diff options
Diffstat (limited to 'net-mgmt/scli/files/patch-ab')
| -rw-r--r-- | net-mgmt/scli/files/patch-ab | 991 |
1 files changed, 0 insertions, 991 deletions
diff --git a/net-mgmt/scli/files/patch-ab b/net-mgmt/scli/files/patch-ab deleted file mode 100644 index db0464b514f8..000000000000 --- a/net-mgmt/scli/files/patch-ab +++ /dev/null @@ -1,991 +0,0 @@ ---- /dev/null Fri May 24 23:07:13 2002 -+++ doc/modes.texinfo Fri May 24 23:06:43 2002 -@@ -0,0 +1,988 @@ -+@verbatim -+ATM MODE -+======== -+ -+The atm scli mode is based on the ATM-MIB as published in RFC 2515. -+This mode is intended to display and configure ATM parameters. -+ -+ `show atm interface info <regexp>' -+ `show atm interface details <regexp>' -+ -+The show atm interface info command displays summary information for -+all selected ATM interfaces. The optional regular expression <regexp> -+is matched against the interface descriptions to select the interfaces -+of interest. The command generates a table with the following columns: -+ -+ -+INTERFACE network interface number -+ -+ -+The show atm interface details command describes the selected -+ATM interfaces in more detail. The optional regular expression -+<regexp> is matched against the interface descriptions to -+select the interfaces of interest. -+ -+BRIDGE MODE -+=========== -+ -+The scli bridge mode is based on the BRIDGE-MIB as published in RFC -+1493. It provides commands to browse information specific to LAN -+bridges (also known as layer two switches). -+ -+ `show bridge info' -+ `show bridge ports' -+ `show bridge stp ports' -+ `show bridge forwarding' -+ `show bridge filter' -+ `show bridge stats' -+ `monitor bridge stats' -+ -+The show bridge info command displays summary information about a -+bridge, such as the number of ports and the supported bridging -+functions and associated parameters. -+ -+The show bridge ports command displays information about the bridge -+ports. -+ -+The show bridge stp ports command displays information about the bridge -+ports which participate in the spanning tree protocol. The command -+generates a table with the following columns: -+ -+ -+ PORT port number -+ PRIO spanning tree priority of the port -+ STATE spanning tree status of the port -+ P-COST path costs for this port -+ D-ROOT designated root port -+ D-COST designated costs -+ D-BRIDGE designated bridge -+ D-PORT designated port -+ -+ -+The status is encoded in two characters. The first character -+indicates whether STP on the port is enabled (E) or disabled -+(D). The second character indicates the current status -+(D=disabled, B=blocking, I=listening, L=learning, F=forwarding, -+X=broken). -+ -+The show bridge forwarding command displays the forwarding -+data base used by transparent bridges. The command generates -+a table with the following columns: -+ -+ PORT port number -+ STATUS status of the forwarding entry -+ ADDRESS address associated with the port -+ NAME name of the address (where known) -+ VENDOR vendor info derived from the address -+ -+ -+The show bridge filter command shows filtering information. -+ -+The show bridge stats command displays per port statistics for -+transparent bridges. The command generates a table with the -+following columns: -+ -+ PORT port number -+ I-FPS input frames per second -+ O-FPS output frames per second -+ D-FPS discarded frames per second -+ DESCRIPTION description of the port -+ -+ -+The monitor bridge stats command shows the same -+information as the show bridge stats command. Theinformation is updated periodically. -+ -+CISCO MODE -+========== -+ -+The cisco scli mode is used to display and configure cisco parameters. -+ -+ `show cisco ip accounting info' -+ `show cisco ip accounting current' -+ `show cisco ip accounting snapshot' -+ `monitor cisco ip accounting current' -+ `monitor cisco ip accounting snapshot' -+ -+cisco IP accounting info -+ -+cisco IP current accounting data -+ -+cisco IP snapshot accounting data -+ -+cisco IP current accounting data -+ -+cisco IP snapshot accounting data -+ -+DISMAN MODE -+=========== -+ -+The disman scli mode is based on the DISMAN-SCRIPT-MIB as published in -+RFC 3165 and the DISMAN-SCHEDULE-MIB as published in RFC 3231. It -+allows to browse and configure distributed managers. -+ -+ `create disman script <owner> <name> <description>' -+ `create disman run <owner> <name> <args>' -+ `show disman