foo2zjs is an open source printer driver for printers that use the Zenographics

ZjStream wire protocol for their print data, such as the Minolta/QMS magicolor
2300 DL or Konica Minolta magicolor 2430 DL. These printers are often
erroneously referred to as winprinters or GDI printers.

However, Microsoft GDI only mandates the API between an application and the
printer driver, not the protocol on the wire between the printer driver and the
printer. In fact, ZjStream printers are raster printers which happen to use a
very efficient wire protocol which was developed by Zenographics and licensed
by most major printer manufacturers for at least some of their product lines.

ZjStream is just one of many wire protocols that are in use today, such as
Postscript, PCL, Epson, etc.

WWW:	http://foo2zjs.rkkda.com/

PR:		ports/94592
Submitted by:	Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>

7 files changed, 193 insertions, 0 deletions

diff --git a/print/Makefile b/print/Makefile
index 29d8ca809573..673db7d1779a 100644
--- a/print/Makefile
+++ b/print/Makefile
@@ -71,6 +71,7 @@
     SUBDIR += flpsed
     SUBDIR += font2svg
     SUBDIR += fontforge
+    SUBDIR += foo2zjs
     SUBDIR += foomatic-db
     SUBDIR += foomatic-db-engine
     SUBDIR += foomatic-db-hpijs
diff --git a/print/foo2zjs/Makefile b/print/foo2zjs/Makefile
new file mode 100644
index 000000000000..4ee45c781d54
--- /dev/null
+++ b/print/foo2zjs/Makefile
@@ -0,0 +1,43 @@
+# New ports collection makefile for:	foo2zjs
+# Date created:		2006-03-17
+# Whom:			Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	foo2zjs
+PORTVERSION=	20060504
+CATEGORIES=	print
+MASTER_SITES=	http://foo2zjs.rkkda.com/
+DISTNAME=	${PORTNAME}
+
+MAINTAINER=	acardenas@bsd.org.pe
+COMMENT=	Driver for printers that use the ZjStream wire protocol
+
+LIB_DEPENDS=	cups.2:${PORTSDIR}/print/cups-base
+RUN_DEPENDS=	${LOCALBASE}/share/foomatic/db/oldprinterids:${PORTSDIR}/print/foomatic-db \
+		foomatic-rip:${PORTSDIR}/print/foomatic-filters
+
+USE_GHOSTSCRIPT=	yes
+USE_GMAKE=	yes
+SUB_FILES=	pkg-message
+
+MAN1=	foo2hp.1 foo2oak-wrapper.1 foo2zjs-wrapper.1 oakdecode.1 foo2hp2600-wrapper.1 foo2oak.1 foo2zjs.1 zjsdecode.1
+
+post-patch:
+	@${REINPLACE_CMD} -e 's|^CFLAGS|CFLAGS?|g' -e 's|^PREFIX|PREFIX?|g' ${WRKSRC}/icc2ps/Makefile
+
+post-install:
+	@cd ${WRKSRC} && \
+		${INSTALL_MAN} ${MAN1} ${PREFIX}/man/man1/
+
+.if !defined(NOPORTDOCS)
+	@${MKDIR} ${DOCSDIR}
+.for FILE in ChangeLog README manual.pdf
+	${INSTALL_DATA} ${WRKSRC}/${FILE} ${DOCSDIR}
+.endfor
+.endif
+
+	@${CAT} ${PKGMESSAGE}
+
+.include <bsd.port.mk>
diff --git a/print/foo2zjs/distinfo b/print/foo2zjs/distinfo
new file mode 100644
index 000000000000..f6afbbc37d6a
--- /dev/null
+++ b/print/foo2zjs/distinfo
@@ -0,0 +1,3 @@
+MD5 (foo2zjs.tar.gz) = c44f2de01457308cca690b2e5e9dfbc7
+SHA256 (foo2zjs.tar.gz) = f517886d5b1062ac360feff856fd6eac9fa52b2a2278e92f235056541a156a74
+SIZE (foo2zjs.tar.gz) = 2127249
diff --git a/print/foo2zjs/files/patch-Makefile b/print/foo2zjs/files/patch-Makefile
new file mode 100644
index 000000000000..eb22fede0ff4
--- /dev/null
+++ b/print/foo2zjs/files/patch-Makefile
@@ -0,0 +1,68 @@
+--- Makefile.orig	Mon May  1 22:35:49 2006
++++ Makefile	Sat May  6 21:35:57 2006
+@@ -6,8 +6,7 @@
+ VERSION=0.0
+ 
+ # Installation prefix...
+-PREFIX=/usr/local
+-PREFIX=/usr
++PREFIX?=
+ 
+ # Pathnames for this package...
+ BIN=$(PREFIX)/bin
+@@ -18,7 +17,7 @@
+ DOCDIR=$(PREFIX)/share/doc/foo2zjs/
+ 
+ # Pathnames for referenced packages...
+-FOODB=/usr/share/foomatic/db/source
++FOODB=$(PREFIX)/share/foomatic/db/source
+ 
+ # User ID's
+ LPuid=-olp
+@@ -155,8 +154,8 @@
+ endif
+ 
+ # Compiler flags
+-CFLAGS +=	-O2 -Wall
+-
++CFLAGS?=
++CC?=
+ #
+ # Rules to create test documents
+ #
+@@ -277,7 +276,7 @@
+ # Installation rules
+ #
+ install: all install-test install-prog install-icc2ps install-extra \
+-	    install-crd install-foo install-ppd install-man install-doc
++	    install-crd install-ppd
+ 	#
+ 	# If you use CUPS, then restart the spooler:
+ 	#	make cups
+@@ -335,8 +334,10 @@
+ 	#
+ 	# Install current database files
+ 	#
++	mkdir -p $(FOODB)
+ 	@if [ -d $(FOODB) ]; then \
+ 	    for dir in driver printer opt; do \
++                install -d $(FOODB)/$$dir/; \
+ 		echo install -m 644 foomatic-db/$$dir/*.xml $(FOODB)/$$dir/; \
+ 		install -c -m 644 foomatic-db/$$dir/*.xml $(FOODB)/$$dir/; \
+ 	    done \
+@@ -421,12 +422,13 @@
+ 	    fi; \
+ 	done
+ 
+-MODEL=/usr/share/cups/model
+-LOCALMODEL=/usr/local/share/cups/model
++MODEL=$(PREFIX)/share/cups/model
++LOCALMODEL=$(PREFIX)/share/cups/model
+ install-ppd:
+ 	#
+ 	# Install PPD files for CUPS
+ 	#
++	mkdir -p $(MODEL)
+ 	if [ -d $(MODEL) ]; then \
+ 	    cd PPD; \
+ 	    for ppd in *.ppd; do \
diff --git a/print/foo2zjs/files/pkg-message.in b/print/foo2zjs/files/pkg-message.in
new file mode 100644
index 000000000000..0fc230a844b5
--- /dev/null
+++ b/print/foo2zjs/files/pkg-message.in
@@ -0,0 +1,7 @@
+###############################################################################################
+
+1) Please read the detailed installation instructions in the file:
+
+   * %%DOCSDIR%%/INSTALL
+
+###############################################################################################
diff --git a/print/foo2zjs/pkg-descr b/print/foo2zjs/pkg-descr
new file mode 100644
index 000000000000..4c7c04da8afd
--- /dev/null
+++ b/print/foo2zjs/pkg-descr
@@ -0,0 +1,15 @@
+foo2zjs is an open source printer driver for printers that use the Zenographics
