UNSAFE=yes +MAKE_JOBS_UNSAFE= yes USERS= fido GROUPS= fido -OPTIONS_DEFINE= ASO DOCS PROXY BWLIM PERL AFF NTLM +OPTIONS_DEFINE= AFF ASO BWLIM DOCS NTLM PERL PROXY -ASO_DESC= Amiga Style Outbound (ASO) support AFF_DESC= Enable soft IP address family force feature +ASO_DESC= Amiga Style Outbound (ASO) support BWLIM_DESC= Bandwidth limiting support NTLM_DESC= Enable NTLM proxy authorization support +AFF_CONFIGURE_WITH= af-force ASO_CONFIGURE_WITH= aso BWLIM_CONFIGURE_WITH= bwlim -AFF_CONFIGURE_WITH= af-force -PROXY_CONFIGURE_WITH= proxy NTLM_CONFIGURE_WITH= ntlm PERL_CONFIGURE_WITH= perl +PROXY_CONFIGURE_WITH= proxy pre-configure: @${CP} ${WRKSRC}/mkfls/unix/* ${WRKSRC}/ +post-install: + ${INSTALL_DATA} ${FILESDIR}/binkd.conf ${STAGEDIR}${PREFIX}/etc/binkd.conf.sample + ${MV} ${STAGEDIR}${PREFIX}/etc/binkd.conf-dist ${STAGEDIR}${PREFIX}/share/doc/binkd + ${MKDIR} ${STAGEDIR}/var/log + ${TOUCH} ${STAGEDIR}/var/log/binkd.log + ${MKDIR} ${STAGEDIR}/var/run/binkd + ${MKDIR} ${STAGEDIR}/var/spool/binkd + ${MKDIR} ${STAGEDIR}/var/spool/binkd/outbound + ${MKDIR} ${STAGEDIR}/var/spool/binkd/inbound-secure + ${MKDIR} ${STAGEDIR}/var/spool/binkd/inbound-unsecure + ${MKDIR} ${STAGEDIR}/var/spool/binkd/inbound-temp + .include <bsd.port.mk> diff --git a/net/binkd/files/binkd.conf b/net/binkd/files/binkd.conf new file mode 100644 index 000000000000..9b047c0fc980 --- /dev/null +++ b/net/binkd/files/binkd.conf @@ -0,0 +1,546 @@ +# Binkd sample configuration file for unix-like enviroment +# Copyright (C) 1996-1997 by Dima Maloff, 2:5047/13 +# Copyright (C) 2013 by Binkd development team +# $Id$ + +# +# Path and name for the logfile, loglevel +# +log /var/log/binkd.log +loglevel 6 + +# +# Your FTN domains: +# domain <name> <main-outbound> <default-zone> [<root-domain>] +# or +# domain <new-name> alias-for <name> +# The first variant specifies a domain as a default domain for 3D/4D addresses. +# +domain fidonet /var/spool/binkd/outbound/fidonet 2 +# +# Aliases to support known wrong 5D configurations +domain fido alias-for fidonet +domain fidorus alias-for fidonet +domain fido7 alias-for fidonet +# +# Aliases to support known DNS domain zones +# (some people mix up the terms "FTN domain" and "DNS internet domain") +domain fidonet.org alias-for fidonet +domain fidonet.net alias-for fidonet + +# +# Your addresses, 5D or 4D or 3D: +# address <addr1> ... +# If the first address is specified as a 3D/4D address, its domain will be +# taken from the domain defined in the first "domain" line. If more addresses +# are specified as 3D/4D ones, their domain will be taken from the first +# address. +# +address -1:-1/-1@fidonet + +# +# Hide or present the specified AKAs if remote AKAs match the address mask +# hide-aka <my-aka> [!]<mask> +# present-aka <add-aka> [!]<mask> +# Mask is compared to the 5d-form of address string, '*' matches any number +# of any symbols (so you have to write '2:5020/*' but not '5020/*') +# Use '!' to invert the mask +# These rules apply in the same order as in config, you can present any address +# +#hide-aka 2:5020/999.* !2:*@fidonet # hide aka from all but fido zone 2 +#present-aka 2:5047/999.1 2:5047/*.0* # present aka to all nodes in 2:5047 + +# +# The name of your system, its location and your name +# +sysname "Ivan's BBS" +location "Magadan, Russia" +sysop "Ivan Ivanov" + +# +# System capabilities +# +nodeinfo 300,TCP,BINKP + +# +# Uncomment it if you want binkd log at your console +# +conlog 4 + +# +# If a log message matches one of these masks, it won't be written to log +# (masks are in shell/glob style, case-insensitive) +# +#nolog "*socket # [0-9]*" +#nolog "*.