Remove expired hping-devel, missed in r454648

9 files changed, 0 insertions, 411 deletions

diff --git a/net/Makefile b/net/Makefile
index 2edbe8f6e2d2..493cf4bfff6b 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -235,7 +235,6 @@
     SUBDIR += hostapd
     SUBDIR += howl
     SUBDIR += hping
-    SUBDIR += hping-devel
     SUBDIR += hs-aws
     SUBDIR += hs-connection
     SUBDIR += hs-gsasl
diff --git a/net/hping-devel/Makefile b/net/hping-devel/Makefile
deleted file mode 100644
index 1746df0a4ba7..000000000000
--- a/net/hping-devel/Makefile
+++ /dev/null
@@ -1,57 +0,0 @@
-# $FreeBSD$
-
-PORTNAME=	hping
-PORTVERSION=	3.0.20051105
-PORTREVISION=	2
-CATEGORIES=	net security
-MASTER_SITES=	http://www.hping.org/ \
-		http://200ok.org/distfiles/hping/
-PKGNAMESUFFIX=	-devel
-DISTNAME=	hping3-20051105
-
-MAINTAINER=	ecu@200ok.org
-COMMENT=	Network auditing tool
-
-DEPRECATED=		Tcl/Tk 8.4 is no longer maintained, please use 8.5+
-EXPIRATION_DATE=	2017-11-20
-
-LIB_DEPENDS=	libtcl84.so:lang/tcl84
-
-CONFLICTS=	hping-[0-9]*
-
-BROKEN_aarch64=	fails to build: can not find the byte order for this architecture, fix bytesex.h
-
-GNU_CONFIGURE=	yes
-USES=		alias gmake
-
-PLIST_FILES=	sbin/hping lib/hping/hpingstdlib.htcl man/man8/hping.8.gz
-PORTDOCS=	AS-BACKDOOR HPING2-HOWTO.txt HPING2-IS-OPEN \
-		MORE-FUN-WITH-IPID SPOOFED_SCAN.txt APD.txt \
-		API.txt HPING3.txt
-
-PORTEXAMPLES=	README apd.htcl apd2.htcl ciscoios.htcl ciscoios0.htcl \
-		cloner.htcl igrp.htcl isn-spectrogram.htcl nat-noise.htcl \
-		passivets.htcl ping.htcl raw.htcl show-tcpseq.htcl \
-		showled.htcl
-
-.include <bsd.port.pre.mk>
-
-.if ${OPSYS} == FreeBSD && ${OSVERSION} >= 1100030
-EXTRA_PATCHES=	${FILESDIR}/extra-patch-sendip.c
-.endif
-
-do-install:
-	${INSTALL_PROGRAM} ${WRKSRC}/hping3 ${STAGEDIR}${PREFIX}/sbin/hping
-	${INSTALL_MAN} ${WRKSRC}/docs/hping3.8 ${STAGEDIR}${PREFIX}/man/man8/hping.8
-	${MKDIR} ${STAGEDIR}${PREFIX}/lib/hping
-	${INSTALL_DATA} ${WRKSRC}/lib/hpingstdlib.htcl ${STAGEDIR}${PREFIX}/lib/hping/
-	${MKDIR} ${STAGEDIR}${DOCSDIR} ${STAGEDIR}${EXAMPLESDIR}
-	${INSTALL_DATA} ${PORTDOCS:S|^|${WRKSRC}/docs/|} ${STAGEDIR}${DOCSDIR}
-.for i in ${PORTEXAMPLES}
-	${REINPLACE_CMD} -e \
-	's|hpingstdlib.htcl|${PREFIX}/lib/hping/hpingstdlib.htcl|' \
-		${WRKSRC}/lib/${i}
-.endfor
-	${INSTALL_DATA} ${PORTEXAMPLES:S|^|${WRKSRC}/lib/|} ${STAGEDIR}${EXAMPLESDIR}
-
-.include <bsd.port.post.mk>
diff --git a/net/hping-devel/distinfo b/net/hping-devel/distinfo
deleted file mode 100644
index e8679343fa1c..000000000000
--- a/net/hping-devel/distinfo
+++ /dev/null
@@ -1,2 +0,0 @@
-SHA256 (hping3-20051105.tar.gz) = f5a671a62a11dc8114fa98eade19542ed1c3aa3c832b0e572ca0eb1a5a4faee8
-SIZE (hping3-20051105.tar.gz) = 584001
diff --git a/net/hping-devel/files/extra-patch-sendip.c b/net/hping-devel/files/extra-patch-sendip.c
deleted file mode 100644
index 872861983e5a..000000000000
--- a/net/hping-devel/files/extra-patch-sendip.c
