diff options
Diffstat (limited to 'mail/exim-old/files/Makefile')
| -rw-r--r-- | mail/exim-old/files/Makefile | 422 |
1 files changed, 0 insertions, 422 deletions
diff --git a/mail/exim-old/files/Makefile b/mail/exim-old/files/Makefile deleted file mode 100644 index 07e6066e2acf..000000000000 --- a/mail/exim-old/files/Makefile +++ /dev/null @@ -1,422 +0,0 @@ -################################################## -# The Exim mail transport agent # -################################################## - -# This is the template for Exim's main build-time configuration file. It -# contains settings that are independent of any operating system. It should -# be edited and then saved to a file called Local/Makefile before first running -# the make command. - -# Blank lines and lines starting with # are ignored. It is also permitted to -# use the # character to add a comment to a setting, for example -# -# EXIM_GID=42 # the "mail" group -# -# Consequently, it is not possible to have the # character present in any -# setting, but I can't think of any cases where this would be wanted. - -# Things that depend on the operating system have default settings in files -# called OS/Makefile-<osname>. These can be overridden by creating files -# called Local/Makefile-<osname>. In particular, the location of the X11 -# libraries is something that is quite variable between different versions -# of the same operation system (and indeed there are different versions of -# X11 as well, of course). The four settings concerned here are X11, XINCLUDE, -# XLFLAGS (linking flags) and X11_LD_LIB (dynamic run-time library). - -# There are defaults in OS/Makefile-Default which are overridden for some -# operating systems in the OS/Makefile-<osname> file. If these are not right -# for you, put appropriate settings into a file called Local/Makefile-<osname>. -# In all cases "<osname>" stands for the name of your operating system - look -# at the names in the OS directory to see which names are recognized. - -# Another area of variability between systems is the type and location of the -# dbm library package. Exim has support for ndbm, gdbm, and Berkeley db. By -# default it assumes ndbm; this often works with gdbm or db, provided they -# are correctly installed, via their compatibility interfaces. However, Exim -# can also be configured to use the native calls for Berkeley db 1.85, and -# this is defaulted for some operating systems. There are some locking actions -# that can be varied by changing the configuration. The defaults are set in -# OS/Makefile-Default, and can be changed by putting things into an OS-specific -# Makefile, or indeed into the main Local/Makefile if Exim is being compiled -# for a single OS only. - -# See also the file doc/dbm.discuss.txt for discussion about different dbm -# libraries. -############################################################################### - - -# /bin/sh is normally used as the shell in which to run commands that are -# defined in the makefiles. This can be changed if necessary, but note that -# a Bourne-compatible shell is expected. - -# MAKE_SHELL=/bin/sh - - -# The following commands live in different places in some OS. The OS-specific -# files should normally point to the right place, but they can be overridden -# here if necessary. Perl is not necessary for running Exim, but there are -# some Perl utilities for processing log files. If you haven't got Perl, -# Exim will still build and run; you just won't be able to run those utilities. - -# CHOWN_COMMAND=/usr/bin/chown -# CHGRP_COMMAND=/usr/bin/chgrp -# MV_COMMAND=/bin/mv -# RM_COMMAND=/bin/rm -# PERL_COMMAND=/usr/bin/perl - - -# The following macro can be used to change the command for building a library -# of functions. By default the "ar" command is used, with options "cq". - -# AR=ar cq - - -# The binary directory: This variable defines where the exim binary will be -# installed by "make install" or "exim_install". It is also used internally -# by exim when it needs to re-invoke itself, either to send an error message, -# or to recover root privilege. Exim's utility binaries and scripts are also -# installed in this directory. There is no default for this variable built into -# the source files; it must be set in one of the local configuration files. - -BIN_DIRECTORY=XX_PREFIX_XX/sbin - - -# The info directory: This variable defines where the exim info file will be -# installed by "make install" or "exim_intall". - -INFO_DIRECTORY=XX_PREFIX_XX/info - - -# The compress command is used by the exicyclog script to compress old log -# files. Both the name of the command and the suffix that it adds to files -# need to be