+ZjStream wire protocol for their print data, such as the Minolta/QMS magicolor
+2300 DL or Konica Minolta magicolor 2430 DL. These printers are often
+erroneously referred to as winprinters or GDI printers.
+
+However, Microsoft GDI only mandates the API between an application and the
+printer driver, not the protocol on the wire between the printer driver and the
+printer. In fact, ZjStream printers are raster printers which happen to use a
+very efficient wire protocol which was developed by Zenographics and licensed
+by most major printer manufacturers for at least some of their product lines.
+
+ZjStream is just one of many wire protocols that are in use today, such as
+Postscript, PCL, Epson, etc.
+
+WWW:	http://foo2zjs.rkkda.com/
diff --git a/print/foo2zjs/pkg-plist b/print/foo2zjs/pkg-plist
new file mode 100644
index 000000000000..2915da3543ff
--- /dev/null
+++ b/print/foo2zjs/pkg-plist
@@ -0,0 +1,56 @@
+bin/arm2hpdl
+bin/foo2hp
+bin/foo2hp2600-wrapper
+bin/foo2oak-wrapper
+bin/foo2zjs
+bin/foo2zjs-icc2ps
+bin/foo2zjs-wrapper
+bin/okidecode
+bin/zjsdecode
+share/cups/model/Generic-OAKT_Printer.ppd.gz
+share/cups/model/Generic-ZjStream_Printer.ppd.gz
+share/cups/model/HP-Color_LaserJet_1500.ppd.gz
+share/cups/model/HP-Color_LaserJet_1600.ppd.gz
+share/cups/model/HP-Color_LaserJet_2600n.ppd.gz
+share/cups/model/HP-LaserJet_1000.ppd.gz
+share/cups/model/HP-LaserJet_1005.ppd.gz
+share/cups/model/HP-LaserJet_1018.ppd.gz
+share/cups/model/HP-LaserJet_1020.ppd.gz
+share/cups/model/Minolta-Color_PageWorks_Pro_L.ppd.gz
+share/cups/model/Minolta-magicolor_2200_DL.ppd.gz
+share/cups/model/Minolta-magicolor_2300_DL.ppd.gz
+share/cups/model/Minolta-magicolor_2430_DL.ppd.gz
+%%PORTDOCS%%%%DOCSDIR%%/ChangeLog
+%%PORTDOCS%%%%DOCSDIR%%/README
+%%PORTDOCS%%%%DOCSDIR%%/manual.pdf
+share/foo2hp/icm/hpclj2600n.icm
+share/foo2hp/icm/km2430_0.icm
+share/foo2hp/icm/km2430_1.icm
+share/foo2hp/icm/km2430_2.icm
+%%DATADIR%%/crd/2300w-1200@150-l250-kx,ucr100,0-per.crd
+%%DATADIR%%/crd/2300w-1200@150-l250-kx,ucr100,50-per.crd
+%%DATADIR%%/crd/2300w-1200@150-l250-kx,ucr100,75-per.crd
+%%DATADIR%%/crd/2300w-1200@150-l250-kx,ucr125,75-per.crd
+%%DATADIR%%/crd/kh.crd
+%%DATADIR%%/crd/kx.crd
+%%DATADIR%%/crd/prolog.ps
+%%DATADIR%%/crd/screen1200.ps
+%%DATADIR%%/crd/screen2400.ps
+%%DATADIR%%/firmware/sihp1000.dl
+%%DATADIR%%/firmware/sihp1005.dl
+%%DATADIR%%/firmware/sihp1018.dl
+%%DATADIR%%/firmware/sihp1020.dl
+%%DATADIR%%/gamma-lookup.ps
+%%DATADIR%%/gamma.ps
+%%DATADIR%%/icm/km2430_0.icm
+%%DATADIR%%/icm/km2430_1.icm
+%%DATADIR%%/icm/km2430_2.icm
+%%PORTDOCS%%@dirrm %%DOCSDIR%%
+@dirrm %%DATADIR%%/icm
+@dirrm %%DATADIR%%/firmware
+@dirrm %%DATADIR%%/crd
+@dirrm %%DATADIR%%
+@dirrm share/foo2oak/icm
+@dirrm share/foo2oak
+@dirrm share/foo2hp/icm
+@dirrm share/foo2hp