+++ /dev/null
@@ -1,33 +0,0 @@
---- sendip.c.orig	2003-08-01 21:28:07.000000000 +0800
-+++ sendip.c	2015-12-22 23:16:39.296072000 +0800
-@@ -48,12 +48,12 @@
- 	ip->ihl		= (IPHDR_SIZE + optlen + 3) >> 2;
- 	ip->tos		= ip_tos;
- 
--#if defined OSTYPE_FREEBSD || defined OSTYPE_NETBSD || defined OSTYPE_BSDI
--/* FreeBSD */
-+#if defined OSTYPE_NETBSD || defined OSTYPE_BSDI
- /* NetBSD */
- 	ip->tot_len	= packetsize;
- #else
- /* Linux */
-+/* FreeBSD */
- /* OpenBSD */
- 	ip->tot_len	= htons(packetsize);
- #endif
-@@ -73,13 +73,13 @@
- 			htons((unsigned short) src_id);
- 	}
- 
--#if defined OSTYPE_FREEBSD || defined OSTYPE_NETBSD | defined OSTYPE_BSDI
--/* FreeBSD */
-+#if defined OSTYPE_NETBSD | defined OSTYPE_BSDI
- /* NetBSD */
- 	ip->frag_off	|= more_fragments;
- 	ip->frag_off	|= fragoff >> 3;
- #else
- /* Linux */
-+/* FreeBSD */
- /* OpenBSD */
- 	ip->frag_off	|= htons(more_fragments);
- 	ip->frag_off	|= htons(fragoff >> 3); /* shift three flags bit */
diff --git a/net/hping-devel/files/patch-Makefile.in b/net/hping-devel/files/patch-Makefile.in
deleted file mode 100644
index fb85e5a541d1..000000000000
--- a/net/hping-devel/files/patch-Makefile.in
+++ /dev/null
@@ -1,39 +0,0 @@
---- Makefile.in.orig	Sat Apr 10 01:38:56 2004
-+++ Makefile.in	Mon Oct 31 10:48:24 2005
-@@ -6,10 +6,10 @@
- # $date: Sun Jul 25 17:56:15 MET DST 1999$ 
- # $rev: 3$ 
- 
--CC= gcc
-+CC?= gcc
- AR=/usr/bin/ar
- RANLIB=/usr/bin/ranlib
--CCOPT= -O2 -Wall @PCAP_INCLUDE@ @TCL_INC@ @USE_TCL@
-+CCOPT= -Wall @CFLAGS@ @PCAP_INCLUDE@ @TCL_INC@ @USE_TCL@
- DEBUG= -g
- #uncomment the following if you need libpcap based build under linux
- #(not raccomanded)
-@@ -50,20 +50,20 @@
- 	$(RANLIB) $@
- 
- hping3: byteorder.h $(OBJ)
--	$(CC) -o hping3 $(CCOPT) $(DEBUG) $(OBJ) -L/usr/local/lib $(PCAP) @SOLARISLIB@ @TCL_LIB@
-+	$(CC) -o hping3 $(CCOPT) $(OBJ) -L/usr/local/lib $(PCAP) @SOLARISLIB@ @TCL_LIB@
- 	@echo
- 	./hping3 -v
- 	@echo "use \`make strip' to strip hping3 binary"
- 	@echo "use \`make install' to install hping3"
- 
- hping3-static: byteorder.h $(OBJ)
--	$(CC) -static -o hping3-static $(CCOPT) $(DEBUG) $(OBJ) -L/usr/local/lib $(PCAP) @SOLARISLIB@ @TCL_LIB@ -ldl
-+	$(CC) -static -o hping3-static $(CCOPT) $(OBJ) -L/usr/local/lib $(PCAP) @SOLARISLIB@ @TCL_LIB@ -ldl
- 
- byteorder.h:
- 	./configure
- 
- .c.o:
--	$(CC) -c $(CCOPT) $(DEBUG) $(COMPILE_TIME) $<
-+	$(CC) -c $(CCOPT) $(COMPILE_TIME) $<
- 
- clean:
- 	rm -rf hping3 *.o libars.a
diff --git a/net/hping-devel/files/patch-bytesex.h b/net/hping-devel/files/patch-bytesex.h
deleted file mode 100644
index 6159fea08192..000000000000
--- a/net/hping-devel/files/patch-bytesex.h
+++ /dev/null
@@ -1,17 +0,0 @@
---- bytesex.h.orig	2003-07-28 17:00:55.000000000 +0800
-+++ bytesex.h	2015-12-22 22:30:11.367208000 +0800
-@@ -8,10 +8,14 @@
- #define ARS_BYTESEX_H
- 
- #if 	defined(__i386__) \
-+	|| defined (__amd64__) \
-+	|| defined(__ia64__) \