defined here. See also the EXICYCLOG_MAX configuration. - -COMPRESS_COMMAND=/usr/bin/gzip -COMPRESS_SUFFIX=gz - - -# The runtime configuration file: This variable defines where Exim's runtime -# configuration file is. There is no default built into the source files, so -# there must be a setting in one of the local configuration files. The -# location of all other runtime files and directories can be changed in the -# runtime configuration file. - -CONFIGURE_FILE=XX_PREFIX_XX/etc/exim/configure - - -# In some installations there may be multiple machines sharing file systems, -# where a different configuration file is required for Exim on the different -# machines. If CONFIGURE_FILE_USE_NODE is defined, then Exim will first look -# for a configuration file whose name is that defined by CONFIGURE_FILE, -# with the node name obtained by uname() tacked on the end, separated by a -# period (for example, /usr/exim/configure.host.in.some.domain. If this file -# does not exist, then the bare configuration file name is tried. - -# CONFIGURE_FILE_USE_NODE=yes - - -# In some esoteric configurations two different versions of Exim are run, -# with different setuid values, and different configuration files are required -# to handle the different cases. If CONFIGURE_FILE_USE_EUID is defined, then -# Exim will first look for a configuration file whose name is that defined -# by CONFIGURE_FILE, with the effective uid tacked on the end, separated by -# a period (for eximple, /usr/exim/configure.0). If this file does not exist, -# then the bare configuration file name is tried. In the case when both -# CONFIGURE_FILE_USE_EUID and CONFIGURE_FILE_USE_NODE are set, four files -# are tried: <name>.<euid>.<node>, <name>.<node>, <name>.<euid>, and <name>. - -# CONFIGURE_FILE_USE_EUID=yes - - -# The size of the delivery buffer: This specifies the size of buffer which is -# used when copying a message from the spool to a destination. The default -# value built into the source is 8192. - -# DELIVER_BUFFER_SIZE=8192 - - -# Included directors: These variables determine which individual director -# drivers are included in the Exim binary. There are no defaults; those that -# are wanted must be defined here by setting the appropriate variables to the -# value "yes". The actions of each director are described in a separate chapter -# in the manual. Including a director in the binary does not cause it to -# be used automatically. It has also to be specified in the runtime -# configuration file. - -DIRECTOR_ALIASFILE=yes -DIRECTOR_FORWARDFILE=yes -DIRECTOR_LOCALUSER=yes -DIRECTOR_SMARTUSER=yes - - -# The mode of the database directory: Exim creates a directory called "db" -# in its spool directory, to hold its databases of hints. This variable -# determines the mode of the created directory. The default value in the -# source is 0750. - -# DB_DIRECTORY_MODE=0750 - - -# Database file mode: The mode of files created in the "db" directory defaults -# to 0640 in the source, and can be changed here. - -# DB_MODE=0640 - - -# Database lock file mode: The mode of zero-length files created in the "db" -# directory to use for locking purposes defaults to 0640 in the source, and -# can be changed here. - -# DB_LOCKFILE_MODE=0640 - - -# Cycling log files: this variable specifies the maximum number of old -# log files that are kept by the exicyclog log-cycling script. - -EXICYCLOG_MAX=10 - - -# Running Exim not as root: A uid and gid for Exim can be specified here. These -# are compiled into the binary, but can be changed by settings in the runtime -# configuration file. If EXIM_UID is not defined, the default in the code is to -# run as root unless specified otherwise at run time. Specifying 0 at -# run time has the effect of unsetting the values build into the binary. - -# The settings here must be numeric; the run time file allows names to -# be used. When this uid and gid are set, the Exim binary still has to be -# setuid root if local deliveries are to be performed or a listener on port -# 25 is to be run, but it gives up its privilege when possible. There is a -# trade-off between security and efficiency, controlled by the runtime -# "security" setting, which controls how privilege is released (setuid vs -# seteuid). - -# EXIM_UID= -# EXIM_GID= - - -# Compiling the Exim monitor: If you want to compile the Exim monitor, -# a program that requires an X11 display, then EXIM_MONITOR should be -# set to the value "eximon.bin". Comment out this setting to disable -# compilation of the binary file that is run by the eximon script. The -# locations of various X11 directories for libraries and include files -# are defaulted in the