1 files changed, 0 insertions, 172 deletions
diff --git a/mail/exim-devel/files/eximon.conf b/mail/exim-devel/files/eximon.conf
deleted file mode 100644
index 76a7043d101c..000000000000
--- a/mail/exim-devel/files/eximon.conf
+++ /dev/null
@@ -1,172 +0,0 @@
-##################################################
-#                The Exim Monitor                #
-##################################################
-
-# This is the template for the Exim monitor's main build-time configuration
-# file. It contains settings that are independent of any operating system. It
-# should be edited and then saved to a file called Local/eximon.conf before
-# running the make command to build the monitor, if any settings are required.
-# Local/eximon.conf can be empty if no changes are needed. The examples given
-# here (commented out) are the default settings.
-
-# Any settings made in the configuration file can be overridden at run time
-# by setting up an environment variable with the same name as any of these
-# options, but preceded by EXIMON_, for example, EXIMON_WINDOW_TITLE.
-
-
-##################################################################
-#      Set these variables as appropriate for your system        #
-##################################################################
-
-# The qualifying name for your domain. The only use made of this is for
-# testing that certain addresses are the same when displaying the
-# log tail, and for shortening sender addresses in the queue display.
-
-# QUALIFY_DOMAIN=
-
-# The default minimum width and height for the whole window are 103 and
-# 162 pixels respectively. This is enough to hold the left-most stripchart
-# and the quit button. The values can be changed here.
-
-MIN_HEIGHT=162
-MIN_WIDTH=103
-
-# The title for eximon's main display window. It is possible to have
-# host name of the machine you are running on substituted into the
-# title string. If you include the string ${fullhostname} then the
-# complete name is used. If you include ${hostname} then the full
-# host name will have the string contained in the DOMAIN variable
-# stripped from its right-hand end before being substituted. Any other
-# shell or environment variables may also be included.
-
-# If you use any substitutions, remember to ensure that the $ and {}
-# characters are escaped from the shell, e.g. by using single quotes.
-
-WINDOW_TITLE="${hostname} eximon"
-
-# The domain that you want to be stripped from the machine's full hostname
-# when forming the short host name for the eximon window title, as
-# described above.
-
-# DOMAIN=
-
-# Parameters for the rolling display of the tail of the exim log file.
-# The width and depth are measured in pixels; LOG_BUFFER specifies the
-# amount of store to set aside for holding the log tail, which is displayed
-# in a scrolling window. When this store is full, the earlier 50% of it
-# is discarded - this is much more efficient that throwing it away line
-# by line. The number given can be followed by the letter K to indicate
-# that the value is in kilobytes. A minimum value of 1K is enforced.
-
-LOG_DEPTH=300
-LOG_WIDTH=950
-LOG_BUFFER=20K
-
-# The font which is used in the log tail display. This is defined in
-# the normal X manner. It must be a "character cell" font, because this
-# is required by the text widget.
-
-# LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
-
-# Parameters for the display of message that are on the exim queue.
-# The width and depth are measured in pixels.
-
-QUEUE_DEPTH=200
-QUEUE_WIDTH=950
-
-# The font which is used in the queue display.
-
-# QUEUE_FONT=$LOG_FONT
-
-# When a message has more than one undelivered address, they are listed
-# one below the other. A limit can be placed on the number of addresses
-# displayed for any one message. If there are more, then "..." is used
-# to indicate this.
-
-QUEUE_MAX_ADDRESSES=10
-
-# The display of the contents of the queue is updated every QUEUE_INTERVAL
-# seconds by default (there is a button to request update).
-
-QUEUE_INTERVAL=300
-
-# The size of the popup text window that is used for looking at the
-# contents of messages, etc.
-
-# TEXT_DEPTH=200
-
-# The keystroke/mouse-operation that is used to pop up the menu in the
-# queue window is configurable. The default is Shift with the lefthand
-# mouse button. The name of an alternative can be specified in the standard
-# X way of naming these things. With the default configuration for the monitor,
-# individuals can override this by setting the EXIMON_MENU_EVENT environment
-# variable.
-
-MENU_EVENT=Shift<Btn1Down>
-
-# When the menu is used to perform an operation on a message, the output
-# from the exim command that is generated is displayed in a separate window
-# by default. Set this option to "no" if you don't want to see the output -
-# the result of the operation is normally visible in the log window in any
-# case. This does not apply to the output generated from attempting to
-# deliver a message. That is always shown.
-
-ACTION_OUTPUT=yes
-
-# When some action is taken on a message, such as freezing it, or changing
-# its recipients, the queue display is normally automatically updated. On
-# systems that have very large queues, this can take some time and be dis-
-# tracting. If this option is set to "no", the queue display is no longer
-# automatically updated after an action is applied to a message.
-
-ACTION_QUEUE_UPDATE=yes
-
-# When the menu item to display a message's body is invoked, the amount
-# of data is limited to BODY_MAX bytes. This limit is a safety precaution
-# to save the screen scrolling for ever on an enormous message.
-
-BODY_MAX=20000
-
-# The stripcharts are updated every STRIPCHART_INTERVAL seconds.
-
-STRIPCHART_INTERVAL=60
-
-# A stripchart showing the count of messages in the queue is always
-# displayed on the left of eximon's window. Its name is "queue" by
-# default, but can be changed by this variable.
-
-QUEUE_STRIPCHART_NAME=queue
-
-# The following variable may be set to the name of a disc partition. If
-# it is, a stripchart showing the percentage fullness of the partition
-# will be displayed as the second stripchart. This can be used to keep
-# a display of a mail spool partition on the screen.
-
-# SIZE_STRIPCHART=/var/mail
-
-# The name of the size stripchar will be the last component of SIZE_STRIPCHART
-# unless the following variable is set to override it.
-
-# SIZE_STRIPCHART_NAME=space
-
-# The following variable contains a specification of which stripcharts
-# you want eximon to display based on log entries. The string consists of
-# pairs of strings, delimited by slash characters. The first string in each
-# pair is a regular expression that matches some distinguishing feature in a
-# exim log entry.
-
-# Entries that match the expression will be counted and displayed in a
-# stripchart whose title is given by the second string. The string may
-# be continued over several input lines, provided that it is split
-# after a slash, and an additional slash (optionally preceded by white
-# space) is included at the start of the continuation line.
-
-# Stripcharts configured by the following parameter are displayed to the
-# right of the queue and size stripcharts, in the order defined here.
-
-LOG_STRIPCHARTS='/ <= /in/
-                 / => /out/
-                 / => .+ D=/local/
-                 / => .+ T=[^ ]*smtp/smtp/'
-
-# End of exim_monitor/EDITME