languages' -+ `show disman script info' -+ `show disman script details' -+ `show disman launch info' -+ `show disman launch details' -+ `show disman run info' -+ `show disman run details' -+ `show disman scheduler info' -+ `show disman scheduler details' -+ `monitor disman run' -+ -+... -+ -+... -+ -+languages supported by the distributed manager -+ -+script summary information -+ -+scripts installed at the distributed manager -+ -+launch summary information -+ -+launch buttons installed on the distributed manager -+ -+summary information about running scripts -+ -+running scripts on the distributed manager -+ -+scheduler information -+ -+schedules on the distributed manager -+ -+monitor running scripts -+ -+ENTITY MODE -+=========== -+ -+The entity scli mode is based on the ENTITY-MIB as published in RFC -+2737. It provides commands to browse the physical entities or physical -+components what make up a managed system. -+ -+ `show entity info' -+ `show entity details' -+ `show entity containment' -+ -+The show entity info command displays summary information about the -+physical entities that compose the system. The command generates a -+table with the following columns: -+ -+ -+ ENTITY entity number -+ CLASS class of the entity (see below) -+ NAME name of the entity -+ DESCRIPTION description of the entity -+ -+ -+The show entity details command describes the physical entities -+in more detail. -+ -+The show entity containment command displays the physical entity -+containment hierarchy. -+ -+ETHERNET MODE -+============= -+ -+The ethernet scli mode is based on the EtherLike-MIB as published in -+RFC 2665 and the MAU-MIB as published in RFC 2668. -+ -+ `show ethernet mau' -+ `show ethernet stats' -+ `monitor ethernet stats' -+ -+The show ethernet mau command displays information about the medium -+attachment units (MAUs) for each ethernet port. The command generates a -+table which has the following columns: -+ -+ -+ INTERFACE network interface number -+ MAU medium attachment unit number per interface -+ STATUS status of the medium attachment unit -+ MEDIA media availability -+ JABBER jabber state of the medium attachment unit -+ AUTONEG autonegation capabilities -+ TYPE type of the medium attachment unit -+ -+ -+The show ethernet stats command displays ethernet specific -+statistics for each ethernet interface. The command outputs -+a table which has the following columns: -+ -+ INTERFACE network interface number -+ ALIGN alignement errors per second -+ FCS frame check sequence errors per second -+ RCV MAC receive errors per second -+ LONG frames exceeding maximum frame size per second -+ DEFER deferred transmission per second -+ SCOL single collisions per second -+ MCOLR multiple collisions per second -+ XCOL excessive collisions per second -+ LCOL late collisions per second -+ XMIT MAC transmit errors per second -+ CARR carrier sense errors per second -+ -+ -+The monitor ethernet stats command shows the same information -+as the show ethernet stats command. The information is updated -+periodically. -+ -+INTERFACE MODE -+============== -+ -+The scli interface mode is based on the IF-MIB as published in RFC -+2863. It provides commands to browse, monitor and configure arbitrary -+network interfaces. -+ -+ `set interface status <regexp> <status>' -+ `set interface alias <regexp> <string>' -+ `set interface notifications <regexp> <value>' -+ `set interface promiscuous <regexp> <bool>' -+ `show interface info [<regexp>]' -+ `show interface details [<regexp>]' -+ `show interface stack [<regexp>]' -+ `show interface stats [<regexp>]' -+ `monitor interface stats [<regexp>]' -+ `alert interface status <regexp> [<regexp>]' -+ `dump interface' -+ -+The set interface status command modifies the administrative status of -+all selected interfaces. The regular expression <regexp> is matched -+against the interface descriptions to select the interfaces of -+interest. The <value> parameter must be one of the strings "up", -+"down", or "testing". -+ -+The set interface alias command assigns the alias name <string> to the -+selected interfaces. The alias name provies a non-volatile 'handle' -+which can be used by management applications to better identify -+interfaces. The regular expression <regexp> is matched against the -+interface descriptions to select the interfaces. -+ -+The set interface notifications command