OS/Makefile-Default file, and can be overridden -# in local OS-specific make files. - -EXIM_MONITOR=eximon.bin - - -# The maximum length of header line that Exim is prepared to process. There -# is a limit in order to catch rogue mailers out there that might connect to -# the SMTP port, start off a header line, and then just pump junk for ever -# at it. The default is 8192. - -# HEADER_MAXLENGTH=8192 - - -# The mode of the input directory: The input directory is where messages are -# kept while awaiting delivery. Exim creates it if necessary, using a mode -# which can be defined here (default 0750). - -# INPUT_DIRECTORY_MODE=0750 - - -# Exim log directory and files: Exim creates several log files inside a -# single log directory. You can define the directory and the form of the -# log file name here, by setting LOG_FILE_PATH to a path name containing one -# occurrence of %s. This will be replaced by one of the strings "main", -# "panic", "process" or "reject" to form the final file name. For example, -# some installations may want something like this: - -LOG_FILE_PATH=/var/log/exim_%slog - -# which results in files with names /var/log/exim_mainlog, etc. The directory -# in which the log files are placed must exist; Exim does not try to create -# it for itself. It is also your responsibility to ensure that Exim is capable -# of writing files using this path name. If you have defined EXIM_UID and -# EXIM_GID above, then that uid and gid must be able to create files in the -# directory you have specified. - -# You do not have to define the log file path here; an option in the runtime -# configuration file can also set it, and that overrides any setting here. -# However, it is recommended that you set it here if it is a fixed path, so -# that it is available right from the start of Exim's execution. Otherwise, -# errors detected early on, for example errors in the configuration file, -# cannot be logged. - -# If you do not set LOG_FILE_PATH here or in the runtime configuration, Exim -# creates a directory called "log" inside its spool directory (see -# SPOOL_DIRECTORY below) and uses that with filenames "mainlog", "paniclog", -# etc. Its mode defaults to 0750 but that can be changed here. - -# LOG_DIRECTORY_MODE=0750 - -# This value is used only when Exim creates the directory for itself. - -# The log files themselves are created as required, with a mode that defaults -# to 0640, but which can be changed here. - -# LOG_MODE=0640 - - -# Included file and database lookup methods. See the manual chapter entitled -# "File and database lookups" for discussion. DBM and lsearch (linear search) -# are included by default. LOOKUP_DNSDB does *not* refer to general mail -# routing using the DNS. It is for the specialist case of using the DNS as -# a general database facility (not common). For details of cdb files and the -# tools to build them, see http://www.pobox.com/~djb/cdb.html. - -LOOKUP_DBM=yes -LOOKUP_LSEARCH=yes - -# LOOKUP_CDB=yes -# LOOKUP_DNSDB=yes -# LOOKUP_LDAP=yes -# LOOKUP_NIS=yes -# LOOKUP_NISPLUS=yes - -# The TESTDB lookup is for performing tests on the handling of lookup -# results, and is not useful for general running. It should be included -# only when debugging the code of Exim. - -# LOOKUP_TESTDB=yes - - -# Per-message logs: While a message is in the process of being delivered, -# comments on its progress are written to a message log, for the benefit of -# human administrators. These logs are held in a directory called "msglog" -# in the spool directory. Its mode defaults to 0750, but can be changed here. -# The message log directory is also used for storing files that are used by -# transports for returning data to a message's sender (see the "return_output" -# option for transports). - -# MSGLOG_DIRECTORY_MODE=0750 - - -# Identifying the daemon: When an Exim daemon starts up, it writes its pid to -# a file so that it can easily be identified. The path of the file can be -# specified here. It must contain precisely one occurrence of "%s". When -# a daemon is run on the default SMTP port, this is replaced with the null -# string, but when it is run with some explicit port specified, "%s" is -# replaced with the port number preceded by a dot. If a daemon is run with -# only one of -bd and -q<time>, then that option is added on to the end of -# the file name, allowing sites that run two separate daemons to distinguish -# them. Some installations may want something like this - -# PID_FILE_PATH=/var/lock/exim%s.pid - -# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory -# (see SPOOL_DIRECTORY below) with the name "exim-daemon.pid" for the standard -# daemon, or "exim-daemon.