1 files changed, 0 insertions, 334 deletions
diff --git a/graphics/glx/Makefile b/graphics/glx/Makefile
deleted file mode 100644
index 3e9aac3c54ad..000000000000
--- a/graphics/glx/Makefile
+++ /dev/null
@@ -1,334 +0,0 @@
-# New ports collection makefile for:	GLX
-# Date created:         13 September 1999
-# Whom:                 Marc E E van Woerkom  <van.woerkom@netcologne.de>
-#
-# $FreeBSD$
-#
-#
-# Notes:
-#
-#  . You need at least XFree86 3.3.4 (or the glx patched 3.3.3.1)!
-#    This port is set up for 3.3.5
-#
-#  . Mesa-3.0 has to be uninstalled before this port builds!
-#    Why? Because we need to create a glx aware version.
-#
-#  . This stuff has been tested with
-#    - a Diamond Viper 330 (RIVA 128),
-#    - a Diamond Viper 550 (RIVA TNT),
-#    - and was reported to work with a Matrox G200 card
-#
-#  . Glx on n-vidia's site is outdated (we have XFree86-3.3.5 now
-#    so I rolled my own snapshot of the open project glx code.
-#    It is slightly outdated but will be updated soon.
-#
-#  . The current Mesa3 port for FreeBSD does not stop at the 'patch'
-#    target, but will instead try to build X11 immediatley if XFree86
-#    is not present.
-#    For this version (XFree86 3.3.5 needs no patches for glx yet) we
-#    ignore this wrong behaviour.
-#
-#  . We need tclsh for building - the choice for tclsh 8.0 is due to
-#    lack of time to include a proper selection scheme
-#
-#  . You can set CHIPSET_3D appropriately in /etc/make.conf if the
-#    question bugs you
-#
-
-PORTNAME=	glx
-PORTVERSION=	990802
-CATEGORIES=	graphics
-MASTER_SITES=	${MASTER_SITE_LOCAL}
-MASTER_SITE_SUBDIR=	3d/XF3.3.5
-DISTFILES=	${DISTNAME}.tar.bz2 \
-	 	riva-x-glx.faq.bz2 \
-		Mesa-3_0.diff.bz2
-
-MAINTAINER=	3d@freebsd.org
-
-# search for tclsh, if not present build it
-BUILD_DEPENDS=	tclsh8.0:${PORTSDIR}/lang/tcl80
-
-# These settings are here to make future updates to this port easier
-#PATCH_XFREE=	yes
-PATCH_MESA=	yes
-
-.if defined(PATCH_XFREE)
-BUILD_DEPENDS= 	/nonexistent:${PORTSDIR}/x11/XFree86:patch
-.endif
-.if defined(PATCH_MESA)
-BUILD_DEPENDS= 	/nonexistent:${PORTSDIR}/graphics/Mesa3:patch
-.endif
-
-USE_BZIP2=	yes
-
-EXTRACT_ONLY=	${DISTNAME}.tar.bz2
-
-DIST_SUBDIR=	glx
-
-WRKSRC=		${WRKDIR}/${DISTNAME}
-
-# I don't want to build XFree86 too soon, so don't use USE_X_PREFIX
-#USE_X_PREFIX=	yes
-PREFIX=		${X11BASE}
-
-XFCONFIG=	/etc/XF86Config
-
-XFREEVER=	3.3.5
-XFREEDIR=	${PORTSDIR}/x11/XFree86/work/xc
-
-MESAVER=	3.0
-MESADIR=	${PORTSDIR}/graphics/Mesa3/work/Mesa-3.0
-
-# As we ask for CHIPSET_3D if not set
-IS_INTERACTIVE=	YES
-
-# comment out the following line,
-# if you want to build with Imake (Linux/alpha favours that)
-USE_AUTOCONF=	yes
-GNU_CONFIGURE=	yes
-
-# we support nvidia RIVA 128, TNT.. and Matrox G200/400 cards
-.if defined(CHIPSET_3D)
-.if ${CHIPSET_3D} == RIVA
-CONFIGURE_ARGS=	--with-chipset=tnt
-.endif
-.if ${CHIPSET_3D} == MGA
-CONFIGURE_ARGS=	--with-chipset=mga
-.endif
-.endif
-
-CONFIGURE_ARGS+= --with-mesa=${MESADIR} \
-		--with-mesa-version=mesa30 \
-		# --with-mmx-asm --with-3dnow-asm
-
-USE_GMAKE=	yes
-
-.if !defined(GNU_CONFIGURE)
-USE_IMAKE= 	yes
-.endif
-
-.include <bsd.port.pre.mk>
-
-#
-#  before 'patch'
-#
-#  . apply some patches to the Mesa 3.0 distribution
-#
-pre-patch:
-.if defined(PATCH_XFREE)
-	@${ECHO} "=> Patching XFree86-${XFREEVER} for GLX .."