controls whether the selected -+interfaces generate linkUp and linkDown notifications. The regular -+expression <regexp> is matched against the interface descriptions to -+select the interfaces. The <value> parameter must be one of the strings -+"enabled" or "disabled". -+ -+The set interface promiscuous command controls whether the selected -+interfaces operate in promiscuous mode or not. The regular expression -+<regexp> is matched against the interface descriptions to select the -+interfaces. The <bool> parameter must be one of the strings "true" or -+"false". -+ -+The show interface info command displays summary information for all -+selected interfaces. The optional regular expression <regexp> is -+matched against the interface descriptions to select the interfaces of -+interest. The command generates a table with the following columns: -+ -+ -+ INTERFACE network interface number -+ STATUS interface status (see below) -+ MTU maximum transfer unit -+ TYPE type of the network interface -+ SPEED speed in bits per second -+ NAME name of the network interface -+ DESCRIPTION description of the network interface -+ -+ -+The status is encoded in four characters. The first character -+indicates the administrative status (U=up, D=down, T=testing). -+The second character indicates the operational status (U=up, -+D=down, T=testing, ?=unknown, O=dormant, N=not-present, -+L=lower-layer-down). The third character indicates whether a -+connector is present (C=connector, N=none) and the fourth -+character indicates whether the interface is in promiscuous -+mode (P=promiscuous, N=normal). -+ -+The show interface details command describes the selected -+interfaces in more detail. The optional regular expression -+<regexp> is matched against the interface descriptions to -+select the interfaces of interest. -+ -+The show interface stack command shows the stacking order -+of the interfaces. -+ -+The show interface stats command displays network -+interface statistics for all selected interfaces. -+The optional regular expression <regexp> is matched -+against the interface description to select the -+interfaces. The command outputs a table which has -+the following columns: -+ -+ INTERFACE network interface number -+ STATUS interface status (see above) -+ I-BPS input bytes per second -+ O-BPS output bytes per second -+ I-PPS input packets per second -+ O-PPS output packets per second -+ I-ERR input errors per second -+ O-ERR output errors per second -+ DESCRIPTION description of the network interface -+ -+ -+The monitor interface stats command shows the same -+information as the show interface stats command. The -+information is updated periodically. -+ -+The alarm interface status command generates alerts for -+interfaces that are in given status. -+ -+The dump interface command generates a sequence of scli commands -+which can be used to restore the interface configuration. -+ -+IP MODE -+======= -+ -+The ip scli mode is based on the IP-MIB as published in RFC 2011, the -+IP-FORWARD-MIB as published in RFC 2096, the IP-TUNNEL-MIB as published -+in RFC 2667 and the RFC1213-MIB as published in RFC 1213. It provides -+commands to browse, monitor and configure IP protocol engines. -+ -+ `set ip forwarding <value>' -+ `set ip ttl <number>' -+ `show ip info' -+ `show ip forwarding' -+ `show ip addresses' -+ `show ip tunnel' -+ `show ip mapping' -+ `dump ip' -+ -+The set ip forwarding command controls whether the IP protocol engine -+forwards IP datagrams or not. The <value> parameter must be one of the -+strings "enabled" or "disabled". -+ -+The set ip ttl command can be used to change the default time to live -+(TTL) value used by the IP protocol engine. The <number> parameter must -+be a number between 1 and 255 inclusive. -+ -+The show ip info command displays paramters of the IP protocol engine, -+such as the default TTL or whether the node is forwarding IP packets. -+ -+The show ip forwarding command displays the IP forwarding data base. -+The command generates a table with the following columns: -+ -+ -+ DESTINATION -+ NEXT HOP -+ TYPE -+ PROTO -+ INTERFACE -+ -+ -+The show ip addresses command displays the IP addresses assigned -+to network interfaces. The command generates a table with the -+following columns: -+ -+ INTERFACE network interface number -+ ADDRESS IP address -+ PREFIX IP address prefix length -+ NAME name