Remove deprecated ports: lang/python15 and lang/python20.

10 files changed, 0 insertions, 2080 deletions

diff --git a/lang/python15/files/Setup b/lang/python15/files/Setup
deleted file mode 100644
index 19e192a5266f..000000000000
--- a/lang/python15/files/Setup
+++ /dev/null
@@ -1,401 +0,0 @@
-# The file Setup is used by the makesetup script to construct the files
-# Makefile and config.c, from Makefile.pre and config.c.in,
-# respectively.  The file Setup itself is initially copied from
-# Setup.in; once it exists it will not be overwritten, so you can edit
-# Setup to your heart's content.  Note that Makefile.pre is created
-# from Makefile.pre.in by the toplevel configure script.
-
-# (VPATH notes: Setup and Makefile.pre are in the build directory, as
-# are Makefile and config.c; the *.in files are in the source
-# directory.)
-
-# Each line in this file describes one or more optional modules.
-# Comment out lines to suppress modules.
-# Lines have the following structure:
-#
-# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
-#
-# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
-# <cpparg> is anything starting with -I, -D, -U or -C
-# <library> is anything ending in .a or beginning with -l or -L
-# <module> is anything else but should be a valid Python
-# identifier (letters, digits, underscores, beginning with non-digit)
-#
-# Lines can also have the form
-#
-# <name> = <value>
-#
-# which defines a Make variable definition inserted into Makefile.in
-#
-# Finally, if a line has the literal form
-#
-# *shared*
-#
-# (that is including the '*' and '*' !) then the following modules will
-# not be included in the config.c file, nor in the list of objects to be
-# added to the library archive, and their linker options won't be added 
-# to the linker options, but rules to create their .o files and their
-# shared libraries will still be added to the Makefile, and their
-# names will be collected in the Make variable SHAREDMODS.  This is
-# used to build modules as shared libraries.  (They must be installed
-# using "make sharedinstall".)  (For compatibility, *noconfig* has the
-# same effect as *shared*.)
-
-# NOTE: As a standard policy, as many modules as can be supported by a
-# platform should be present.  The distribution comes with all modules
-# enabled that are supported by most platforms and don't require you
-# to ftp sources from elsewhere.
-
-
-# Some special rules to define PYTHONPATH.
-# Edit the definitions below to indicate which options you are using.
-# Don't add any whitespace or comments!
-
-# Directories where library files get installed.
-# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
-DESTLIB=$(LIBDEST)
-MACHDESTLIB=$(BINLIBDEST)
-
-# NOTE: all the paths are now relative to the prefix that is computed
-# at run time!
-
-# Standard path -- don't edit.
-# No leading colon since this is the first entry
-# Empty since this is now just the runtime prefix.
-DESTPATH=
-
-# Site specific path insertions -- should begin with : if non-empty
-SITEPATH=
-
-# Standard enabled (tests are always available)
-TESTPATH=:test
-
-# Path for machine- or system-dependent modules (and shared libraries)
-MACHDEPPATH=:plat-$(MACHDEP)
-
-COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(STDWINPATH)$(TKPATH)
-PYTHONPATH=$(COREPYTHONPATH)
-
-
-# The modules listed here can't be built as shared libraries for
-# various reasons; therefore they are listed here instead of in the
-# normal order.
-
-# Some modules that are normally always on:
-
-regex regexmodule.c regexpr.c	# Regular expressions, GNU Emacs style
-pcre pcremodule.c pypcre.c	# Regular expressions, Perl style (for re.py)
-posix posixmodule.c		# posix (UNIX) system calls
-signal signalmodule.c		# signal(2)
-
-# The SGI specific GL module:
-
-GLHACK=-Dclear=__GLclear
-#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11
-
-# The thread module is now automatically enabled, see Setup.thread.
-
-# Pure module.  Cannot be linked dynamically.
-# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE
-#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE
-#PURE_INCLS=-I/usr/local/include
-#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs
-#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS)
-
-# Uncommenting the following line tells makesetup that all following
-# modules are to be built as shared libraries (see above for more
-# detail):
-
-#*shared*
-
-
-# GNU readline.  Unlike previous Python incarnations, GNU readline is
-# now incorporated in an optional module, configured in the Setup file
-# instead of by a configure script switch.  You may have to insert a
-# -L option pointing to the directory where libreadline.* lives,
-# and you may have to change -ltermcap to -ltermlib or perhaps remove
-# it, depending on your system -- see the GNU readline instructions.
-# It's okay for this to be a shared library, too.