<port>.pid" for a daemon listening on a non-standard -# port. If you run a daemon that does not have both the -bd and -q options, -# then whichever of the two options it does have is added to the file name, -# whether obtained from PID_FILE_PATH or by default. - -# If you set PID_FILE_PATH, then it is your responsibility to ensure that -# Exim is capable of writing to the relevant files. If you have defined -# EXIM_UID and EXIM_GID above, then that uid/gid combination must be able to -# create and write to the files. If the attempt to open the file fails, Exim -# just refrains from trying to write the data. - -# The pid file path does not have to be set here; it can be also be set by an -# option in the runtime configuration file, which takes precedence over any -# setting here. - - -# Included routers: These variables determine which individual router drivers -# are included in the Exim binary. There are no defaults; those that are -# wanted must be defined here by setting the appropriate variables to the value -# "yes". The actions of each router are described in a separate chapter -# in the manual. Including a router in the binary does not cause it to -# be used automatically. It has also to be specified in the runtime -# configuration file. Those routers that are *not* wanted must not be defined -# here at all - comment them out. - -ROUTER_DOMAINLIST=yes -ROUTER_IPLITERAL=yes -ROUTER_LOOKUPHOST=yes -ROUTER_QUERYPROGRAM=yes - -# This one is very special-purpose, so is not included by default. - -# ROUTER_IPLOOKUP=yes - - -# The spool directory: This directory is where all the data for messages in -# transit is kept. There is no default in the source, so its location must be -# defined in a local configuration file, or in the runtime configuration. It -# is recommended that you define it here if it is a fixed path, especially if -# you have not defined LOG_FILE_PATH. Log files are then written in a sub- -# directory of the spool directory, and it is helpful to have this defined -# right from the start of execution so that, for example, errors in reading -# the runtime configuration file can be logged. - -# Exim creates the spool directory if it does not exist, using the mode -# required for the sub-directory that it is trying to create at the time. If a -# non-root uid and gid have been defined for Exim (either in this configuration -# file, or by the runtime configuration options), then this directory and all -# sub-directories and their files will be created with their owners and groups -# set to Exim's uid and gid. - -# Many installations will want something like this: -SPOOL_DIRECTORY=/var/spool/exim - -# Others may prefer to keep all Exim things under one directory: -# SPOOL_DIRECTORY=/usr/exim/spool - - -# If Exim creates the spool directory, it is given this mode, defaulting in the -# source to 0750. - -# SPOOL_DIRECTORY_MODE=0750 - - -# The mode of files on the input spool which hold the contents of message can -# be changed here. The default is 0600. If you have defined a uid and gid for -# Exim and want information from the spool to be available to anyone who is a -# member of the Exim group, change the value to 0640. This is particularly -# relevant if you are going to run the Exim monitor. - -# SPOOL_MODE=0600 - - -# If STDERR_FILE is defined then the -df command line option causes Exim to -# redirect stderr to the named file. This is useful for catching debugging -# output when starting Exim via inetd. - -# STDERR_FILE= - - -# The appendfile transport can write messages as individual files in a number -# of formats. The code for two specialist formats, maildir and mailstore, -# is included only when requested by the following settings: - -# SUPPORT_MAILDIR=yes -# SUPPORT_MAILSTORE=yes - - -# Included transports: These variables determine which individual transport -# drivers are included in the Exim binary. There are no defaults; those that -# are wanted must be defined here by setting the appropriate variables to the -# value "yes". The actions of each transport are described in a separate chapter -# in the manual. Including a transport in the binary does not cause it to -# be used automatically. It has also to be specified in the runtime -# configuration file. - -TRANSPORT_APPENDFILE=yes -TRANSPORT_AUTOREPLY=yes -TRANSPORT_PIPE=yes -TRANSPORT_SMTP=yes - -# The Debug transport is special, and should be included only when low-level -# debugging is being performed. In conjunction with the "debug_transport" -# configuration option, it permits the subversion of all mail deliveries to -# a given file. - -# TRANSPORT_DEBUG= - - -# TCP wrappers: - -# USE_TCP_WRAPPERS=yes - -# End of EDITME |