of the IP address -+ -+ -+The show ip tunnel command displays information about existing -+IP tunnels. -+ -+The show ip mapping command displays the mapping of IP address -+to lower layer address (e.g., IEEE 802 addresses). The command -+generates a table with the following columns: -+ -+ INTERFACE network interface number -+ STATUS status of the mapping entry -+ ADDRESS IP address -+ ADDRESS lower layer address -+ -+ -+The dump ip command generates a sequence of scli commands -+which can be used to restore the IP configuration. -+ -+NETSNMP MODE -+============ -+ -+The netsnmp scli mode is used to display and configure netsnmp specific -+parameters. It is based on the UCD-SNMP-MIB. -+ -+ `set netsnmp debugging <value>' -+ `set netsnmp restart' -+ `show netsnmp info' -+ `show netsnmp load' -+ `show netsnmp exec' -+ `show netsnmp proc' -+ `dump netsnmp' -+ -+The set netsnmp debugging command controls whether the agent generates -+debug messages or not. The <value> parameter must be one of the strings -+"enabled" or "disabled". -+ -+The set netsnmp restart command restarts the agent. -+ -+The show netsnmp info command shows general information about the -+netsnmp/ucdsnmp agent such as the version number and the software -+configuration. -+ -+The show netsnmp load command shows the system's load. -+ -+The show netsnmp exec command shows information about pre-configured -+commands that can be invoked. -+ -+The show netsnmp proc command shows information about which processes -+netsnmp watches. -+ -+The dump netsnmp command generates a sequence of scli commands which -+can be used to restore the netsnmp specific configuration. -+ -+NORTEL MODE -+=========== -+ -+The nortel scli mode allows to manipulate virtual lans (vlans) on -+nortel bridges. It is based on the RAPID-CITY MIB which is implemented -+at least on the baystack bridges. -+ -+ `create nortel bridge vlan <vlanid> <name>' -+ `delete nortel bridge vlan <regexp>' -+ `set nortel bridge vlan ports <regexp> <ports>' -+ `set nortel bridge vlan default <string> <ports>' -+ `show nortel bridge vlan info [<regexp>]' -+ `show nortel bridge vlan details [<regexp>]' -+ `show nortel bridge vlan ports' -+ `dump nortel bridge vlan' -+ -+The create nortel bridge vlan command is used to create a new vlan with -+the given <vlanid> and <name>. -+ -+The delete nortel bridge vlan command deletes all selected vlans. The -+regular expression <regexp> is matched against the vlan names to select -+the vlans that should be deleted. -+ -+The set nortel bridge vlan ports command allows to assign ports to -+port-based vlans. The regular expression <regexp> is matched against -+the vlan names to select the vlans that should be modified. The <ports> -+argument contains a comma separated list of port numbers or port number -+ranges, e.g. 1,5,7-8. -+ -+The set nortel bridge vlan default command allows to assign ports to a -+default vlan. The <string> argument is matched against the vlan names -+to select the vlan. The <ports> argument contains a comma separated -+list of port numbers or port number ranges, e.g. 1,5,7-8. -+ -+The show nortel bridge vlan info command shows summary information -+about all selected vlans. The optional regular expression <regexp> is -+matched against the vlan names to select the vlans of interest. The -+command generates a table with the following columns: -+ -+ -+ VLAN vlan number -+ STATUS status of the vlan (see below) -+ NAME vlan name -+ PORTS ports assigned to the vlan -+ -+ -+The status is encoded in four characters. The first character -+indicates the status of the row (A=active, S=not in service, -+R=not ready). The second character indicates vlan type (P=B -+port, I=IP-subnet, O=protocol, S=src address, D=dst address). -+The third character indicates the priority of the vlan (H=high, -+N=normal) and the fourth character indicates whether routing -+is enabled (R=routing, N=no routing). -+ -+The show nortel bridge vlan details command describes the -+selected vlans in more detail. The optional regular expression -+<regexp> is matched against the vlan names to select the vlans -+of interest. -+ -+The show nortel bridge vlan ports command shows information -+for each vlan port. The command generates a table with the -+following columns: -+ -+ PORT port number -+ FLAGS port vlan flags (see below) -+ DEFAULT default vlan number -+ VLANS vlan numbers