- 	|| defined(__alpha__) \
-+	|| defined(__arm__) \
- 	|| (defined(__mips__) && (defined(MIPSEL) || defined (__MIPSEL__)))
- #define BYTE_ORDER_LITTLE_ENDIAN
- #elif 	defined(__mc68000__) \
-+	|| (defined(__arm__) && (defined(ARMEB) || defined (__ARMEB__))) \
- 	|| defined (__sparc__) \
- 	|| defined (__sparc) \
- 	|| defined (__PPC__) \
diff --git a/net/hping-devel/files/patch-configure b/net/hping-devel/files/patch-configure
deleted file mode 100644
index fdc8d4fcdfad..000000000000
--- a/net/hping-devel/files/patch-configure
+++ /dev/null
@@ -1,10 +0,0 @@
---- configure.orig	Fri Jun  4 08:39:10 2004
-+++ configure	Mon Oct 31 10:49:39 2005
-@@ -143,6 +143,7 @@
- 	-e "s^@TCL_INC@^$TCL_INC^g" \
- 	-e "s^@TCL_VER@^$TCL_VER^g" \
- 	-e "s^@TCL_LIB@^$TCL_LIB^g" \
-+	-e "s^@CFLAGS@^$CFLAGS^g" \
- 	<Makefile.in > Makefile
- 
- #
diff --git a/net/hping-devel/files/patch-hping3.8 b/net/hping-devel/files/patch-hping3.8
deleted file mode 100644
index d4dd87cc16d2..000000000000
--- a/net/hping-devel/files/patch-hping3.8
+++ /dev/null
@@ -1,240 +0,0 @@
---- docs/hping3.8.orig	Mon Oct 31 11:23:58 2005
-+++ docs/hping3.8	Mon Oct 31 11:23:27 2005
-@@ -1,8 +1,8 @@
--.TH HPING2 8 "2001 Aug 14"
-+.TH hping 8 "2001 Aug 14"
- .SH NAME
--hping2 \- send (almost) arbitrary TCP/IP packets to network hosts
-+hping \- send (almost) arbitrary TCP/IP packets to network hosts
- .SH SYNOPSIS
--.B hping2
-+.B hping
- [
- .B \-hvnqVDzZ012WrfxykQbFSRPAUXYjJBuTG
- ] [
-@@ -116,11 +116,11 @@
- .br
- .ad
- .SH DESCRIPTION
--hping2 is a network tool able to send custom TCP/IP packets and to
--display target replies like ping program does with ICMP replies. hping2
-+hping is a network tool able to send custom TCP/IP packets and to
-+display target replies like ping program does with ICMP replies. hping
- handle fragmentation, arbitrary packets body and size and can be used in
- order to transfer files encapsulated under supported protocols. Using
--hping2 you are able to perform at least the following stuff:
-+hping you are able to perform at least the following stuff:
- 
-  - Test firewall rules
-  - Advanced port scanning
-@@ -136,7 +136,7 @@
-  - A lot of others.
- 
- .IR "It's also a good didactic tool to learn TCP/IP" .
--hping2 is developed and maintained by antirez@invece.org and is
-+hping is developed and maintained by antirez@invece.org and is
- licensed under GPL version 2. Development is open so you can send
- me patches, suggestion and affronts without inhibitions.
- .SH HPING SITE
-@@ -158,9 +158,9 @@
- .I -c --count count
- Stop after sending (and receiving)
- .I count
--response packets. After last packet was send hping2 wait COUNTREACHED_TIMEOUT
-+response packets. After last packet was send hping wait COUNTREACHED_TIMEOUT
- seconds target host replies. You are able to tune COUNTREACHED_TIMEOUT editing
--hping2.h
-+hping.h
- .TP
- .I -i --interval
- Wait
-@@ -171,10 +171,10 @@
- .I wait
- to X micro seconds.
