* Add support for ``-pthead''

* Add Alpha support

Obtained from:	Alpha bits taken from Hidetoshi Shimokawa's
                <simokawa@FreeBSD.ORG> work

1 files changed, 443 insertions, 0 deletions

diff --git a/lang/gcc-ooo/files/alpha-freebsd.h b/lang/gcc-ooo/files/alpha-freebsd.h
new file mode 100644
index 000000000000..60a1f07b94ba
--- /dev/null
+++ b/lang/gcc-ooo/files/alpha-freebsd.h
@@ -0,0 +1,443 @@
+/* Definitions of target machine for GNU compiler,
+   for Alpha FreeBSD systems.
+   Copyright (C) 1998 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU CC; see the file COPYING.  If not, write to
+the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+/* This is used on Alpha platforms that use the ELF format.
+   This was taken from the NetBSD configuration, and modified
+   for FreeBSD/alpha by Hidetoshi Shimokawa <simokawa@FreeBSD.ORG> */
+
+
+/* Get generic FreeBSD definitions.  */
+#include <freebsd.h>
+
+
+#undef OBJECT_FORMAT_COFF
+#undef EXTENDED_COFF
+#define OBJECT_FORMAT_ELF
+
+/* This is BSD, so it wants DBX format. */
+
+#define DBX_DEBUGGING_INFO
+
+/* This is the char to use for continuation (in case we need to turn
+   continuation back on). */
+
+#define DBX_CONTIN_CHAR '?'
+
+#undef ASM_FINAL_SPEC
+
+/* Names to predefine in the preprocessor for this target machine.
+   XXX FreeBSD, by convention, shouldn't do __alpha, but lots of applications
+   expect it because that's what OSF/1 does. */
+
+#undef TARGET_DEFAULT
+#define TARGET_DEFAULT (MASK_FP | MASK_FPREGS | MASK_GAS)
+
+#undef CPP_PREDEFINES
+#define CPP_PREDEFINES "\
+-D__alpha__ -D__alpha -Acpu(alpha) -Amachine(alpha) " \
+FBSD_CPP_PREDEFINES \
+SUB_CPP_PREDEFINES
+
+/* Make gcc agree with <machine/ansi.h> */
+
+#undef WCHAR_TYPE
+#define WCHAR_TYPE "int"
+
+#undef WCHAR_TYPE_SIZE
+#define WCHAR_TYPE_SIZE 32
+
+/* Output assembler code to FILE to increment profiler label # LABELNO
+   for profiling a function entry.  Under FreeBSD/Alpha, the assembler does
+   nothing special with -pg. */
+
+#undef FUNCTION_PROFILER
+#define FUNCTION_PROFILER(FILE, LABELNO)			\
+	fputs ("\tjsr $28,_mcount\n", (FILE))
+
+/* Show that we need a GP when profiling.  */
+#define TARGET_PROFILING_NEEDS_GP
+
+#undef HAS_INIT_SECTION
+
+/* Provide an ASM_SPEC appropriate for a FreeBSD/alpha target.  This differs
+   from the generic FreeBSD ASM_SPEC in that no special handling of PIC is
+   necessary on the Alpha. */
+
+#undef ASM_SPEC
+#define ASM_SPEC " %| %{mcpu=*:-m%*}"
+
+/* Output at beginning of assembler file.  */
+
+#undef ASM_FILE_START
+#define ASM_FILE_START(FILE)					\
+{								\
+  alpha_write_verstamp (FILE);					\
+  output_file_directive (FILE, main_input_filename);		\
+  fprintf (FILE, "\t.version\t\"01.01\"\n");			\
+  fprintf (FILE, "\t.set noat\n");				\
+}
+
+#define ASM_OUTPUT_SOURCE_LINE(STREAM, LINE)				\
+  alpha_output_lineno (STREAM, LINE)
+extern void alpha_output_lineno ();
+
+extern void output_file_directive ();
+
+/* Attach a special .ident directive to the end of the file to identify
+   the version of GCC which compiled this code.  The format of the
+   .ident string is patterned after the ones produced by native svr4
+   C compilers.  */
+
+#define IDENT_ASM_OP ".ident"
+
+#ifdef IDENTIFY_WITH_IDENT
+#define ASM_IDENTIFY_GCC(FILE) /* nothing */
+#define ASM_IDENTIFY_LANGUAGE(FILE)			\
+ fprintf(FILE, "\t%s \"GCC (%s) %s\"\n", IDENT_ASM_OP,	\
+	 lang_identify(), version_string)
+#else
+#define ASM_FILE_END(FILE)					\
+do {				 				\