-
-readline readline.c -lmytinfo -lreadline -ltermcap
-
-
-# Modules that should always be present (non UNIX dependent):
-
-array arraymodule.c	# array objects
-cmath cmathmodule.c	# complex math library functions
-math mathmodule.c -lm	# math library functions, e.g. sin()
-strop stropmodule.c	# fast string operations implemented in C
-struct structmodule.c	# binary structure packing/unpacking
-time timemodule.c # -lm	# time operations and variables
-operator operator.c	# operator.add() and similar goodies
-
-_locale _localemodule.c  # access to ISO C locale support
-
-
-# Modules with some UNIX dependencies -- on by default:
-# (If you have a really backward UNIX, select and socket may not be
-# supported...)
-
-fcntl fcntlmodule.c	# fcntl(2) and ioctl(2)
-pwd pwdmodule.c		# pwd(3) 
-grp grpmodule.c		# grp(3)
-select selectmodule.c	# select(2); not on ancient System V
-socket socketmodule.c	# socket(2); not on ancient System V
-errno errnomodule.c	# posix (UNIX) errno values
-
-# The crypt module is now disabled by default because it breaks builds
-# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
-crypt cryptmodule.c -lcrypt	# crypt(3); needs -lcrypt on some systems
-
-*shared*
-
-# Some more UNIX dependent modules -- off by default, since these
-# are not supported by all UNIX systems:
-
-nis nismodule.c 	# Sun yellow pages -- not everywhere
-termios termios.c	# Steen Lumholt's termios module
-resource resource.c	# Jeremy Hylton's rlimit interface
-
-
-# Multimedia modules -- off by default.
-# These don't work for 64-bit platforms!!!
-# These represent audio samples or images as strings:
-
-audioop audioop.c	# Operations on audio samples
-imageop imageop.c	# Operations on images
-rgbimg rgbimgmodule.c   # Read SGI RGB image files (but coded portably)
-
-
-# The stdwin module provides a simple, portable (between X11 and Mac)
-# windowing interface.  You need to ftp the STDWIN library, e.g. from
-# ftp://ftp.cwi.nl/pub/stdwin.  (If you get it elsewhere, be sure to
-# get version 1.0 or higher!)  The STDWIN variable must point to the
-# STDWIN toplevel directory.
-
-# Uncomment and edit as needed:
-#STDWIN=/ufs/guido/src/stdwin
-
-# Uncomment these lines:
-#STDWINPATH=:$(DESTLIB)/stdwin
-#LIBTEXTEDIT=$(STDWIN)/$(MACHDEP)/Packs/textedit/libtextedit.a
-#LIBX11STDWIN=$(STDWIN)/$(MACHDEP)/Ports/x11/libstdwin.a
-#stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBX11STDWIN) -lX11
-
-# Use this instead of the last two lines above for alphanumeric stdwin:
-#LIBALFASTDWIN=$(STDWIN)/$(MACHDEP)/Ports/alfa/libstdwin.a
-#stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBALFASTDWIN) -ltermcap
-
-
-# The md5 module implements the RSA Data Security, Inc. MD5
-# Message-Digest Algorithm, described in RFC 1321.  The necessary files
-# md5c.c and md5.h are included here.
-
-md5 md5module.c md5c.c
-
-
-# The sha module implements the SHA checksum algorithm.
-# (NIST's Secure Hash Algorithm.)
-sha shamodule.c
-
-
-# The mpz module interfaces to the GNU Multiple Precision library.
-# You need to ftp the GNU MP library.  
-# The GMP variable must point to the GMP source directory.
-# This was originally written and tested against GMP 1.2 and 1.3.2.
-# It has been modified by Rob Hooft to work with 2.0.2 as well, but I
-# haven't tested it recently.
-
-# A compatible MP library unencombered by the GPL also exists.  It was
-# posted to comp.sources.misc in volume 40 and is widely available from
-# FTP archive sites. One URL for it is:
-# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z
-
-#GMP=/ufs/guido/src/gmp
-#mpz mpzmodule.c -lgmp
-
-
-# SGI IRIX specific modules -- off by default.
-
-# These module work on any SGI machine:
-
-# *** gl must be enabled higher up in this file ***
-#fm fmmodule.c -lfm -lgl		# Font Manager
-#sgi sgimodule.c			# sgi.nap() and a few more
-
-# This module requires the header file
-# /usr/people/4Dgifts/iristools/include/izoom.h:
-
-#imgfile imgfile.c -limage -lgutil -lm	# Image Processing Utilities
-
-
-# These modules require the Multimedia Development Option (I think):
-
-#al almodule.c -laudio			# Audio Library
-#cd cdmodule.c -lcdaudio -lds -lmediad	# CD Audio Library
-#cl clmodule.c -lcl -lawareaudio	# Compression Library
-#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11	# Starter Video
-
-
-# The FORMS library, by Mark Overmars, implements user interface
-# components such as dialogs and buttons using SGI's GL and FM
-# libraries.  You must ftp the FORMS library separately from
-# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS.  It was tested with FORMS 2.2a.
