diff options
Diffstat (limited to 'lang/python27/files/Setup')
| -rw-r--r-- | lang/python27/files/Setup | 437 |
1 files changed, 0 insertions, 437 deletions
diff --git a/lang/python27/files/Setup b/lang/python27/files/Setup deleted file mode 100644 index 5b32c7319622..000000000000 --- a/lang/python27/files/Setup +++ /dev/null @@ -1,437 +0,0 @@ -# -*- makefile -*- -# The file Setup is used by the makesetup script to construct the files -# Makefile and config.c, from Makefile.pre and config.c.in, -# respectively. The file Setup itself is initially copied from -# Setup.in; once it exists it will not be overwritten, so you can edit -# Setup to your heart's content. Note that Makefile.pre is created -# from Makefile.pre.in by the toplevel configure script. - -# (VPATH notes: Setup and Makefile.pre are in the build directory, as -# are Makefile and config.c; the *.in files are in the source -# directory.) - -# Each line in this file describes one or more optional modules. -# Comment out lines to suppress modules. -# Lines have the following structure: -# -# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...] -# -# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files) -# <cpparg> is anything starting with -I, -D, -U or -C -# <library> is anything ending in .a or beginning with -l or -L -# <module> is anything else but should be a valid Python -# identifier (letters, digits, underscores, beginning with non-digit) -# -# (As the makesetup script changes, it may recognize some other -# arguments as well, e.g. *.so and *.sl as libraries. See the big -# case statement in the makesetup script.) -# -# Lines can also have the form -# -# <name> = <value> -# -# which defines a Make variable definition inserted into Makefile.in -# -# Finally, if a line contains just the word "*shared*" (without the -# quotes but with the stars), then the following modules will not be -# included in the config.c file, nor in the list of objects to be -# added to the library archive, and their linker options won't be -# added to the linker options, but rules to create their .o files and -# their shared libraries will still be added to the Makefile, and -# their names will be collected in the Make variable SHAREDMODS. This -# is used to build modules as shared libraries. (They can be -# installed using "make sharedinstall", which is implied by the -# toplevel "make install" target.) (For compatibility, -# *noconfig* has the same effect as *shared*.) -# -# In addition, *static* reverses this effect (negating a previous -# *shared* line). - -# NOTE: As a standard policy, as many modules as can be supported by a -# platform should be present. The distribution comes with all modules -# enabled that are supported by most platforms and don't require you -# to ftp sources from elsewhere. - - -# Some special rules to define PYTHONPATH. -# Edit the definitions below to indicate which options you are using. -# Don't add any whitespace or comments! - -# Directories where library files get installed. -# DESTLIB is for Python modules; MACHDESTLIB for shared libraries. -DESTLIB=$(LIBDEST) -MACHDESTLIB=$(BINLIBDEST) - -# NOTE: all the paths are now relative to the prefix that is computed -# at run time! - -# Standard path -- don't edit. -# No leading colon since this is the first entry. -# Empty since this is now just the runtime prefix. -DESTPATH= - -# Site specific path components -- should begin with : if non-empty -SITEPATH= - -# Standard path components for test modules -TESTPATH= - -# Path components for machine- or system-dependent modules and shared libraries -MACHDEPPATH=:plat-$(MACHDEP) - -COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(TKPATH) -PYTHONPATH=$(COREPYTHONPATH) - - -# The modules listed here can't be built as shared libraries for -# various reasons; therefore they are listed here instead of in the -# normal order. - -# Some modules that are normally always on: - -regex regexmodule.c regexpr.c # Regular expressions, GNU Emacs style -pcre pcremodule.c pypcre.c # Regular expressions, Perl style (for re.py) -posix posixmodule.c # posix (UNIX) system calls -signal signalmodule.c # signal(2) -_sre _sre.c # Fredrik Lundh's new regular expressions - -# The SGI specific GL module: - -GLHACK=-Dclear=__GLclear -#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11 - -# Pure module. Cannot be linked dynamically. -# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE -#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE -#PURE_INCLS=-I/usr/local/include -#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs -#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS) - -# Uncommenting the following line tells makesetup that all following -# modules are to be built as shared libraries (see above for more -# detail; also note that *static* reverses this effect): - -#*shared* - -# GNU readline. Unlike previous Python incarnations, GNU readline is -# now incorporated in an optional module, configured in the Setup file -# instead of by a configure script switch. You may have to insert a -# -L option pointing to the directory where libreadline.