# New ports collection makefile for: modula-3-lib
# Version required: 3.6
# Date created: 28 Oct 1996
# Whom: John Polstra <jdp@polstra.com>
#
# $Id: Makefile,v 1.12 1998/10/12 16:38:04 jseger Exp $
#
DISTNAME= modula-3-lib-3.6
CATEGORIES= lang
MASTER_SITES= ${MASTER_SITE_LOCAL}
DISTFILES= m3-fbsd-src-3.6.tar.gz \
m3-fbsd-m3cc-3.6.tar.gz \
m3-fbsd-m3ccelf-3.6.tar.gz
# Note: Depending on what is already installed on the system, the code
# below may add some more DISTFILES.
MAINTAINER= jdp@polstra.com
NO_WRKSUBDIR= yes
SCRIPTS_ENV+= MAJOR=${major} PKGDIR=${PKGDIR} PLIST=${PLIST}
# There are two distfiles that may or may not be needed, depending on
# what is already installed on the system. First, we need an executable
# for the Modula-3 compiler, in order to compile the new compiler, which
# is written in Modula-3. Often, there will already be such an executable
# installed on the system. Second, we need many files from gcc-2.7.2.1.
# Often, we can find these in the system sources, under "/usr/src/contrib".
#
# This code tries to avoid fetching the distfiles, unless necessary.
# We look on the system to see whether the necessary files are present,
# and use those if we can. If we cannot find the needed files, we
# fetch the distfiles.
# For the Modula-3 compiler, we look in ${PREFIX} and in /usr/local.
.ifdef PREFIX
have_boot!= /bin/sh scripts/check_files files/T.boot installed ${PREFIX}
.else
have_boot=
.endif
.if empty(have_boot)
have_boot!= /bin/sh scripts/check_files files/T.boot installed /usr/local
.endif
.if empty(have_boot)
DISTFILES+= m3-fbsd-boot-3.6.tar.gz
.endif
# For gcc-2.7.2.1, we look in /usr/src/contrib.
have_gcc!= /bin/sh scripts/check_files files/T.gcc m3cc /usr/src/contrib
.if empty(have_gcc)
DISTFILES+= m3-fbsd-gcc-3.6.tar.gz
.endif
# Support building on systems with or without X11 installed. The port
# only supports X11R6 in the standard location, so we don't bother using
# the X11BASE macro. It's not defined yet at this point in the Makefile
# anyway.
.if exists(/usr/X11R6/lib/libX11.a)