[bc]sy" + +# +# Uncomment if you want T-Mail(FrontDoor)-style binary log +# (Will work and have sense on PCs only?) +# +#binlog binkd.sts +#fdinhist in.his +#fdouthist out.his + +# +# TCP settings. Leave this unchanged if not sure. +# +# Suffixes for time intervals are w for weeks, d for days, +# h for hours, m for minutes, s or no suffix for seconds. +# You can mix the suffixes, i.e. 1d12h is the same as 36h. +# +#iport binkp +#oport binkp +#oblksize 4096 +#timeout 5m +#connect-timeout 5m +#bindaddr 192.168.0.3 +#listen * + +# +# Zlib compression parameters (if built with zlib support) +# zlevel - compression level (zlib only, bzlib2 uses 100kb always), +# set to 0 to use default value of 6 +# zminsize <size> - files smaller than <size> won't be compressed anyway +# Rules: +# zallow <mask1>[ <mask2>... <maskN>] - allow compression for the masks +# zdeny <mask1>[ <mask2>... <maskN>] - deny compression for the masks +# If remote accepts compressed blocks (OPT GZ), its name will be checked +# against these rules before sending each file. If the name matches a zallow +# rule, the file will be sent with compression. If the name matches a zdeny rule, +# it will be sent as-is. The rule matched first is applied. If a file doesn't +# match any rule, zdeny will be assumed. +# +#zminsize 1024 +# +#zallow *.pkt +#zdeny *.su? *.mo? *.tu? *.we? *.th? *.fr? *.sa? +#zdeny *.zip *.rar *.arj *.ha *.gz *.tgz *.bz2 *.z[0-9][0-9] *.r[0-9][0-9] +#zallow * + +# +# HTTPS or SOCKS settings. +# +# proxy 192.0.2.3:3128 # <- regular http/https proxy (i.e. squid) +# proxy 192.0.2.3:3128/user/password # <- proxy required username/password +# # (as in browser) +# +# proxy 192.168.0.3:3128/user/password/your_host/your_domain +# ^- proxy required NTLM authorization with username/password +# your_host -- Windows host name without domain (i.e. MY_HOST) +# your_domain -- Windows domain name (not FQDN, i.e. DEFAULT_DOMAIN) +# +# socks 192.0.2.3:1080 # <- socks4 proxy +# socks 192.0.2.3:1080/ # <- socks5 proxy without authorization +# socks 192.0.2.3:1080/user/password # <- socks5 proxy with username/password +# # (RFC-1929) + +# +# Delay of calls and outbound rescans in seconds +# +#call-delay 1m +#rescan-delay 1m + +# +# Max. number of inbound/outbound connections +# +#maxservers 2 +#maxclients 2 + +# +# Binkd will try to call a node N times. If failed, it will +# hold the node for S seconds. The feature is off by default. +# +try 10 +hold 10m + +# +# Binkd will remove .try files after successful session. +# The feature is off by default. +# +#remove-try-files + +# +# hold-skipped <S> +# Binkd will hold for S seconds all mail skipped by a node. (Def. -- 1h) +# +#hold-skipped 1h + +# +# Don't send (only receive) files if no password for an inbound session +# +send-if-pwd + +# Tzoff corrects UTC time returned by time() under DOS-derived OS +# Using system TZ variable or tzselect(8) is preferred. +#tzoff 3h + +# +# Use syslog (Only if made with -DHAVE_VSYSLOG and -DHAVE_FACILITYNAMES) +# +#syslog local0 + +# +# Print percents while sending or receiving +# +percents + +# +# List queue after rescans +# +printq + +# +# Perform reverse resolving (for logging only) +# +backresolv + +# +# Log pid: +# +pid-file /var/run/binkd/binkd.pid + +# +# Map paths in flo's: +# ftrans <old-string> <new-string> +# Use as many ftrans's as you want. +# +#ftrans "D:\\fido\\outbound" ~/ftn/outbound +#ftrans "\\" "/" # this replaces all slashes in a path + +# +# Inbound directories for secure and non-secure links +# +inbound /var/spool/binkd/inbound-secure +inbound-nonsecure /var/spool/binkd/inbound-unsecure + +# +# Directory for incomplete receiving files (.hr and .dt), +# default to inbound for the node +# +temp-inbound /var/spool/binkd/inbound-temp + +# +# Binkd will skip all files from a node if +# size_of_the_next_file_for_us_there + minfree < free_space_in_inbound +# The zero value and the value 4294967295 (2**32-1) are equivalent to infinity. +# +minfree 2048 +minfree-nonsecure 2048 + +# +# When trying to receive a new file: remove partial files with this +# name but different size or time from inbound. (If commented out, binkd +# will left old parts as .dt and .hr in the inbound directory). +# +kill-dup-partial-files + +# +# Remove all old partial files from inbound. (OFF if commented out) +# kill-old-partial-files <max-age-in-seconds> +# +kill-old-partial-files 1d + +# +# Remove old .bsy/.csy files (If some are left after a system crash). It would +# be wise to set this to 12h on almost any system. (Note that binkd always +# touches .bsy's/.csy's for active sessions) +# +# kill-old-bsy is OFF by default. +# +kill-old-bsy 12h + +# +# Create a flag file after receiving a file +# +#flag toss!.now *.pkt +#flag toss!.now *.su? *.mo? *.tu? *.we? *.th? *.fr? *.sa? + +# +# Run an external program. +# The "*S" macro in command line substed with S.R.I.F., see !SRIF.TXT +# The "!" before program pathname means immediate program execution +# after receiving the file. +# *** win32 only: +# The "@" before program pathname means execute program in separate console +# The "@@" before program pathname means execute program in hidden console +# *** +# Macros: *F - complete name of received file, +# *A0..*A9 - first 10 AKA of remote system, +# *A*, *A@ - list of all remote AKA separated by spaces +# *P - password protected [0|1], +# *L - listed system [0|1] +# *H - remote hostname or IP, +# *N - short file name (win32 only). +# +#exec "!my-freq-processor /options *S" *.req +#exec "!~/ftn/binkd/srifreq *S" *.req +#exec "my-pkt-unpacker /options *P *A* *F" *.[pP][kK][tT] +#exec "my-tosser /options" /opt/ftn/inbound-secure/*.[STFWMstfwm][ouaherOUAHER][0-9A-Za-z] +#exec "nice -n 19 /usr/bin/hpt toss link" ~/ftn/inbound-secure/*.[STFWMstfwm][ouaherOUAHER][0-9A-Za-z] *.[pP][kK][tT] + +# +# Include a file +# +#include /opt/ftn/binkd.inc + +# +# Overrides root domain for DNS lookups, see 'node' below. +# +#root-domain binkp.net + +# +# Perl hooks file (if built with Perl) +# +#perl-hooks ~/ftn/binkd/nodelist.pl + +# +# Perl DLL file (only matters if compiled with PERLDL=1 for Win32) +# +#perl-dll perl56.dll + +# +# binkd will refuse to start if perl-hooks script has compilation errors. +# Note, that run-time errors still can occur. +# +#perl-strict + +# +# This variables can be used in perl hooks as $cfg{"name"} +# Syntax: perl-var <name> <value> +# +#perl-var nodelist ~/ftn/nodelist/nodelist.