* lives, -# and you may have to change -ltermcap to -ltermlib or perhaps remove -# it, depending on your system -- see the GNU readline instructions. -# It's okay for this to be a shared library, too. - -readline readline.c -lmytinfo -lreadline -ltermcap - - -# Modules that should always be present (non UNIX dependent): - -array arraymodule.c # array objects -cmath cmathmodule.c # -lm # complex math library functions -math mathmodule.c -lm # math library functions, e.g. sin() -strop stropmodule.c # fast string operations implemented in C -struct structmodule.c # binary structure packing/unpacking -time timemodule.c # -lm # time operations and variables -operator operator.c # operator.add() and similar goodies -_codecs _codecsmodule.c # access to the builtin codecs and codec registry - -unicodedata unicodedata.c unicodedatabase.c - # static Unicode character database -ucnhash ucnhash.c # Unicode Character Name expansion hash table - -_locale _localemodule.c # access to ISO C locale support - - -# Modules with some UNIX dependencies -- on by default: -# (If you have a really backward UNIX, select and socket may not be -# supported...) - -fcntl fcntlmodule.c # fcntl(2) and ioctl(2) -pwd pwdmodule.c # pwd(3) -grp grpmodule.c # grp(3) -errno errnomodule.c # posix (UNIX) errno values -select selectmodule.c # select(2); not on ancient System V -_socket socketmodule.c # socket(2) - -# Memory-mapped files (also works on Win32). -# Some platforms require -lucb. -mmap mmapmodule.c # -lucb - -# Socket module compiled with SSL support; you must edit the SSL variable: -#SSL=/usr/local/ssl -#_socket socketmodule.c \ -# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \ -# -L$(SSL)/lib -lssl -lcrypto - -# The crypt module is now disabled by default because it breaks builds -# on many systems (where -lcrypt is needed), e.g. Linux (I believe). -crypt cryptmodule.c -lcrypt # crypt(3); needs -lcrypt on some systems - -*shared* - -# Some more UNIX dependent modules -- off by default, since these -# are not supported by all UNIX systems: - -nis nismodule.c #-lnsl # Sun yellow pages -- not everywhere -termios termios.c # Steen Lumholt's termios module -resource resource.c # Jeremy Hylton's rlimit interface - - -# Multimedia modules -- off by default. -# These don't work for 64-bit platforms!!! -# These represent audio samples or images as strings: - -audioop audioop.c # Operations on audio samples -imageop imageop.c # Operations on images -rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably) - - -# The md5 module implements the RSA Data Security, Inc. MD5 -# Message-Digest Algorithm, described in RFC 1321. The necessary files -# md5c.c and md5.h are included here. - -md5 md5module.c md5c.c - - -# The sha module implements the SHA checksum algorithm. -# (NIST's Secure Hash Algorithm.) -sha shamodule.c - - -# The mpz module interfaces to the GNU Multiple Precision library. -# You need to ftp the GNU MP library. -# The GMP variable must point to the GMP source directory. -# This was originally written and tested against GMP 1.2 and 1.3.2. -# It has been modified by Rob Hooft to work with 2.0.2 as well, but I -# haven't tested it recently. - -# A compatible MP library unencombered by the GPL also exists. It was -# posted to comp.sources.misc in volume 40 and is widely available from -# FTP archive sites. One URL for it is: -# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z - -#GMP=/ufs/guido/src/gmp -#mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a - - -# SGI IRIX specific modules -- off by default. - -# These module work on any SGI machine: - -# *** gl must be enabled higher up in this file *** -#fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager -#sgi sgimodule.c # sgi.nap() and a few more - -# This module requires the header file -# /usr/people/4Dgifts/iristools/include/izoom.h: -#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities - - -# These modules require the Multimedia Development Option (I think): - -#al almodule.c -laudio # Audio Library -#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library -#cl clmodule.c -lcl -lawareaudio # Compression Library -#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video - - -# The FORMS library, by Mark Overmars, implements user interface -# components such as dialogs and buttons using SGI's GL and FM -# libraries. You must ftp the FORMS library separately from -# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a. -# NOTE: if you want to be able to use FORMS and curses simultaneously -# (or both link them statically into the same binary), you must -# compile all of FORMS with the cc option "-Dclear=__GLclear". - -# The FORMS variable must point to the FORMS subdirectory of the forms -# toplevel directory: - -#FORMS=/ufs/guido/src/forms/FORMS -#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl - - -# SunOS specific modules -- off by default: - -#sunaudiodev sunaudiodev.c - - -# Linux specific modules -- off by default: - -#linuxaudiodev linuxaudiodev.c - - -# George Neville-Neil's timing module: - -timing timingmodule.c - - -# The _tkinter module. -# -# The TKPATH variable is always enabled, to save you the effort. -TKPATH=:lib-tk - -# The command for _tkinter is long and site specific. Please -# uncomment and/or edit those parts as indicated. If you don't have a -# specific extension (e.g. Tix or BLT), leave the corresponding line -# commented out. (Leave the trailing backslashes in! If you -# experience strange errors, you may want to join all uncommented -# lines and remove the backslashes -- the backslash