PLIST= ${WRKDIR}/PLIST
.else
PLIST= ${WRKDIR}/PLIST.noX11
.endif
# Startup script, run at boot time
startup_dir= ${PREFIX}/etc/rc.d
startup_script= ${startup_dir}/50.m3.sh
# The Modula-3 build process insists on installing each individual
# component immediately after that component is built. To avoid having
# to do the entire build as root, we arrange for everything to first
# be "installed" into the following directory, which we own.
temp_prefix= ${WRKSRC}/installed
# Where shared libraries are installed, relative to the PREFIX.
libdir= lib/m3/FreeBSD2
# Shared library major version number
major= 6
post-extract:
.if !empty(have_boot)
@echo "Copying bootstrap modula-3 compiler from ${have_boot}"
@${SH} ${SCRIPTDIR}/copy_files ${FILESDIR}/T.boot installed \
${have_boot} ${WRKSRC}
.endif
.if !empty(have_gcc)
@echo "Copying gcc sources from ${have_gcc}"
@${SH} ${SCRIPTDIR}/copy_files ${FILESDIR}/T.gcc m3cc \
${have_gcc} ${WRKSRC}
.endif
@cd ${WRKSRC}/m3cc/gcc; \
chmod +x config.sub configure move-if-change
do-build:
@test -d ${temp_prefix}/bin || ${MKDIR} ${temp_prefix}/bin
@test -d ${temp_prefix}/man/man1 || ${MKDIR} ${temp_prefix}/man/man1
@test -d ${temp_prefix}/lib/m3/pkg/m3build/templates || \
${MKDIR} ${temp_prefix}/lib/m3/pkg/m3build/templates
@echo "++++++++++ quake ++++++++++"
@test -d ${WRKSRC}/m3/quake/FreeBSD2 || \
${MKDIR} ${WRKSRC}/m3/quake/FreeBSD2
@cd ${WRKSRC}/m3/quake/FreeBSD2; \
make -f ../src/makefile TARGET=FreeBSD2 COPT=-O CDEBUG= ; \
${CP} -p quake ${temp_prefix}/bin; \
${CP} -p ../src/quake.1 ${temp_prefix}/man/man1
@echo "++++++++++ m3build ++++++++++"
@cd ${WRKSRC}/m3/m3build; \
PATH=${temp_prefix}/bin:$$PATH ./build FreeBSD2; \
${CP} -p FreeBSD2/m3build FreeBSD2/m3ship FreeBSD2/m3where \
${temp_prefix}/bin; \
${CP} -p FreeBSD2/m3mkdir ${temp_prefix}/${libdir}; \
${CP} -p templates/CLEANUP templates/COMMON templates/COMMON.BOOT \
templates/FreeBSD2 templates/PLATFORMS templates/POSIX \
${temp_prefix}/lib/m3/pkg/m3build/templates; \
${CP} -p FreeBSD2/m3build.1 FreeBSD2/m3ship.1 FreeBSD2/m3where.1 \
${temp_prefix}/man/man1
@echo "++++++++++ m3cc ++++++++++"
@test -d ${WRKSRC}/m3cc/FreeBSD2 || ${MKDIR} ${WRKSRC}/m3cc/FreeBSD2
@cd ${WRKSRC}/m3cc/FreeBSD2; \
../gcc/configure i486-unknown-freebsd; \
make m3cgc1 CC="${CC}" CFLAGS="${CFLAGS}"; \
${CP} -p m3cgc1 ${temp_prefix}/${libdir}
@echo "++++++++++ everything else ++++++++++"
@cd ${WRKSRC}/m3; \
LD_LIBRARY_PATH=${temp_prefix}/${libdir}:$$LD_LIBRARY_PATH; \
PATH=${temp_prefix}/bin:$$PATH; \
export LD_LIBRARY_PATH PATH; \
m3build
pre-install:
@echo "Checking for conflicting shared libraries"
@PREFIX=${PREFIX} ${SH} ${PKGDIR}/INSTALL ${PKGNAME} PRE-INSTALL
do-install:
@echo "Installing shared libraries"
@cd ${temp_prefix}; \
umask 022; \
grep '^lib/m3/' ${PLIST}.real | \
cpio -dump -R ${BINOWN}.${BINGRP} ${PREFIX}
@cd ${PREFIX}; \
grep '^lib/m3/' ${PLIST}.real | xargs chmod go=u-w; \
find -X lib/m3 -type d | xargs chown ${BINOWN}.${BINGRP}; \
find -X lib/m3 -type d | xargs chmod 755
@echo "Installing copyright notice"
@if [ ! -d ${PREFIX}/share/modula-3-lib ]; then \
${MKDIR} ${PREFIX}/share/modula-3-lib; \
chmod 755 ${PREFIX}/share/modula-3-lib; \
fi
@${INSTALL_DATA} ${WRKSRC}/m3/src/COPYRIGHT \
${PREFIX}/share/modula-3-lib
@if [ ! -f ${startup_script} ]; then \
echo "Installing ${startup_script} file"; \
test -d ${startup_dir} || ${MKDIR} ${startup_dir}; \
echo "#!/bin/sh" > ${startup_script}; \
echo "echo -n ' Modula-3'" >> ${startup_script}; \
echo "/sbin/ldconfig -m ${PREFIX}/lib/m3/FreeBSD2" \
>> ${startup_script}; \
chmod 755 ${startup_script}; \
fi
@echo "Running ldconfig"
@${SETENV} OBJFORMAT=${PORTOBJFORMAT} ${LDCONFIG} -m ${PREFIX}/lib/m3/FreeBSD2
.include <bsd.port.mk>