+     fprintf ((FILE), "\t%s\t\"GCC: (GNU) %s\"\n",		\
+	      IDENT_ASM_OP, version_string);			\
+   } while (0)
+#endif
+
+/* Allow #sccs in preprocessor.  */
+
+#define SCCS_DIRECTIVE
+
+/* Output #ident as a .ident.  */
+
+#define ASM_OUTPUT_IDENT(FILE, NAME) \
+  fprintf (FILE, "\t%s\t\"%s\"\n", IDENT_ASM_OP, NAME);
+
+/* This is how to allocate empty space in some section.  The .zero
+   pseudo-op is used for this on most svr4 assemblers.  */
+
+#define SKIP_ASM_OP	".zero"
+
+#undef ASM_OUTPUT_SKIP
+#define ASM_OUTPUT_SKIP(FILE,SIZE) \
+  fprintf (FILE, "\t%s\t%u\n", SKIP_ASM_OP, (SIZE))
+
+/* Output the label which precedes a jumptable.  Note that for all svr4
+   systems where we actually generate jumptables (which is to say every
+   svr4 target except i386, where we use casesi instead) we put the jump-
+   tables into the .rodata section and since other stuff could have been
+   put into the .rodata section prior to any given jumptable, we have to
+   make sure that the location counter for the .rodata section gets pro-
+   perly re-aligned prior to the actual beginning of the jump table.  */
+
+#define ALIGN_ASM_OP ".align"
+
+#ifndef ASM_OUTPUT_BEFORE_CASE_LABEL
+#define ASM_OUTPUT_BEFORE_CASE_LABEL(FILE,PREFIX,NUM,TABLE) \
+  ASM_OUTPUT_ALIGN ((FILE), 2);
+#endif
+
+#undef ASM_OUTPUT_CASE_LABEL
+#define ASM_OUTPUT_CASE_LABEL(FILE,PREFIX,NUM,JUMPTABLE)		\
+  do {									\
+    ASM_OUTPUT_BEFORE_CASE_LABEL (FILE, PREFIX, NUM, JUMPTABLE)		\
+    ASM_OUTPUT_INTERNAL_LABEL (FILE, PREFIX, NUM);			\
+  } while (0)
+
+/* The standard SVR4 assembler seems to require that certain builtin
+   library routines (e.g. .udiv) be explicitly declared as .globl
+   in each assembly file where they are referenced.  */
+
+#define ASM_OUTPUT_EXTERNAL_LIBCALL(FILE, FUN)				\
+  ASM_GLOBALIZE_LABEL (FILE, XSTR (FUN, 0))
+
+/* This says how to output assembler code to declare an
+   uninitialized external linkage data object.  Under SVR4,
+   the linker seems to want the alignment of data objects
+   to depend on their types.  We do exactly that here.  */
+
+#define COMMON_ASM_OP	".comm"
+
+#undef ASM_OUTPUT_ALIGNED_COMMON
+#define ASM_OUTPUT_ALIGNED_COMMON(FILE, NAME, SIZE, ALIGN)		\
+do {									\
+  fprintf ((FILE), "\t%s\t", COMMON_ASM_OP);				\
+  assemble_name ((FILE), (NAME));					\
+  fprintf ((FILE), ",%u,%u\n", (SIZE), (ALIGN) / BITS_PER_UNIT);	\
+} while (0)
+
+/* This says how to output assembler code to declare an
+   uninitialized internal linkage data object.  Under SVR4,
+   the linker seems to want the alignment of data objects
+   to depend on their types.  We do exactly that here.  */
+
+#define LOCAL_ASM_OP	".local"
+
+#undef ASM_OUTPUT_ALIGNED_LOCAL
+#define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGN)		\
+do {									\
+  fprintf ((FILE), "\t%s\t", LOCAL_ASM_OP);				\
+  assemble_name ((FILE), (NAME));					\
+  fprintf ((FILE), "\n");						\
+  ASM_OUTPUT_ALIGNED_COMMON (FILE, NAME, SIZE, ALIGN);			\
+} while (0)
+
+/* This is the pseudo-op used to generate a 64-bit word of data with a
+   specific value in some section.  */
+
+#define INT_ASM_OP		".quad"
+
+/* This is the pseudo-op used to generate a contiguous sequence of byte
+   values from a double-quoted string WITHOUT HAVING A TERMINATING NUL
+   AUTOMATICALLY APPENDED.  This is the same for most svr4 assemblers.  */
+
+#undef ASCII_DATA_ASM_OP
+#define ASCII_DATA_ASM_OP	".ascii"
+
+/* Support const sections and the ctors and dtors sections for g++.