interpretation is -# done by the shell's "read" command and it may not be implemented on -# every system. - -# *** Always uncomment this (leave the leading underscore in!): -# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \ -# *** Uncomment and edit to reflect where your Tcl/Tk headers are: -# -I/usr/local/include \ -# *** Uncomment and edit to reflect where your X11 header files are: -# -I/usr/X11R6/include \ -# *** Or uncomment this for Solaris: -# -I/usr/openwin/include \ -# *** Uncomment and edit for Tix extension only: -# -DWITH_TIX -ltix4.1.8.0 \ -# *** Uncomment and edit for BLT extension only: -# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \ -# *** Uncomment and edit for PIL (TkImaging) extension only: -# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \ -# *** Uncomment and edit for TOGL extension only: -# -DWITH_TOGL togl.c \ -# *** Uncomment and edit to reflect where your Tcl/Tk libraries are: -# -L/usr/local/lib \ -# *** Uncomment and edit to reflect your Tcl/Tk versions: -# -ltk8.0 -ltcl8.0 \ -# *** Uncomment and edit to reflect where your X11 libraries are: -# -L/usr/X11R6/lib \ -# *** Or uncomment this for Solaris: -# -L/usr/openwin/lib \ -# *** Uncomment these for TOGL extension only: -# -lGL -lGLU -lXext -lXmu \ -# *** Uncomment for AIX: -# -lld \ -# *** Always uncomment this; X11 libraries to link with: -# -lX11 - -# Lance Ellinghaus's modules: - -rotor rotormodule.c # enigma-inspired encryption -syslog syslogmodule.c # syslog daemon interface - - -# Curses support, requring the System V version of curses, often -# provided by the ncurses library. e.g. on Linux, link with -lncurses -# instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include -# -L/usr/5lib before -lcurses). - -_curses _cursesmodule.c -lmytinfo -lcurses -ltermcap - - - -# Tommy Burnette's 'new' module (creates new empty objects of certain kinds): - -new newmodule.c - - -# Generic (SunOS / SVR4) dynamic loading module. -# This is not needed for dynamic loading of Python modules -- -# it is a highly experimental and dangerous device for calling -# *arbitrary* C functions in *arbitrary* shared libraries: - -dl dlmodule.c - - -# Modules that provide persistent dictionary-like semantics. You will -# probably want to arrange for at least one of them to be available on -# your machine, though none are defined by default because of library -# dependencies. The Python module anydbm.py provides an -# implementation independent wrapper for these; dumbdbm.py provides -# similar functionality (but slower of course) implemented in Python. - -# The standard Unix dbm module: - -dbm dbmmodule.c # dbm(3) may require -lndbm or similar - -# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm: - -#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm - - -# Berkeley DB interface. -# -# This requires the Berkeley DB code, see -# ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz -# -# Edit the variables DB and DBPORT to point to the db top directory -# and the subdirectory of PORT where you built it. -# -# (See http://www.jenkon-dev.com/~rd/python/ for an interface to -# BSD DB 2.1.0.) - -# Note: If a db.h file is found by configure, bsddb will be enabled -# automatically via Setup.config.in - -#DB=/depot/sundry/src/berkeley-db/db.1.85 -#DBPORT=$(DB)/PORT/irix.5.3 -#bsddb bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a - - - -# David Wayne Williams' soundex module (obsolete -- this will disappear!) -#soundex soundex.c - -# Helper module for various ascii-encoders -binascii binascii.c - -# Fred Drake's interface to the Python parser -parser parsermodule.c - -# Digital Creations' cStringIO and cPickle -cStringIO cStringIO.c -cPickle cPickle.c - - -# Lee Busby's SIGFPE modules. -# The library to link fpectl with is platform specific. -# Choose *one* of the options below for fpectl: - -# For SGI IRIX (tested on 5.3): -#fpectl fpectlmodule.c -lfpe - -# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2): -# (Without the compiler you don't have -lsunmath.) -#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm - -# For other systems: see instructions in fpectlmodule.c. -fpectl fpectlmodule.c - -# Test module for fpectl. No extra libraries needed. -fpetest fpetestmodule.c - -# Andrew Kuchling's zlib module. -# This require zlib 1.1.3 (or later). -# See http://www.cdrom.com/pub/infozip/zlib/ -zlib zlibmodule.c -lz - -# Interface to the Expat XML parser -# -# Expat is written by James Clark and must be downloaded separately -# (see below). The pyexpat module was written by Paul Prescod after a -# prototype by Jack Jansen. -# -# The Expat dist includes Windows .lib and .dll files. Home page is at -# http://www.jclark.com/xml/expat.html, the current production release is -# always ftp://ftp.jclark.com/pub/xml/expat.zip. -# -# EXPAT_DIR, below, should point to the expat/ directory created by -# unpacking the Expat source distribution. -# -# Note: the expat build process doesn't yet build a libexpat.a; you can -# do this manually while we try convince the author to add it. To do so, -# cd to EXPAT_DIR, run "make" if you have not done so, then run: -# -# ar cr libexpat.a xmltok/*.o xmlparse/*.o -# -#EXPAT_DIR=/usr/local/src/expat -#pyexpat pyexpat.c -I$(EXPAT_DIR)/xmlparse -L$(EXPAT_DIR) -lexpat - - -# Example -- included for reference only: -# xx xxmodule.c |