[0-9][0-9][0-9] +#perl-var magichost * + +# +# Scan T-Mail boxes (short and long) in CIFS-mounted directory +# +#filebox /mnt/fido/t-mail/boxes + +# +# Scan theBrake! long boxes +# +#brakebox ~/ftn/longbox + +# +# Should binkd delete empty boxes? +# Uncomment the following line if yes +# +#deletebox + +# +# Scan node outbound while connecting and send mail size to remote +# +prescan + +# t-mail or ifcico (qico) password file. +# Format of the password file: +# [password] <FTN address> <inpwd>[,[<pktpwd>][,<outpwd>]] +# where: +# [password] optional "password" token; +# <FTN address> address of a link in the form 1:2/3.4@domain +# or 1:2/3@domain or 1:2/3 or 1:2/3.4; +# <inpwd> password for incoming sessions; +# <pktpwd> packet password, used when "share" token +# is handled; +# <outpwd> password for outgoing sessions. +# Any password is one word without spaces or tabs. If <pktpwd> or <outpwd> +# is omitted, it will be assumed equal to <inpwd>. If a password is defined for +# a node by the "node" token, then the passwords for the node in the password +# file will be ignored. +# +#passwords ~/ftn/binkd/passwords + +# +# Skip files: +# skip [all|listed|unlisted|secure|unsecure] [!]<sizeKb>|- <mask>... +# +# 'all' applies to all sessions (default) +# 'listed' applies to sessions with the nodes defined by 'node' keyword +# 'secure' applies to password-protected sessions +# +# Use '!' before size for destructive skip, default is non-destructive one. +# If <size> > 0, then only files larger than <size> in kilobytes will be skipped; +# zero <size> applies to all files; +# if the <size> is set to '-', then the rule will allow +# any file matching the <mask>. +# +# <mask> is a shell-style mask, case-insensitive (except for symbols in []), +# multiple masks for a rule are permitted. +# +# Policy for rule processing is first-match +# +#skip all 0 *.mp3 *.avi +#skip unsecure 256 *.pkt +#skip unsecure !0 * + +# +# Overwrite the existing file by the new received, +# do not save with the changed extension +# +#overwrite net_*.* + +# +# Inbound filename case: +# inboundcase [save(default)|upper|lower|mixed] +# +# 'save' don't change filename case (default) +# 'upper' uppercase filename (FILE-NAME.EXT) +# 'lower' lowercase filename (file-name.ext) +# 'mixed' make filename pretty (File-Name.Ext) +# +# * tested only with english filenames +# +#inboundcase save + +# +# Rename style if file with the same name already exists in inbound +# rename-style [postix|extension] +# +# 'postfix' append number at the end of filename, after dot (default) +# example: file.ext -> file.ext.1 +# 'extension' change filename extension +# example: file.ext -> file.ex0 +# +# Not applied to *.pkt, arcmail, *.tic, *.req - only filename is changed +# for these file types. +# +#rename-style postfix + +# +# Should binkd send empty files? +# dont-send-empty [no(default)|arcmail|yes] +# +# 'no' inhibit only sending *.?ut (netmail) with size <=60 bytes +# 'arcmail' do not send zero-size arcmail and pkt <= 60 bytes +# 'yes' do not send all zero-size files and pkt <= 60 bytes +# +#dont-send-empty no + +# +# Should binkd delete empty point dirs in BSO? +# Uncomment the following line if yes +# +#deletedirs + +# +# Use Amiga Style Outbound (ASO) +# +#aso + +# +# Limit bandwidth (rate): +# limit-rate [all|listed|unlisted|secure|unsecure] <rate>[kM%]|- <mask>... +# +# <rate> is a max allowed rate in bytes-per-second (k=kbytes, M=Mbytes). +# If '%' is specified, the node -bw rate will be multiplied by this value +# in percents, if '-' is specified, then rate will be unlimited. +# <mask> is a filename mask to apply this rule