-# The FORMS variable must point to the FORMS subdirectory of the forms
-# toplevel directory:
-
-#FORMS=/ufs/guido/src/forms/FORMS
-#fl flmodule.c -I$(FORMS) $(FORMS)/libforms.a -lfm -lgl
-
-
-# SunOS specific modules -- off by default:
-
-#sunaudiodev sunaudiodev.c
-
-
-# George Neville-Neil's timing module:
-
-timing timingmodule.c
-
-
-# The _tkinter module.
-#
-# The TKPATH variable is always enabled, to save you the effort.
-TKPATH=:lib-tk
-
-# The command for _tkinter is long and site specific.  Please
-# uncomment and/or edit those parts as indicated.  If you don't have a
-# specific extension (e.g. Tix or BLT), leave the corresponding line
-# commented out.  (Leave the trailing backslashes in!  If you
-# experience strange errors, you may want to join all uncommented
-# lines and remove the backslashes -- the backslash interpretation is
-# done by the shell's "read" command and it may not be implemented on
-# every system.
-
-# *** Always uncomment this (leave the leading underscore in!):
-# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
-# *** Uncommend and edit to reflect where your X11 header files are:
-#	-I/usr/X11R6/include \
-# *** Or uncomment this for Solaris:
-#	-I/usr/openwin/include \
-# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
-#	-I/usr/local/include \
-# *** Uncomment and edit for Tix extension only:
-#	-DWITH_TIX -ltix4.1.8.0 \
-# *** Uncomment and edit for BLT extension only:
-#	-DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
-# *** Uncomment and edit for PIL (TkImaging) extension only:
-#	-DWITH_PIL -I../Extensions/Imaging/libImaging  tkImaging.c \
-# *** Uncomment and edit for Mesa (what's Mesa?):
-#	-lGL -lGLU -lMesatk -lMesaaux \
-# *** Uncomment and edit for TOGL extension only:
-#	-DWITH_TOGL togl.c \
-# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
-#	-L/usr/local/lib \
-# *** Uncomment and edit to reflect your Tcl/Tk versions:
-#	-ltk8.0 -ltcl8.0 \
-# *** Uncomment and edit to reflect where your X11 libraries are:
-#	-L/usr/X11R6/lib \
-# *** Or uncomment this for Solaris:
-#	-L/usr/openwin/lib \
-# *** Always uncomment this; X11 libraries to link with:
-#	-lX11 -lXext -lXmu
-
-
-# Lance Ellinghaus's modules:
-
-rotor rotormodule.c		# enigma-inspired encryption
-syslog syslogmodule.c		# syslog daemon interface
-
-
-# Lance's curses module.  This requires the System V version of
-# curses, sometimes known as ncurses (e.g. on Linux, link with
-# -lncurses instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include
-# -L/usr/5lib before -lcurses).
-
-curses cursesmodule.c -lmytinfo -lncurses -ltermcap
-
-
-
-# Tommy Burnette's 'new' module (creates new empty objects of certain kinds):
-
-new newmodule.c
-
-
-# Generic (SunOS / SVR4) dynamic loading module.
-# This is not needed for dynamic loading of Python modules --
-# it is a highly experimental and dangerous device for calling
-# *arbitrary* C functions in *arbitrary* shared libraries:
-
-dl dlmodule.c
-
-# Modules that provide persistent dictionary-like semantics.  You will
-# probably want to arrange for at least one of them to be available on
-# your machine, though none are defined by default because of library
-# dependencies.  The Python module anydbm.py provides an
-# implementation independent wrapper for these; dumbdbm.py provides
-# similar functionality (but slower of course) implemented in Python.
-
-# The standard Unix dbm module:
-
-dbm dbmmodule.c 	# dbm(3) may require -lndbm or similar
-
-# Anthony Baxter's gdbm module (derived from Jack's dbm module)
-# GNU dbm(3) will require -lgdbm:
-
-#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
-
-
-# Berkeley DB interface.
-#
-# This requires the Berkeley DB code, see
-# ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz
-#
-# Edit the variables DB and DBPORT to point to the db top directory
-# and the subdirectory of PORT where you built it.
-
-#DB=/depot/sundry/src/db.1.85/
-#DBPORT=$(DB)/PORT/sunos.5.2
-#bsddb bsddbmodule.o -I$(DB)/include -I$(DBPORT) $(DBPORT)/libdb.a
-bsddb bsddbmodule.o
-
-
-
-# David Wayne Williams' soundex module
-#soundex soundex.c
-
-# Helper module for various ascii-encoders
-binascii binascii.c
-
-# Fred Drake's interface to the Python parser.