-	cd ${XFREEDIR}; \
-	${PATCH} -s -f <${FILESDIR}/XFree86-3_3_5.diff
-.endif
-.if defined(PATCH_MESA)
-	@${ECHO} "=> Checking Mesa-${MESAVER} installation .."
-	@if \
-	  pkg_info -e "Mesa-${MESAVER}"; \
-	then \
-	  ${ECHO} "Found Mesa-${MESAVER} - please deinstall"; \
-	  ${ECHO} "Aborting.."; \
-	  ${FALSE} ; \
-	fi
-.if exists(${MESADIR}/../.glxpatch_done)
-	@${ECHO} "=> Mesa-${MESAVER} seems already patched for GLX .."
-.else
-	@${ECHO} "=> Patching Mesa-${MESAVER} for GLX acceleration .."
-	@${ECHO} "(ignore the rejections, as they should happen in comments only)"
-	-cd ${MESADIR}; \
-	bzcat ${DISTDIR}/${DIST_SUBDIR}/Mesa-3_0.diff.bz2 | ${PATCH} -s -f
-	${TOUCH} ${MESADIR}/../.glxpatch_done
-.endif
-.endif
-
-#
-#  before 'configure'
-#
-#  . patch glx configure.in, libGL/Makefile.in,
-#    serverglx/Makefile.in (yes, this is an ugly hack)
-#
-pre-configure:
-.if !defined(CHIPSET_3D) || ${CHIPSET_3D} != RIVA && ${CHIPSET_3D} != MGA
-	@${ECHO}
-	@${ECHO} You must set the variable CHIPSET_3D to 'RIVA' if you use
-	@${ECHO} a nvidia RIVA 128, 128ZX, TNT, TNT2 .. based graphics card,
-	@${ECHO} or to 'MGA' if you use a Matrox G200/G400 graphics adapter
-	@${FALSE}
-.endif
-.if defined(GNU_CONFIGURE)
-	@${ECHO} "=> Adjusting ${WRKSRC}/configure.in .."
-	@cd ${WRKSRC}; \
-	${SED} -e 's;tclsh;tclsh8\.0;g' \
-	<configure.in >configure.in.new; \
-	${MV} configure.in.new configure.in
-	@${ECHO} "=> Adjusting ${WRKSRC}/libGL/Makefile.in .."
-	@cd ${WRKSRC}/libGL; \
-	${SED} -e 's;SOGLREV = 1\.0;SOGLREV = 1;' \
-	<Makefile.in >Makefile.in.new; \
-	${MV} Makefile.in.new Makefile.in
-	@${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Makefile.in .."
-	@cd ${WRKSRC}/servGL/serverglx; \
-	${SED} -e 's;tclsh;tclsh8\.0;g' \
-	<Makefile.in >Makefile.in.new; \
-	${MV} Makefile.in.new Makefile.in
-.endif
-
-#
-#  after 'configure'
-#
-#  . only for the old IMAKE style configuration
-#
-post-configure:
-.if !defined(GNU_CONFIGURE)
-	@${ECHO} "Using IMAKE"
-	@${ECHO} "=> Adjusting ${WRKSRC}/Config .."
-	@cd ${WRKSRC}; \
-	${SED} -e 's;XSERVTOP = .*;XSERVTOP = ${XFREEDIR};' \
-	       -e 's;MESATOP = .*;MESATOP = ${MESADIR};' \
-	<Config.in >Config;
-	@${ECHO} "=> Adjusting ${WRKSRC}/libGL/Imakefile .."
-	@cd ${WRKSRC}/libGL; \
-	${SED} -e 's;tclsh;tclsh8\.0;' <Imakefile >Imakefile.new; \
-	${MV} Imakefile.new Imakefile
-	@${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Imakefile .."
-	@cd ${WRKSRC}/servGL/serverglx; \
-	${SED} -e 's;tclsh;tclsh8\.0;' <Imakefile >Imakefile.new; \
-	${MV} Imakefile.new Imakefile
-.endif
-
-#
-#  before 'build':
-#
-#  . build a glx aware Mesa lib
-#  . create makefiles (old IMAKE style configuration)
-#
-pre-build:
-.if defined(PATCH_XFREE)
-	@${ECHO} "=> Building and installing XFree86-${XFREEVER} with GLX support .."
-	cd ${XFREEDIR}/../..; \
-	${MAKE} all install
-.endif
-.if defined(PATCH_MESA)
-	@${ECHO} "=> Building and installing Mesa-${MESAVER} with GLX support .."
-	cd ${MESADIR}/../..; \
-	${MAKE} all install
-.endif
-.if !defined(GNU_CONFIGURE)
-	@${ECHO} "=> Creating makefiles .."