to. +# +# limit-rate rules are checked in the order they appear in config, first +# matching rule is applied. +# +# IMPORTANT! If a node has no explicitly defined bandwidth limit, the +# defnode's limit will be used. If defnode has no limit, rate will be unlimited. +# +#limit-rate unsecure - *.pkt +#limit-rate unsecure 2k * + +# Define shared aka +# Add a shared-address as aka for any node from this list, so that +# uncompessed netmail for shared aka will be sent in the first session with +# any node listed in shares; packet header will be updated to match this +# node's main aka and pkt password +# share <shared-address> <node1> [<node2> ...] +# example: +#share 2:999/999 2:5020/52 2:5020/238 + +# +# Check the sender's address in incoming pkt's, change the file extension +# to <ext> if the check failed. +# check-pkthdr [all|secure|unsecure|listed|unlisted] <ext> +# +# 'all' applies to all nodes; +# 'listed' will be applied if at least one aka is defined by 'node' keyword; +# 'secure' will be applied if at least one aka is password-protected. +# +# It's ok to specify .<ext> as well as <ext> - the dot before ext is ignored. +# The policy set by check-pkthdr may be overridden by -hc or -nohc flags +# in a 'node' definition (see below). +# Flag order: -nohc (for any aka), -hc (for any aka), check-pkthdr flag +# +#check-pkthdr secure .sec + +# +# Define a link: +# node [[z:]n/]n[.p][@domain] [-nr|-nd] [-md] [-hc|-nohc] [-ip|-sip] [-bw <send_rate>[/<recv_rate>]] [-pipe <cmd>] [-4|-6] [{hosts|-} [{<inpwd>[,[<pktpwd>][,<outpwd>]]|-} [flavour [{obox|-} [{ibox|-}]]]]] +# +# * All non-"-" fields will redefine the values specified for the same node +# earlier in config. +# * The meaning of <inpwd>, <pktpwd> and <outpwd> is the same as in +# the description of the "passwords" token. Any password is one word +# without spaces or tabs. If <pktpwd> or <outpwd> is omitted, it will be +# assumed equal to <inpwd>. +# * Flavour is one of i, c, d, -, h and is the flavour for the outbound +# filebox ("obox"). +# * Binkd sends from obox all non-dir entries NOT matching ".*" wildcard. +# EVERY TIME YOU PUT A FILE INTO OBOX, CHECK IF BINKD IS ABLE TO +# UNLINK IT. Otherwise, the session will never end. +# * Default for ibox is inbound or inbound-nosecure depending on the pwd field. +# * Default for port is oport. +# * '-nr' stands for 'Not Reliable Link', this works only on outbound calls +# with another binkp/1.1 mailer. The option solves the only problem with +# binkd having not enough time to start receiving a file from +# non-zero offset before IP link's down, so don't use it unless you +# have this problem -- really not effective +# * '-nd' means "No Dupe Mode", this works only on outbound calls with +# another binkd 0.9.3 or higher. The option solves the problem with +# duplicating files when connection is lost but link is a bit slower +# than it is with "-nr" option. +# * '-md' means "Must have CRAM-MD5". This works only with the nodes using +# versions of binkd or argus supporting this method. Do not set it if +# your link can use an old version of binkd. +# * '-nomd' - do not use CRAM-MD5 for this node (send plain text password) +# * '-hc' enables check of sender address in pkt header for this node/aka +# (overrides the setting of the 'check-pkthdr' statement) +# * '-nohc' disables check of sender address in pkt header for this node/aka +# (overrides the setting of the 