the port is member of -+ -+ -+The flags are encoded in four characters. The first character -+indicates the port type (A=access, T=trunk). The second character -+indicates whether the port tags frames (T=tagging, N=none). The -+third character indicates whether the port discards tagged frames -+(D=discard, N=none) and the fourth character indicates whether -+the port discards untagged frames (D=discard, N=none). -+ -+The dump nortel bridge vlan command generates a sequence of scli -+commands which can be used to restore the vlan configuration. -+ -+OSPF MODE -+========= -+ -+The scli ospf mode is used to display and configure OSPF parameters. -+ -+ `show ospf area' -+ `show ospf info' -+ `show ospf interface' -+ -+show OSPF areas -+ -+general OSPF information -+ -+show OSPF interfaces -+ -+PRINTER MODE -+============ -+ -+The scli printer mode is based on the Printer-MIB as published in RFC -+1759 and some updates currently being worked on in the IETF Printer MIB -+working group. -+ -+ `show printer info' -+ `show printer covers' -+ `show printer inputs' -+ `show printer outputs' -+ `show printer markers' -+ `show printer supplies' -+ `show printer interpreter' -+ `show printer console display' -+ `show printer console lights' -+ `show printer alerts' -+ `monitor printer console display' -+ `monitor printer console lights' -+ `monitor printer alerts' -+ -+The show printer info command shows general information about the -+printer including global status information. -+ -+The show printer covers command shows information about the covers of a -+printer. -+ -+The show printer inputs command shows information about the input -+sub-units of a printer which provide media for input to the printing -+process. -+ -+The show printer output command shows information about the output -+sub-units of a printer capable of receiving media delivered from the -+printing process. -+ -+The show printer markers command shows information about the marker -+sub-units of a printer which produce marks on the print media. -+ -+The show printer supplies command shows information about the supplies -+which are consumed and the waste produced by the markers of a printer. -+ -+The show printer interpreter command shows information about the page -+description language and control language interpreters supported by the -+printer. -+ -+The show printer console display command shows the current contents of -+the printer's display. The command generates a table with the following -+columns: -+ -+ -+ PRINTER logical printer number -+ LINE display line number -+ TEXT contents of the display line -+ -+ -+The show printer console lights command shows the current -+status of the printer's lights. The command generates a table -+with the following columns: -+ -+ PRINTER logical printer number -+ LIGHT number identifying the light/led -+ DESCRIPTION description of the light/led -+ STATUS current status (on, off, blink) -+ COLOR current color of the light -+ -+ -+The show printer alerts command displays the list of active -+printer alerts including the alert code, the alert severity, -+the alert description, the alert time, the alert location and -+the personel required to handle the alert. -+ -+The monitor printer console display command shows the same -+information as the show printer console display command. The -+information is updated periodically. -+ -+The monitor printer console lights command shows the same -+information as the show printer console lights command. The -+information is updated periodically. -+ -+The monitor printer alerts command shows the same information -+as the show printer alerts command. The information is updated -+periodically. -+ -+SCLI MODE -+========= -+ -+The scli mode provides commands that can be used to display and -+manipulate the internal state of the scli interpreter. -+ -+ `open <nodename> [<community>]' -+ `close' -+ `create scli plugin <module>' -+ `delete scli plugin <module>' -+ `exit' -+ `help' -+ `history' -+ `create scli alias <name> <value>' -+ `delete scli alias <regexp>' -+ `set scli regex [<regexp>]' -+ `set scli debugging [<regexp>]' -+ `set scli pager <pager>' -+ `set scli format <fmt>' -+ `show scli info' -+ `show scli commands' -+ `show scli aliases' -+ `show scli modes [<regex>]' -+ `show scli schema [<regex>]' -+ `show scli alarm info' -+ -+The open command establishes an association to