-	cd ${WRKSRC}; \
-	${XMKMF}; \
-	${MAKE} Makefile; \
-	${MAKE} Makefiles
-.endif
-
-#
-#  before 'install':
-#
-#  . check for proper installed XFree86 version (3.3.4 or higher)
-#  . check for glx installation (please deinstall)
-#  . check for Mesa 3.0 installtion (please deinstall)
-#
-pre-install:
-	@${ECHO} "=> Checking XFree86 installation .."
-	@if \
-	  pkg_info -e "XFree86-3.3.4"; \
-	then \
-	  ${ECHO} "Found XFree86 3.3.4 - this port should still work"; \
-	elif \
-	  pkg_info -e "XFree86-3.3.5"; \
-	then \
-	  ${ECHO} "OK, found XFree86 3.3.5 - this port should work"; \
-	elif \
-	  pkg_info -e "XFree86-3.3.6"; \
-	then \
-	  ${ECHO} "Found XFree86 3.3.6 - this port should work"; \
-	elif \
-	  pkg_info -e "XFree86-3.3.3.1"; \
-	then \
-	  ${ECHO} ""; \
-	  ${ECHO} "This port will work only if your XFree86 3.3.3.1 version"; \
-	  ${ECHO} "has been patched for use with glx!"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "Visit 'http://people.FreeBSD.org/~3d' for more information"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "(We continue with fingers crossed)"; \
-	  ${ECHO} ""; \
-	else \
-	  ${ECHO} ""; \
-	  ${ECHO} "This port depends on having a proper version of XFree86"; \
-	  ${ECHO} "installed - preferably ${XFREEVER}!"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "Visit 'http://people.FreeBSD.org/~3d' for more information"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "Aborting.."; \
-	  ${FALSE} ; \
-	fi
-
-#
-#  after 'install':
-#
-#  . install some docs
-#  . move old Mesa lib away (old IMAKE style configuration)
-#  . check XFree86 configuration file for colordepth (RIVA only)
-#  . check XFree86 configuration file for glx module
-#  . give some hints
-#
-post-install:
-.if !defined(NOPORTDOCS)
-	@${ECHO} "=> Installing documentation .."
-	${MKDIR} ${PREFIX}/share/doc/riva-glx
-	${INSTALL_MAN} ${DISTDIR}/${DIST_SUBDIR}/riva-x-glx.faq.bz2 ${PREFIX}/share/doc/riva-glx
-	${INSTALL_MAN} ${WRKSRC}/README ${PREFIX}/share/doc/riva-glx
-	${INSTALL_MAN} ${WRKSRC}/tested.html ${PREFIX}/share/doc/riva-glx
-
-.endif
-.if !defined(GNU_CONFIGURE)
-	@${ECHO} "=> Adjusting links .."
-	-${MV} ${X11BASE}/lib/libMesaGL.a ${X11BASE}/lib/libMesaGL.a.old
-	-${MV} ${X11BASE}/lib/libMesaGL.so.14 ${X11BASE}/lib/libMesaGL.so.14.old
-	-${LN} -s ${X11BASE}/lib/libGL.a ${X11BASE}/lib/libMesaGL.a
-	-${LN} -s ${X11BASE}/lib/libGL.so.1 ${X11BASE}/lib/libMesaGL.so.14
-.endif
-.if !defined(CHIPSET_3D) || ${CHIPSET_3D} == RIVA
-	@${ECHO} "=> Checking for \"DefaultColorDepth\" in ${XFCONFIG} .."
-	@${ECHO} ""
-	@if \
-	  ${GREP} '^ *DefaultColorDepth *1[56] *$$' ${XFCONFIG}; \
-	then \
-	  ${ECHO} ""; \
-	  ${ECHO} "Found something."; \
-	else \
-	  ${ECHO} "Nope, nothing found - please use"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "    DefaultColorDepth 16"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "or"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "    DefaultColorDepth 15"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "in your ${XFCONFIG} file with your RIVA card!"; \
-	fi
-.endif
-	@${ECHO} "=> Checking for Section \"Module\" in ${XFCONFIG} .."
-	@${ECHO} ""
-	@if \
-	  ${GREP} -A2 '^ *Section *"Module" *$$' ${XFCONFIG} | \
-	  ${GREP} -B1 -A1 '^ *Load *"glx\.so" *$$' | \
-	  ${GREP} -B2 '^ *EndSection *$$' | \
-	  ${GREP} -A2 '^ *Section *"Module" *$$'; \
-	then \
-	  ${ECHO} ""; \
-	  ${ECHO} "Looks OK to me."; \
-	else \
-	  ${ECHO} "Nope, not found - please add"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "  Section \"Module\""; \
-	  ${ECHO} "  Load \"glx.so\""; \
-	  ${ECHO} "  EndSection"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "to the end of your ${XFCONFIG} file!"; \
-	fi
-	@${ECHO} "=> Giving last advice .."
-	@${CAT} ${PKGDIR}/MESSAGE
-
-.include <bsd.port.post.mk>