- The default is to wait
--one second between each packet. Using hping2 to transfer files tune this
-+one second between each packet. Using hping to transfer files tune this
- option is really important in order to increase transfer rate. Even using
--hping2 to perform idle/spoofing scanning you should tune this option, see
--.B HPING2-HOWTO
-+hping to perform idle/spoofing scanning you should tune this option, see
-+.B hping-HOWTO
- for more information.
- .TP
- .I --fast
-@@ -195,13 +195,13 @@
- startup time and when finished.
- .TP
- .I -I --interface interface name
--By default on linux and BSD systems hping2 uses default routing interface.
-+By default on linux and BSD systems hping uses default routing interface.
- In other systems or when there is no default route
--hping2 uses the first non-loopback interface.
--However you are able to force hping2 to use the interface you need using
-+hping uses the first non-loopback interface.
-+However you are able to force hping to use the interface you need using
- this option. Note: you don't need to specify the whole name, for
- example -I et will match eth0 ethernet0 myet1 et cetera. If no interfaces
--match hping2 will try to use lo.
-+match hping will try to use lo.
- .TP
- .I -V --verbose
- Enable verbose output. TCP replies will be shown as follows:
-@@ -211,7 +211,7 @@
- .TP
- .I -D --debug
- Enable debug mode, it's useful when you experience some problem with
--hping2. When debug mode is enabled you will get more information about
-+hping. When debug mode is enabled you will get more information about
- .B interface detection, data link layer access, interface settings, options
- .B parsing, fragmentation, HCMP protocol
- and other stuff.
-@@ -223,30 +223,30 @@
- CTRL+Z once or twice.
- .TP
- .I -Z --unbind
--Unbind CTRL+Z so you will able to stop hping2.
-+Unbind CTRL+Z so you will able to stop hping.
- .TP
- .I --beep
- Beep for every matching received packet (but not for ICMP errors).
- .SH PROTOCOL SELECTION
--Default protocol is TCP, by default hping2 will send tcp headers to target
-+Default protocol is TCP, by default hping will send tcp headers to target
- host's port 0 with a winsize of 64 without any tcp flag on. Often this
- is the best way to do an 'hide ping', useful when target is behind
- a firewall that drop ICMP. Moreover a tcp null-flag to port 0 has a good
- probability of not being logged.
- .TP
- .I -0 --rawip
--RAW IP mode, in this mode hping2 will send IP header with data
-+RAW IP mode, in this mode hping will send IP header with data
- appended with --signature and/or --file, see also --ipproto that
- allows you to set the ip protocol field.
- .TP
- .I -1 --icmp
--ICMP mode, by default hping2 will send ICMP echo-request, you can set
-+ICMP mode, by default hping will send ICMP echo-request, you can set
- other ICMP type/code using
- .B --icmptype --icmpcode
- options.
- .TP
- .I -2 --udp
--UDP mode, by default hping2 will send udp to target host's port 0.
-+UDP mode, by default hping will send udp to target host's port 0.
- UDP header tunable options are the following:
- .B --baseport, --destport, --keep.
- .TP
-@@ -288,11 +288,11 @@
- shows interesting details.
- .TP
- .I -9 --listen signature
--HPING2 listen mode, using this option hping2 waits for packet that contain
-+hping listen mode, using this option hping waits for packet that contain
- .I signature
- and dump from
- .I signature
--end to packet's end. For example if hping2 --listen TEST reads a packet
-+end to packet's end. For example if hping --listen TEST reads a packet
- that contain
- .B 234-09sdflkjs45-TESThello_world
- it will display
-@@ -304,7 +304,7 @@
- ensures that target will not gain your real address. However replies
- will be sent to spoofed address, so you will can't see them. In order
- to see how it's possible to perform spoofed/idle scanning see the
--.BR HPING2-HOWTO .
-+.BR hping-HOWTO .
- .TP
- .I --rand-source
- This option enables the
-@@ -347,7 +347,7 @@
- or
- .B --bind
- options. If in doubt try
--.BR "" "`" "hping2 some.host.com -t 1 --traceroute" "'."
-+.BR "" "`" "hping some.host.com -t 1 --traceroute" "'."