a remote SNMP agent. The -+<nodename> argument is the DNS name or the IP address of the remote -+node. Scli will try to talks to this node's SNMP agent on the default -+port number (usually 161) using the default transport mapping (usually -+SNMP over UDP). The optional <community> argument is the community -+string needed to communicate with the remote SNMP agent. The default -+community string is "public". Opening an association while an -+association is already established is not considered an error. The -+existing established association will be closed automatically before an -+attempt to create a new association is started. -+ -+The close command closes an established association to a remote SNMP -+agent. Invoking the close command when no association is established is -+not considered an error and will do just nothing. -+ -+The create scli plugin command dynamically loads an scli mode into a -+running scli process. This can be used to dynamically extend scli with -+modules coming from other sources. Dynamic loadable modules also -+simplify the development and management of site-specific modules. -+ -+The delete scli plugin command removes a previously loaded modules from -+a running scli process. -+ -+The exit command terminates the scli interpreter. An end of file in the -+standard input stream will also terminate the the scli interpreter. -+ -+The help command displays some help information including a list of all -+top-level scli commands. -+ -+The history command displays the scli command history list with line -+numbers. -+ -+The create scli alias command creates the alias <name> for the scli -+command (fragment) <value>. If the alias <name> already exists, then -+the new <value> will be assigned to the existing alias. -+ -+The delete scli alias command removes previously defined aliases from -+the scli interpreter. The regular expression <regexp> is matched -+against all alias names in order to select the aliases that are deleted. -+ -+The set scli regex command controls how scli matches regular -+expressions. The optional regular expression <regexp> is matched -+against the regular expression options. A successful match turns a -+regular expression option on while an unsuccessful match turns a -+regular expression option off. Invoking the command without the -+<regexp> argument will turn all regular expression options off. The -+currently defined regular expression options are "extended" for POSIX -+extended regular expressions and "case-insensitive" for case -+insensitive matches. -+ -+The set scli debugging command sets the debugging level of the SNMP -+engine. The optional regular expression <regexp> is matched against the -+debugging levels. A successful match turns a debugging level on while -+an unsuccessful match turns a debugging level off. Invoking the command -+without the <regexp> argument will turn all debugging levels off. The -+currently defined debugging levels are "session" for the SNMP session -+layer, "request" for the SNMP request handling layer, "transport" for -+the SNMP transport layer, "packet" for the SNMP packet layer, and -+"asn1" for the ASN.1 coding layer. -+ -+The set scli pager command defines the shell command which is used as a -+pager if the output produced by an scli command does not fit on a -+single screen. The output is passed to the <pager> shell command via -+its standard input stream. -+ -+The set scli format command defines the output format used by -+subsequent scli commands. The currently supported formats are "scli" -+and "xml". The "scli" format is the default output format and described -+in this documentation. The "xml" output format is experimental and -+therefore not described here. -+ -+The show scli info command displays the current status of the scli -+interpreter. -+ -+The show scli commands command displays the scli command tree. The -+full command syntax is displayed for each leaf node. -+ -+The show scli aliases command lists all scli command aliases. The -+first column in the generated table lists the aliase names while the -+second column shows the alias values. -+ -+The show scli modes command shows information about the scli modes. An -+scli mode is a logical grouping of related commands (e.g., all commands -+that deal with printers). The optional regular expression <regex> can -+be use to select a subset of the available scli modes. -+ -+The show scli schema command produces xml schema definitions for the -+selected scli modes. An scli mode is a logical grouping of related -+commands (e.g., all commands that deal with printers). The optional -+regular expression <regex> can be use to select a subset of the -+available scli modes. -+ -+The show scli alarm info command displays summary information about all -+known alarms. -+ -+SNMP MODE -+========= -+ -+The snmp scli mode is based on the SNMPv2-MIB as published in RFC 1907, -+the SNMP-FRAMEWORK-MIB as published in RFC 2571, the -+SNMP-USER-BASED-SM-MIB as published in RFC 2574, the -+SNMP-VIEW-BASED-ACM-MIB as published in RFC 2575, the SNMP-TARGET-MIB -+as published in RFC 2573, and the SNMP-NOTIFICATION-MIB as published in -+RFC 2573. -+ -+ `create snmp vacm member <name> <group> [<model>]' -+ `delete snmp vacm member <regex-name> <regex-group> [<model>]' -+ `set snmp authentication traps <status>' -+ `show snmp engine' -+ `show snmp resources' -+ `show snmp vacm member' -+ `show snmp vacm access' -+ `show snmp vacm views' -+ `show snmp usm users' -+ `show snmp target addresses' -+ `show snmp target parameters' -+ `show snmp notification targets' -+ `dump snmp' -+ -+The create snmp vacm member commands can be used to assign new members -+(security names) to vacm groups. New groups are created if they do not -+exist. -+ -+The delete snmp vacm member commands can be used to delete members -+(security names) from vacm groups. Groups are deleted if the last -+member is deleted. -+ -+The set snmp authentication traps command controls whether the SNMP -+engine generates authentication failure notifications. The <value> -+parameter must be one of the strings "enabled" or "disabled". -+ -+The show snmp engine command displays information about the SNMP -+protocol engine such as the number of boots, the current time relative -+to the last boot and the maximum message size. -+ -+The show snmp resources command displays information about the MIB -+resources supported by the SNMP agent. -+ -+The show snmp vacm member command displays the mapping of security -+names to group names. The command generates a table with the following -+columns: -+ -+ -+ ROW row storage type and status -+ MOD security model -+ NAME member name (security name) -+ GROUP name of the vacm group -+ -+ -+The show snmp vacm access command display the access control -+rules for the security groups. The command generates a table -+with the following columns: -+ -+ ROW row storage type and status -+ GROUP security group name -+ MOD security model -+ LVL security level (--, a-, ap) -+ CTX context name -+ MATCH match (exact or prefix) -+ READ view name for read access -+ WRITE view name for write access -+ NOTIFY view name for notification -+ -+ -+The show snmp vacm views command displays MIB view definitions. -+The command generates a table with the following columns: -+ -+ ROW row storage type and status -+ VIEW view name -+ TYPE access to the view subtree (incl/excl) -+ PREFIX object identifier wildcard prefix -+ -+ -+The show snmp usm users command displays the configured users. -+The command generates a table with the following columns: -+ -+ ROW row storage type and status -+ USER USM user name -+ NAME security name of the USM user -+ AUTH authentication protocol -+ PRIV privacy protocol -+ -+ -+The show snmp target addresses command displays information -+about the configured SNMP target addresses. The command -+generates a table with the following columns: -+ -+ ROW row storage type and status -+ TARGET target name -+ DOMAIN transport domain -+ ADDRESS transport address -+ TMOUT timeout value in ms -+ RETRY number of retries -+ PARAMS associated parameters -+ TAGS tag list -+ -+ -+The show snmp target parameters command displays information -+about the configured SNMP target parameters. The command -+generates a table with the following columns: -+ -+ ROW row storage type and status -+ PARAMS parameter name -+ NAME security name -+ -+ -+The show snmp notification targets command displays information -+about the configured SNMP notification targets. The command -+generates a table with the following columns: -+ -+ ROW row storage type and status -+ NAME notification target name -+ TYPE notification type -+ TAG tag reference to targets -+ -+ -+The dump snmp command generates a sequence of scli commands -+which can be used to