+   Note that there appears to be two different ways to support const
+   sections at the moment.  You can either #define the symbol
+   READONLY_DATA_SECTION (giving it some code which switches to the
+   readonly data section) or else you can #define the symbols
+   EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS, SELECT_SECTION, and
+   SELECT_RTX_SECTION.  We do both here just to be on the safe side.  */
+
+#define USE_CONST_SECTION	1
+
+#define CONST_SECTION_ASM_OP	".section\t.rodata"
+
+/* Define the pseudo-ops used to switch to the .ctors and .dtors sections.
+
+   Note that we want to give these sections the SHF_WRITE attribute
+   because these sections will actually contain data (i.e. tables of
+   addresses of functions in the current root executable or shared library
+   file) and, in the case of a shared library, the relocatable addresses
+   will have to be properly resolved/relocated (and then written into) by
+   the dynamic linker when it actually attaches the given shared library
+   to the executing process.  (Note that on SVR4, you may wish to use the
+   `-z text' option to the ELF linker, when building a shared library, as
+   an additional check that you are doing everything right.  But if you do
+   use the `-z text' option when building a shared library, you will get
+   errors unless the .ctors and .dtors sections are marked as writable
+   via the SHF_WRITE attribute.)  */
+
+#define CTORS_SECTION_ASM_OP	".section\t.ctors,\"aw\""
+#define DTORS_SECTION_ASM_OP	".section\t.dtors,\"aw\""
+
+/* On svr4, we *do* have support for the .init and .fini sections, and we
+   can put stuff in there to be executed before and after `main'.  We let
+   crtstuff.c and other files know this by defining the following symbols.
+   The definitions say how to change sections to the .init and .fini
+   sections.  This is the same for all known svr4 assemblers.  */
+
+#define INIT_SECTION_ASM_OP	".section\t.init"
+#define FINI_SECTION_ASM_OP	".section\t.fini"
+
+/* A default list of other sections which we might be "in" at any given
+   time.  For targets that use additional sections (e.g. .tdesc) you
+   should override this definition in the target-specific file which
+   includes this file.  */
+
+#undef EXTRA_SECTIONS
+#define EXTRA_SECTIONS in_const, in_ctors, in_dtors
+
+/* A default list of extra section function definitions.  For targets
+   that use additional sections (e.g. .tdesc) you should override this
+   definition in the target-specific file which includes this file.  */
+
+#undef EXTRA_SECTION_FUNCTIONS
+#define EXTRA_SECTION_FUNCTIONS						\
+  CONST_SECTION_FUNCTION						\
+  CTORS_SECTION_FUNCTION						\
+  DTORS_SECTION_FUNCTION
+
+#undef READONLY_DATA_SECTION
+#define READONLY_DATA_SECTION() const_section ()
+
+extern void text_section ();
+
+#define CONST_SECTION_FUNCTION						\
+void									\
+const_section ()							\
+{									\
+  if (!USE_CONST_SECTION)						\
+    text_section();							\
+  else if (in_section != in_const)					\
+    {									\
+      fprintf (asm_out_file, "%s\n", CONST_SECTION_ASM_OP);		\
+      in_section = in_const;						\
+    }									\
+}
+
+#define CTORS_SECTION_FUNCTION						\
+void									\
+ctors_section ()							\
+{									\
+  if (in_section != in_ctors)						\
+    {									\
+      fprintf (asm_out_file, "%s\n", CTORS_SECTION_ASM_OP);		\
+      in_section = in_ctors;						\
+    }									\
+}
+
+#define DTORS_SECTION_FUNCTION						\
+void									\
+dtors_section ()							\
+{									\
+  if (in_section != in_dtors)						\
+    {									\
+      fprintf (asm_out_file, "%s\n", DTORS_SECTION_ASM_OP);		\
+      in_section = in_dtors;						\
+    }									\
+}
+
+/* Switch into a generic section.
+   This is currently only used to support section attributes.