- .TP
- .I -N --id
- Set ip->id field. Default id is random but if fragmentation is turned on
-@@ -361,11 +361,11 @@
- .I -W --winid
- id from Windows* systems before Win2k has different byte ordering, if this
- option is enable
--hping2 will properly display id replies from those Windows.
-+hping will properly display id replies from those Windows.
- .TP
- .I -r --rel
- Display id increments instead of id. See the
--.B HPING2-HOWTO
-+.B hping-HOWTO
- for more information. Increments aren't computed as id[N]-id[N-1] but
- using packet loss compensation. See relid.c for more information.
- .TP
-@@ -445,7 +445,7 @@
- .SH TCP/UDP RELATED OPTIONS
- .TP
- .I -s --baseport source port
--hping2 uses source port in order to guess replies sequence number. It
-+hping uses source port in order to guess replies sequence number. It
- starts with a base source port number, and increase this number for each
- packet sent. When packet is received sequence number can be computed as
- .IR "replies.dest.port - base.source.port" .
-@@ -485,7 +485,7 @@
- by target host. This can be useful when you need to analyze whether
- TCP sequence number is predictable. Output example:
- 
--.B #hping2 win98 --seqnum -p 139 -S -i u1 -I eth0
-+.B #hping win98 --seqnum -p 139 -S -i u1 -I eth0
- .nf
- HPING uaz (eth0 192.168.4.41): S set, 40 headers + 0 data bytes
- 2361294848 +2361294848
-@@ -540,8 +540,8 @@
- .SH COMMON OPTIONS
- .TP
- .I -d --data data size
--Set packet body size. Warning, using --data 40 hping2 will not generate
--0 byte packets but protocol_header+40 bytes. hping2 will display
-+Set packet body size. Warning, using --data 40 hping will not generate
-+0 byte packets but protocol_header+40 bytes. hping will display
- packet size information as first line output, like this:
- .B HPING www.yahoo.com (ppp0 204.71.200.67): NO FLAGS are set, 40 headers + 40 data bytes
- .TP
-@@ -577,9 +577,9 @@
- A to host B you may use the following:
- .nf
- .I [host_a]
--.B # hping2 host_b --udp -p 53 -d 100 --sign signature --safe --file /etc/passwd
-+.B # hping host_b --udp -p 53 -d 100 --sign signature --safe --file /etc/passwd
- .I [host_b]
--.B # hping2 host_a --listen signature --safe --icmp
-+.B # hping host_a --listen signature --safe --icmp
- .fi
- .TP
- .I -u --end
-@@ -587,13 +587,13 @@
- .I --file filename
- option, tell you when EOF has been reached. Moreover prevent that other end
- accept more packets. Please, for more information see the
--.BR HPING2-HOWTO .
-+.BR HPING2-HOWTO .
- .TP
- .I -T --traceroute
--Traceroute mode. Using this option hping2 will increase ttl for each
-+Traceroute mode. Using this option hping will increase ttl for each
- .B ICMP time to live 0 during transit
- received. Try
--.BR "hping2 host --traceroute" .
-+.BR "hping host --traceroute" .
- This option implies --bind and --ttl 1. You can override the ttl of 1
- using the --ttl option. Since 2.0.0 stable it prints RTT information.
- .TP
-@@ -601,7 +601,7 @@
- Keep the TTL fixed in traceroute mode, so you can monitor just one hop
- in the route. For example, to monitor how the 5th hop changes or
- how its RTT changes you can try
--.BR "hping2 host --traceroute --ttl 5 --tr-keep-ttl" .
-+.BR "hping host --traceroute --ttl 5 --tr-keep-ttl" .
- .TP
- .I --tr-stop
- If this option is specified hping will exit once the first packet
diff --git a/net/hping-devel/pkg-descr b/net/hping-devel/pkg-descr
deleted file mode 100644
index 326978a146ef..000000000000
--- a/net/hping-devel/pkg-descr
+++ /dev/null
@@ -1,12 +0,0 @@
-hping is a command-line oriented TCP/IP packet assembler/analyzer.
-The interface is inspired to the ping(8) Unix command, but hping isn't
-only able to send ICMP echo requests. It supports TCP, UDP, ICMP and
-RAW-IP protocols, has a traceroute mode, the ability to send files
-between a covered channel, and many other features.
-While hping was mainly used as a security tool in the past, it can be
-used in many ways by people that don't care about security to test
-networks and hosts.
-
-hping3 adds the TCL scripting feature.
-
-WWW: http://www.hping.org/