'check-pkthdr' statement) +# * '-ip' means "Remote IP check". In this case the node will be +# rejected if it comes not from one of its IP-addresses. +# Remote AKAs with bad IP-address will be dropped on outgoing calls. +# * '-sip' means "Strict remote IP check". Like "-ip", but node will be +# rejected if no IP-addresses are allowed ("-" or not resolved). +# Remote AKAs with bad IP-address will be dropped on outgoing calls. +# * '-bw' specifies bandwidth (rate) limit for this node. +# If one value is specified, it will be used as both send and recv limit. +# If two values are specified, the first one will be for send and the +# second one for recv. +# The rate values are expected to be in the format '<rate>[kM%]|-' +# (see limit-rate keyword for detailed description). +# * '-noproxy' disables usage of proxy/socks server when calling this node +# (the node is expected to be inside local network). +# * '-pipe' means "run an external command for building a tunnel to the node". +# '*H' macro is substituted by host and '*I' by port number. +# * '-4' only connect via IPv4 +# * '-6' only connect via IPv6 +# * '-64' binkd will first try to connect over IPv6, and in case of failure, +# it will try again over IPv4. Attention! To use the option, you need +# to compile binkd with the "--with-af-force" option. +# * '-46' binkd will first try to connect over IPv4, and in case of failure, +# it will try again over IPv6. Attention! To use the option, you need +# to compile binkd with the "--with-af-force" option. +# * Hosts is a list in form +# host1[:port1][;host2[:port2]] ... +# * Asterisk ('*') in the host list forces Binkd to perform +# 1:2/3.4 --> p4.f3.n2.z1.binkp.net translation for a node's +# Fido-address and IP lookup for the resulting FQDN in DNS. +# Root domain part ("binkp.net") can be changed with root-domain +# keyword. +# +#node 5047/888 - password +#node 5047/999 -md hostname;* password i ~/ftn/personalboxes/to999 ~/ftn/personalboxes/from999 + +# +# Default node flags. Binkd will call an unlisted node if "defnode" is defined. +# +defnode -nd * diff --git a/net/binkd/files/binkd.in b/net/binkd/files/binkd.in index 41e7f06a61ed..1b5395069b47 100644 --- a/net/binkd/files/binkd.in +++ b/net/binkd/files/binkd.in @@ -12,7 +12,7 @@ # DO NOT CHANGE THESE DEFAULT VALUES HERE # binkd_enable=${binkd_enable:-"NO"} -binkd_config=${binkd_config:-"%%PREFIX%%/etc/binkd.cfg"} +binkd_config=${binkd_config:-"%%PREFIX%%/etc/binkd.conf"} binkd_flags=${binkd_flags:-"-D"} binkd_user=${binkd_user:-"fido"} binkd_pidfile=${binkd_pidfile:-"/var/run/binkd/binkd.pid"} diff --git a/net/binkd/pkg-plist b/net/binkd/pkg-plist index 496d34e09448..590267e83537 100644 --- a/net/binkd/pkg-plist +++ b/net/binkd/pkg-plist @@ -1,6 +1,14 @@ -@sample etc/binkd.conf-dist etc/binkd.conf +@sample etc/binkd.conf.sample sbin/binkd sbin/binkd-1.1a-115 share/man/man8/binkd.8.gz %%PORTDOCS%%%%DOCSDIR%%/binkdfaq-en.txt %%PORTDOCS%%%%DOCSDIR%%/binkdfaq-ru.txt +%%PORTDOCS%%%%DOCSDIR%%/binkd.conf-dist +@(fido,fido,644) /var/log/binkd.log +@dir(fido,fido,755) /var/run/binkd +@dir(fido,fido,755) /var/spool/binkd +@dir(fido,fido,755) /var/spool/binkd/outbound +@dir(fido,fido,755) /var/spool/binkd/inbound-secure +@dir(fido,fido,755) /var/spool/binkd/inbound-unsecure +@dir(fido,fido,755) /var/spool/binkd/inbound-temp diff --git a/net/mtr/Makefile b/net/mtr/Makefile index 8c9aecf484d2..d786f96bad56 100644 --- a/net/mtr/Makefile +++ b/net/mtr/Makefile @@ -1,7 +1,6 @@ PORTNAME= mtr -PORTVERSION= 0.95 +PORTVERSION= 0.96 DISTVERSIONPREFIX= v -PORTREVISION= 2 CATEGORIES= net MAINTAINER= sunpoet@FreeBSD.org diff --git a/net/mtr/distinfo b/net/mtr/distinfo index 1140d445491d..dea1181bf98d 100644 --- a/net/mtr/distinfo +++ b/net/mtr/distinfo @@ -1,3 +1,3 @@ -TIMESTAMP = 1643178478 -SHA256 (traviscross-mtr-v0.95_GH0.tar.gz) = 12490fb660ba5fb34df8c06a0f62b4f9cbd11a584fc3f6eceda0a99124e8596f -SIZE (traviscross-mtr-v0.95_GH0.tar.gz) = 144541 +TIMESTAMP = 1752266022 +SHA256 (traviscross-mtr-v0.96_GH0.tar.gz) = 73e6aef3fb6c8b482acb5b5e2b8fa7794045c4f2420276f035ce76c5beae632d +SIZE (traviscross-mtr-v0.96_GH0.tar.gz) = 158043 diff --git a/net/py-pyzmq/Makefile b/net/py-pyzmq/Makefile index bfd0de970bfe..5aa7c40dec9d 100644 --- a/net/py-pyzmq/Makefile +++ b/net/py-pyzmq/Makefile @@ -1,6 +1,6 @@ PORTNAME= pyzmq -DISTVERSION= 25.0.2 -PORTREVISION= 2 +DISTVERSION= 27.0.0 +PORTREVISION= 0 CATEGORIES= net devel MASTER_SITES= PYPI PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX} @@ -9,16 +9,17 @@ MAINTAINER= ports@FreeBSD.org COMMENT= Python bindings for ZeroMQ WWW= https://github.com/zeromq/pyzmq -LICENSE= BSD3CLAUSE LGPL3 -LICENSE_COMB= multi -LICENSE_FILE_BSD3CLAUSE= ${WRKSRC}/LICENSE.BSD -LICENSE_FILE_LGPL3= ${WRKSRC}/LICENSE.LESSER +LICENSE= BSD3CLAUSE +LICENSE_FILE= ${WRKSRC}/LICENSE.md -BUILD_DEPENDS= ${PYTHON_PKGNAMEPREFIX}packaging>0:devel/py-packaging@${PY_FLAVOR} +BUILD_DEPENDS= cmake:devel/cmake-core \ + ninja:devel/ninja \ + ${PYTHON_PKGNAMEPREFIX}scikit-build-core>=0.1.5:devel/py-scikit-build-core@${PY_FLAVOR} \ + ${PYTHON_PKGNAMEPREFIX}packaging>0:devel/py-packaging@${PY_FLAVOR} LIB_DEPENDS= libzmq.so:net/libzmq4 USES= python -USE_PYTHON= distutils autoplist cython pytest # 3 tests fail, see https://github.com/zeromq/pyzmq/issues/1802 +USE_PYTHON= autoplist cython3 pep517 pytest PYDISTUTILS_CONFIGUREARGS= --zmq=${LOCALBASE} @@ -28,6 +29,5 @@ do-test: post-install: ${STRIP_CMD} ${STAGEDIR}${PYTHONPREFIX_SITELIBDIR}/zmq/backend/cython/*.so - ${STRIP_CMD} ${STAGEDIR}${PYTHONPREFIX_SITELIBDIR}/zmq/devices/*.so .include <bsd.port.mk> diff --git a/net/py-pyzmq/distinfo b/net/py-pyzmq/distinfo index 7ef6eb29f9d0..893c4006b3b8 100644 --- a/net/py-pyzmq/distinfo +++ b/net/py-pyzmq/distinfo @@ -1,3 +1,3 @@ -TIMESTAMP = 1680025029 -SHA256 (pyzmq-25.0.2.tar.gz) = 6b8c1bbb70e868dc88801aa532cae6bd4e3b5233784692b786f17ad2962e5149 -SIZE (pyzmq-25.0.2.tar.gz) = 1209578 +TIMESTAMP = 1751765229 +SHA256 (pyzmq-27.0.0.tar.gz) = b1f08eeb9ce1510e6939b6e5dcd46a17765e2333daae78ecf4606808442e52cf +SIZE (pyzmq-27.0.0.tar.gz) = 280478 diff --git a/net/redpanda-connect/Makefile b/net/redpanda-connect/Makefile index a13b89459fa7..875204592873 100644 --- a/net/redpanda-connect/Makefile +++ b/net/redpanda-connect/Makefile @@ -1,6 +1,6 @@ PORTNAME= connect DISTVERSIONPREFIX= v -DISTVERSION= 4.60.0 +DISTVERSION= 4.60.1 CATEGORIES= net PKGNAMEPREFIX= redpanda- diff --git a/net/redpanda-connect/distinfo b/net/redpanda-connect/distinfo index eeddaa49a4da..ac29b8d00ff6 100644 --- a/net/redpanda-connect/distinfo +++ b/net/redpanda-connect/distinfo @@ -1,5 +1,5 @@ -TIMESTAMP = 1752218291 -SHA256 (go/net_redpanda-connect/connect-v4.60.0/v4.60.0.mod) = 1b37bd61125b3b38b710b9c2819f8daf6fadbed10ac18f22d2840e237b37f42f -SIZE (go/net_redpanda-connect/connect-v4.60.0/v4.60.0.mod) = 24329 -SHA256 (go/net_redpanda-connect/connect-v4.60.0/v4.60.0.zip) = 