+
+   We make the section read-only and executable for a function decl,
+   read-only for a const data decl, and writable for a non-const data decl.  */
+#define ASM_OUTPUT_SECTION_NAME(FILE, DECL, NAME, RELOC) \
+  fprintf (FILE, ".section\t%s,\"%s\",@progbits\n", NAME, \
+	   (DECL) && TREE_CODE (DECL) == FUNCTION_DECL ? "ax" : \
+	   (DECL) && DECL_READONLY_SECTION (DECL, RELOC) ? "a" : "aw")
+
+
+/* A C statement (sans semicolon) to output an element in the table of
+   global constructors.  */
+#define ASM_OUTPUT_CONSTRUCTOR(FILE,NAME)				\
+  do {									\
+    ctors_section ();							\
+    fprintf (FILE, "\t%s\t ", INT_ASM_OP);				\
+    assemble_name (FILE, NAME);						\
+    fprintf (FILE, "\n");						\
+  } while (0)
+
+/* A C statement (sans semicolon) to output an element in the table of
+   global destructors.  */
+#define ASM_OUTPUT_DESTRUCTOR(FILE,NAME)       				\
+  do {									\
+    dtors_section ();                   				\
+    fprintf (FILE, "\t%s\t ", INT_ASM_OP);				\
+    assemble_name (FILE, NAME);              				\
+    fprintf (FILE, "\n");						\
+  } while (0)
+
+/* A C statement or statements to switch to the appropriate
+   section for output of DECL.  DECL is either a `VAR_DECL' node
+   or a constant of some sort.  RELOC indicates whether forming
+   the initial value of DECL requires link-time relocations.  */
+
+#define SELECT_SECTION(DECL,RELOC)					\
+{									\
+  if (TREE_CODE (DECL) == STRING_CST)					\
+    {									\
+      if (! flag_writable_strings)					\
+	const_section ();						\
+      else								\
+	data_section ();						\
+    }									\
+  else if (TREE_CODE (DECL) == VAR_DECL)				\
+    {									\
+      if ((flag_pic && RELOC)						\
+	  || !TREE_READONLY (DECL) || TREE_SIDE_EFFECTS (DECL)		\
+	  || !DECL_INITIAL (DECL)					\
+	  || (DECL_INITIAL (DECL) != error_mark_node			\
+	      && !TREE_CONSTANT (DECL_INITIAL (DECL))))			\
+	data_section ();						\
+      else								\
+	const_section ();						\
+    }									\
+  else									\
+    const_section ();							\
+}
+
+/* A C statement or statements to switch to the appropriate
+   section for output of RTX in mode MODE.  RTX is some kind
+   of constant in RTL.  The argument MODE is redundant except
+   in the case of a `const_int' rtx.  Currently, these always
+   go into the const section.  */
+
+#undef SELECT_RTX_SECTION
+#define SELECT_RTX_SECTION(MODE,RTX) const_section()
+
+/* Define the strings used for the special svr4 .type and .size directives.
+   These strings generally do not vary from one system running svr4 to
+   another, but if a given system (e.g. m88k running svr) needs to use
+   different pseudo-op names for these, they may be overridden in the
+   file which includes this one.  */
+
+#define TYPE_ASM_OP	".type"
+#define SIZE_ASM_OP	".size"
+
+/* This is how we tell the assembler that two symbols have the same value.  */
+
+#define ASM_OUTPUT_DEF(FILE,NAME1,NAME2) \
+  do { assemble_name(FILE, NAME1); 	 \
+       fputs(" = ", FILE);		 \
+       assemble_name(FILE, NAME2);	 \
+       fputc('\n', FILE); } while (0)
+
+/* A table of bytes codes used by the ASM_OUTPUT_ASCII and
+   ASM_OUTPUT_LIMITED_STRING macros.  Each byte in the table
+   corresponds to a particular byte value [0..255].  For any
+   given byte value, if the value in the corresponding table
+   position is zero, the given character can be output directly.
+   If the table value is 1, the byte must be output as a \ooo
+   octal escape.  If the tables value is anything else, then the
+   byte value should be output as a \ followed by the value
+   in the table.  Note that we can use standard UN*X escape
+   sequences for many control characters, but we don't use
+   \a to represent BEL because some svr4 assemblers (e.g. on
+   the i386) don't know about that.  Also, we don't use \v
+   since some versions of gas, such as 2.2 did not accept it.  */
+
+#define ESCAPES \
+"\1\1\1\1\1\1\1\1btn\1fr\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
+\0\0\"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\
+\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
+\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
+\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
+\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1"
+
+/* Some svr4 assemblers have a limit on the number of characters which
+   can appear in the operand of a .string directive.  If your assembler
+   has such a limitation, you should define STRING_LIMIT to reflect that
+   limit.  Note that at least some svr4 assemblers have a limit on the
+   actual number of bytes in the double-quoted string, and that they
+   count each character in an escape sequence as one byte.  Thus, an
+   escape sequence like \377 would count as four bytes.
+
+   If your target assembler doesn't support the .string directive, you
+   should define this to zero.
+*/
+
+#define STRING_LIMIT	((unsigned) 256)
+
+#define STRING_ASM_OP	".string"
+
+/*
+ * We always use gas here, so we don't worry about ECOFF assembler problems.
+ */
+#undef TARGET_GAS
+#define TARGET_GAS	(1)
+
+#undef PREFERRED_DEBUGGING_TYPE
+#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG