diff options
Diffstat (limited to 'mail/exim/files/configure.default')
| -rw-r--r-- | mail/exim/files/configure.default | 328 |
1 files changed, 328 insertions, 0 deletions
diff --git a/mail/exim/files/configure.default b/mail/exim/files/configure.default new file mode 100644 index 000000000000..962fb9579aca --- /dev/null +++ b/mail/exim/files/configure.default @@ -0,0 +1,328 @@ +###################################################################### +# Runtime configuration file for Exim # +###################################################################### + + +# This is a default configuration file which will operate correctly in +# uncomplicated installations. Please see the manual for a complete list +# of all the runtime configuration options that can be included in a +# configuration file. + + +# This file is divided into several parts, all but the last of which are +# terminated by a line containing the word "end". The parts must appear +# in the correct order, and all must be present (even if some of them are +# in fact empty). Blank lines, and lines starting with # are ignored. + + + +###################################################################### +# MAIN CONFIGURATION SETTINGS # +###################################################################### + +# Specify your host's canonical name here. If this option is not set, the +# uname() function is called to obtain the name. + +# primary_hostname = + + +# Specify the domain you want to be added to all unqualified addresses +# here. Unqualified addresses are accepted only from local callers by +# default. See the receiver_unqualified_{hosts,nets} options if you want +# to permit unqualified addresses from remote sources. If this option is +# not set, the primary_hostname value is used for qualification. + +# qualify_domain = + + +# If you want unqualified recipient addresses to be qualified with a different +# domain to unqualified sender addresses, specify the recipient domain here. +# If this option is not set, the qualify_domain value is used. + +# qualify_recipient = + + +# Specify your local domains as a colon-separated list here. If this option +# is not set (i.e. not mentioned in the configuration file), the +# qualify_recipient value is used as the only local domain. If you do not want +# to do any local deliveries, uncomment the following line, but do not supply +# any data for it. This sets local_domains to an empty string, which is not +# the same as not mentioning it at all. An empty string specifies that there +# are no local domains; not setting it at all causes the default value (the +# setting of qualify_recipient) to be used. + +# local_domains = + + +# If you want to accept mail addressed to your host's literal IP address, for +# example, mail addressed to "user@[111.111.111.111]", then uncomment the +# following line, or supply the literal domain(s) as part of "local_domains" +# above. + +# local_domains_include_host_literals + + +# No local deliveries will ever be run under the uids of these users (a colon- +# separated list). An attempt to do so gets changed so that it runs under the +# uid of "nobody" instead. This is a paranoic safety catch. Note the default +# setting means you cannot deliver mail addressed to root as if it were a +# normal user. This isn't usually a problem, as most sites have an alias for +# root that redirects such mail to a human administrator. + +exim_user = bin +exim_group = mail +never_users = root + + +# The setting below causes Exim to do a reverse DNS lookup on all incoming +# IP calls, in order to get the true host name. If you feel this is too +# expensive, you can specify the networks for which a lookup is done, or +# remove the setting entirely. + +host_lookup_nets = 0.0.0.0/0 + + +# Exim contains support for the Realtime Blocking List (RBL) that is being +# maintained as part of the DNS. See http://maps.vix.com/rbl/ for background. +# Uncommenting the following line will make Exim reject mail from any +# host whose IP address is blacklisted in the RBL at maps.vix.com. + +# rbl_domains = rbl.maps.vix.com + + +# The setting below locks out the use of your host as a mail relay by any +# other host. If you want to permit relaying through your host from certain +# hosts or IP networks, you need to vary this option and/or make use of the +# other three options in the set sender_{host,net}_{accept,reject}_relay. +# See the section of the manual entitled "Control of relaying" for more info. +# Removing this setting altogether is not recommended, because there are many +# unscrupulous people out there who will make use of open relays to try to +# disguise the source of unsolicited bulk mail. + +sender_host_accept_relay = localhost + + +# If you want Exim to support the "percent hack" for all your local domains, +# uncomment the following line. This is the feature by which mail addressed +# to x%y@z (where z is one of your local domains) is locally rerouted to +# x@y and sent on. Otherwise x%y is treated as an ordinary local part. + +# percent_hack_domains=* + +pid_file_path = /var/run/exim%s.pid + + +end + + + +###################################################################### +# TRANSPORTS CONFIGURATION # +###################################################################### +# ORDER DOES NOT MATTER # +# Only one appropriate transport is called for each delivery. # +###################################################################### + +# A transport is used only when referenced from a director or a router that +# successfully handles an address. + + +# This transport is used for delivering messages over SMTP connections. + +remote_smtp: + driver = smtp + + +# This transport is used for local delivery to user mailboxes. By default +# it will be run under the uid and gid of the local user, and requires +# the sticky bit to be set on the /var/mail directory. Some systems use +# the alternative approach of running mail deliveries under a particular +# group instead of using the sticky bit. The commented options below show +# how this can be done. + +local_delivery: + driver = appendfile + file = /var/mail/${local_part} + delivery_date_add + envelope_to_add + return_path_add + group = mail + mode = 0660 + + +# This transport is used for handling pipe addresses generated by alias +# or .forward files. It has a conventional name, since it is not actually +# mentioned elsewhere in this configuration file. (A different name *can* +# be specified via the "address_pipe_transport" option if you really want +# to.) If the pipe generates any standard output, it is returned to the sender +# of the message as a delivery error. Set return_fail_output instead if you +# want this to happen only when the pipe fails to complete normally. + +address_pipe: + driver = pipe + return_output + + +# This transport is used for handling file addresses generated by alias +# or .forward files. It has a conventional name, since it is not actually +# mentioned elsewhere in this configuration file. + +address_file: + driver = appendfile + delivery_date_add + envelope_to_add + return_path_add + + +# This transport is used for handling file addresses generated by alias +# or .forward files if the path ends in "/", which causes it to be treated +# as a directory name rather than a file name. Each message is then delivered +# to a unique file in the directory. If instead you want all such deliveries to +# be in the "maildir" format that is used by some other mail software, +# uncomment the final option below. If this is done, the directory specified +# in the .forward or alias file is the base maildir directory. +# +# Should you want to be able to specify either maildir or non-maildir +# directory-style deliveries, then you must set up yet another transport, +# called address_directory2. This is used if the path ends in "//" so should +# be the one used for maildir, as the double slash suggests another level +# of directory. In the absence of address_directory2, paths ending in // +# are passed to address_directory. + +address_directory: + driver = appendfile + delivery_date_add + envelope_to_add + return_path_add + no_from_hack + prefix = "" + suffix = "" +# maildir_format + + +# This transport is used for handling autoreplies generated by the filtering +# option of the forwardfile director. It has a conventional name, since it +# is not actually mentioned elsewhere in this configuration file. + +address_reply: + driver = autoreply + + +end + + + +###################################################################### +# DIRECTORS CONFIGURATION # +# Specifies how local addresses are handled # +###################################################################### +# ORDER DOES MATTER # +# A local address is passed to each in turn until it is accepted. # +###################################################################### + +# Local addresses are those with a domain that matches some item in the +# "local_domains" setting above, or those which are passed back from the +# routers because of a "self=local" setting (not used in this configuration). + + +# This director handles aliasing using a traditional /etc/aliases file. +# If any of your aliases expand to pipes or files, you will need to set +# up a user and a group for these deliveries to run under. You can do +# this by uncommenting the "user" option below (changing the user name +# as appropriate) and adding a "group" option if necessary. + +system_aliases: + driver = aliasfile + file = /etc/aliases + search_type = lsearch +# user = bin + + +# This director handles forwarding using traditional .forward files. +# If you want it also to allow mail filtering when a forward file +# starts with the string "# Exim filter", uncomment the "filter" option. +# The check_ancestor option means that if the forward file generates an +# address that is an ancestor of the current one, the current one gets +# passed on instead. This covers the case where A is aliased to B and B +# has a .forward file pointing to A. + +userforward: + driver = forwardfile + file = .forward + no_verify + check_ancestor +# filter + + +# This director matches local user mailboxes. + +localuser: + driver = localuser + transport = local_delivery + + +end + + + +###################################################################### +# ROUTERS CONFIGURATION # +# Specifies how remote addresses are handled # +###################################################################### +# ORDER DOES MATTER # +# A remote address is passed to each in turn until it is accepted. # +###################################################################### + +# Remote addresses are those with a domain that does not match any item +# in the "local_domains" setting above. + + +# This router routes to remote hosts over SMTP using a DNS lookup with +# default options. + +lookuphost: + driver = lookuphost + transport = remote_smtp + + +# This router routes to remote hosts over SMTP by explicit IP address, +# given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs +# require this facility, which is why it is enabled by default in Exim. +# If you want to lock it out, set forbid_domain_literals in the main +# configuration section above. + +literal: + driver = ipliteral + transport = remote_smtp + + +end + + + +###################################################################### +# RETRY CONFIGURATION # +###################################################################### + +# This single retry rule applies to all domains and all errors. It specifies +# retries every 15 minutes for 2 hours, then increasing retry intervals, +# starting at 2 hours and increasing each time by a factor of 1.5, up to 16 +# hours, then retries every 8 hours until 4 days have passed since the first +# failed delivery. + +# Domain Error Retries +# ------ ----- ------- + +* * F,2h,15m; G,16h,2h,1.5; F,4d,8h + +end + + + +###################################################################### +# REWRITE CONFIGURATION # +###################################################################### + +# There are no rewriting specifications in this default configuration file. + +# End of Exim configuration file |