214f243daf9f9af94f58749aac84d09cf514000c2b2af8edde1da21d00571cf5 -SIZE (go/net_redpanda-connect/connect-v4.60.0/v4.60.0.zip) = 2813442 +TIMESTAMP = 1752329135 +SHA256 (go/net_redpanda-connect/connect-v4.60.1/v4.60.1.mod) = 1b37bd61125b3b38b710b9c2819f8daf6fadbed10ac18f22d2840e237b37f42f +SIZE (go/net_redpanda-connect/connect-v4.60.1/v4.60.1.mod) = 24329 +SHA256 (go/net_redpanda-connect/connect-v4.60.1/v4.60.1.zip) = 09a32c8c03683cf2f8db534d72b3b34e29c6bc5a720395841977b078237623fb +SIZE (go/net_redpanda-connect/connect-v4.60.1/v4.60.1.zip) = 2813484 diff --git a/net/rubygem-google-cloud-pubsub/Makefile b/net/rubygem-google-cloud-pubsub/Makefile index b616d5fc656e..f426c1cd3d88 100644 --- a/net/rubygem-google-cloud-pubsub/Makefile +++ b/net/rubygem-google-cloud-pubsub/Makefile @@ -1,5 +1,5 @@ PORTNAME= google-cloud-pubsub -PORTVERSION= 2.22.0 +PORTVERSION= 2.23.0 CATEGORIES= net rubygems MASTER_SITES= RG @@ -13,9 +13,9 @@ WWW= https://cloud.google.com/ruby/docs/reference/google-cloud-pubsub/latest/ \ LICENSE= APACHE20 LICENSE_FILE= ${WRKSRC}/LICENSE -RUN_DEPENDS= rubygem-concurrent-ruby>=1.1<2:devel/rubygem-concurrent-ruby \ - rubygem-google-cloud-core>=1.5<2:net/rubygem-google-cloud-core \ - rubygem-google-cloud-pubsub-v1>=1.7<2:net/rubygem-google-cloud-pubsub-v1 \ +RUN_DEPENDS= rubygem-concurrent-ruby>=1.3<2:devel/rubygem-concurrent-ruby \ + rubygem-google-cloud-core>=1.8<2:net/rubygem-google-cloud-core \ + rubygem-google-cloud-pubsub-v1>=1.11<2:net/rubygem-google-cloud-pubsub-v1 \ rubygem-retriable>=3.1<4:devel/rubygem-retriable USES= gem diff --git a/net/rubygem-google-cloud-pubsub/distinfo b/net/rubygem-google-cloud-pubsub/distinfo index 8bbf7e6da99a..1aab9b49ea84 100644 --- a/net/rubygem-google-cloud-pubsub/distinfo +++ b/net/rubygem-google-cloud-pubsub/distinfo @@ -1,3 +1,3 @@ -TIMESTAMP = 1744289328 -SHA256 (rubygem/google-cloud-pubsub-2.22.0.gem) = 12b27c4d4253821de016c5d912f13fdbb589caaa89fcea5f2fee842a94391356 -SIZE (rubygem/google-cloud-pubsub-2.22.0.gem) = 92160 +TIMESTAMP = 1752266248 +SHA256 (rubygem/google-cloud-pubsub-2.23.0.gem) = 171d11c1cb15e1462f9dc22afead2c23eea6c77a067b52c4e7c7de3e7cd2fbc7 +SIZE (rubygem/google-cloud-pubsub-2.23.0.gem) = 92160 diff --git a/net/rubygem-opennebula/Makefile b/net/rubygem-opennebula/Makefile index 8a991c899d7d..893d9e5bd016 100644 --- a/net/rubygem-opennebula/Makefile +++ b/net/rubygem-opennebula/Makefile @@ -1,5 +1,5 @@ PORTNAME= opennebula -PORTVERSION= 6.8.3 +PORTVERSION= 7.0.0 CATEGORIES= net rubygems MASTER_SITES= RG @@ -15,7 +15,6 @@ RUN_DEPENDS= rubygem-ipaddress>=0:net/rubygem-ipaddress \ rubygem-json>=0:devel/rubygem-json \ rubygem-nokogiri>=0:textproc/rubygem-nokogiri \ rubygem-parse-cron>=0:textproc/rubygem-parse-cron \ - rubygem-rbvmomi2>=0:net/rubygem-rbvmomi2 \ rubygem-treetop>=0:devel/rubygem-treetop \ rubygem-xmlrpc>=0:net/rubygem-xmlrpc diff --git a/net/rubygem-opennebula/distinfo b/net/rubygem-opennebula/distinfo index 9f221af8a26a..a2d0d2f91b32 100644 --- a/net/rubygem-opennebula/distinfo +++ b/net/rubygem-opennebula/distinfo @@ -1,3 +1,3 @@ -TIMESTAMP = 1715843766 -SHA256 (rubygem/opennebula-6.8.3.gem) = 642929196697ff0c4f1c15d659858e7f9e6bbf969af39f0b23c60c08e7695876 -SIZE (rubygem/opennebula-6.8.3.gem) = 224256 +TIMESTAMP = 1752266250 +SHA256 (rubygem/opennebula-7.0.0.gem) = f5cfc7277bea36c1b7f297f52aa812046471e97db4287f7b723b84e8aa97fe2c +SIZE (rubygem/opennebula-7.0.0.gem) = 114688 |