restore the engine configuration. -+ -+SYSTEM MODE -+=========== -+ -+The system scli mode is primarily based on the SNMPv2-MIB as published -+in RFC 1907 and the HOST-RESOURCES-MIB as publisched in RFC 2790. It -+can be used to browse and configure system parameters and -+characteristics. -+ -+ `set system contact <string>' -+ `set system name <string>' -+ `set system location <string>' -+ `show system info' -+ `show system devices' -+ `show system storage' -+ `show system mounts' -+ `show system processes [<regexp>]' -+ `monitor system storage' -+ `monitor system processes [<regexp>]' -+ `dump system' -+ -+The set system contact command configures the system's contact -+information. The <string> argument should include information on how to -+contact a person who is responsible for this system. -+ -+The set system name command configures the systems's name. By -+convention, this is the system's fully-qualified domain name. -+ -+The set system location command configures the system's physical -+location. -+ -+The show system info command shows general information about the system. -+ -+The show system devices command shows a list of system devices. The -+command generates a table with the following columns: -+ -+ -+ INDEX device number -+ STATUS current status of the device -+ DESCRIPTION description of the device -+ -+ -+The show system storage command displays information about the -+logical areas attached in the system. The command generates a -+table with the following columns: -+ -+ INDEX logical storage area number -+ DESCRIPTION description of the storage area -+ TYPE logical storage area type -+ SIZE total size of the storage area -+ USED amount of storage in use -+ FREE amount of storage available -+ USE% used storage in percent -+ -+ -+The show system mounts command shows the list of filesystems -+mounted on the system. The command generates a table with the -+following columns: -+ -+ INDEX filesystem identification number -+ LOCAL local root path name of the filesystem -+ REMOTE remote server and root path name (if any) -+ TYPE filesytem type (if known) -+ OPTIONS access mode (ro/rw) and boot flag -+ -+ -+The show system processes command display information about the -+processes currently running on the system. The regular expression -+<regexp> is matched against the command executed by the process -+to select the processes of interest.The command generates a table -+with the following columns: -+ -+ PID process identification number -+ S status of the process (see below) -+ T type of the process (see below) -+ MEMORY memory used by the process -+ TIME CPU time used by the process -+ COMMAND command executed by the process -+ -+ -+The process status values are C=running, R=runnable, -+S=not runnable, and Z=invalid. The process types values are -+?=unknown, O=operating system, D=device driver, and A=application. -+ -+The monitor system storage command shows the same -+information as the show system storage command. The -+information is updated periodically. -+ -+The monitor system processes command show the same -+information as the show system processes command. The -+information is updated periodically. -+ -+The dump system command generates a sequence of scli commands -+which can be used to restore the system configuration. -+ -+TCP MODE -+======== -+ -+The scli tcp mode is based on the TCP-MIB as published in RFC 2012. It -+provides commands to browse information specific to the TCP transport -+protocol. -+ -+ `show tcp listener' -+ `show tcp connections' -+ `monitor tcp connections' -+ -+The show tcp listener command displays the listening TCP endpoints. -+ -+The show tcp connections command displays the connected TCP endpoints -+including the current state of the connection as seen by the remote -+SNMP agent. -+ -+The monitor tcp connections command displays the connected TCP -+endpoints including the current state of the connection as seen by the -+remote SNMP agent. The information is updated periodically. -+ -+UDP MODE -+======== -+ -+The scli udp mode is based on the UDP-MIB as published in RFC 2013. It -+provides commands to browse information specific to the UDP transport -+protocol. -+ -+ `show udp listener' -+ `show udp stats' -+ -+The show udp listener command displays the listening UDP endpoints. -+ -+The show udp statistics about datagrams received or sent. -+ -+@end verbatim |