-parser parsermodule.c
-
-# Digital Creations' cStringIO and cPickle
-cStringIO cStringIO.c
-cPickle cPickle.c
-
-
-# Lee Busby's SIGFPE modules.
-# The library to link fpectl with is platform specific.
-# Choose *one* of the options below for fpectl:
-
-# For SGI IRIX (tested on 5.3):
-#fpectl fpectlmodule.c -lfpe
-
-# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
-# (Without the compiler you don't have -lsunmath.)
-#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
-
-# For other systems: see instructions in fpectlmodule.c.
-fpectl fpectlmodule.c
-
-# Test module for fpectl.  No extra libraries needed.
-fpetest fpetestmodule.c
-
-# Andrew Kuchling's zlib module.
-# This require zlib 1.0.4 (or later).  See http://quest.jpl.nasa.gov/zlib/
-zlib zlibmodule.c -lz
-
-
-# Example -- included for reference only:
-# xx xxmodule.c
diff --git a/lang/python15/files/Setup.gmp b/lang/python15/files/Setup.gmp
deleted file mode 100644
index 5e70d8f76734..000000000000
--- a/lang/python15/files/Setup.gmp
+++ /dev/null
@@ -1,16 +0,0 @@
-*shared*
-
-# The mpz module interfaces to the GNU Multiple Precision library.
-# You need to ftp the GNU MP library.  
-# The GMP variable must point to the GMP source directory.
-# This was originally written and tested against GMP 1.2 and 1.3.2.
-# It has been modified by Rob Hooft to work with 2.0.2 as well, but I
-# haven't tested it recently.
-
-# A compatible MP library unencombered by the GPL also exists.  It was
-# posted to comp.sources.misc in volume 40 and is widely available from
-# FTP archive sites. One URL for it is:
-# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z
-
-GMP=/usr/src/contrib/libgmp
-mpz mpzmodule.c -I$(GMP) -I$(GMP)/mpn/generic -lgmp
diff --git a/lang/python15/files/patch-Lib:os.py b/lang/python15/files/patch-Lib:os.py
deleted file mode 100644
index 4a18ed119cbb..000000000000
--- a/lang/python15/files/patch-Lib:os.py
+++ /dev/null
@@ -1,76 +0,0 @@
-*** Lib/os.py.orig	Mon Feb 22 09:40:34 1999
---- Lib/os.py	Mon Nov 11 15:08:52 2002
-***************
-*** 185,192 ****
-  def execvpe(file, args, env):
-      _execvpe(file, args, env)
-  
-- _notfound = None
-  def _execvpe(file, args, env = None):
-      if env:
-          func = execve
-          argrest = (args, env)
---- 185,193 ----
-  def execvpe(file, args, env):
-      _execvpe(file, args, env)
-  
-  def _execvpe(file, args, env = None):
-+     from errno import ENOENT, ENOTDIR
-+ 
-      if env:
-          func = execve
-          argrest = (args, env)
-***************
-*** 194,200 ****
-          func = execv
-          argrest = (args,)
-          env = environ
--     global _notfound
-      head, tail = path.split(file)
-      if head:
-          apply(func, (file,) + argrest)
---- 195,200 ----
-***************
-*** 205,224 ****
-          envpath = defpath
-      import string
-      PATH = string.splitfields(envpath, pathsep)
-!     if not _notfound:
-!         import tempfile
-!         # Exec a file that is guaranteed not to exist
-!         try: execv(tempfile.mktemp(), ())
-!         except error, _notfound: pass
-!     exc, arg = error, _notfound
-      for dir in PATH:
-          fullname = path.join(dir, file)
-          try:
-              apply(func, (fullname,) + argrest)
-!         except error, (errno, msg):
-!             if errno != arg[0]:
-!                 exc, arg = error, (errno, msg)
-!     raise exc, arg
-  
-  # Change environ to automatically call putenv() if it exists
-  try:
---- 205,225 ----
-          envpath = defpath
-      import string
-      PATH = string.splitfields(envpath, pathsep)
-!     saved_exc = None
-!     saved_tb = None
-      for dir in PATH:
-          fullname = path.join(dir, file)
-          try:
-              apply(func, (fullname,) + argrest)
-!         except error, e:
-!             tb = sys.exc_info()[2]
-!             if (e.errno != ENOENT and e.errno != ENOTDIR
-!                 and saved_exc is None):
-!                 saved_exc = e
-!                 saved_tb = tb
-!     if saved_exc:
-!         raise error, saved_exc, saved_tb
-!     raise error, e, tb
-  
-  # Change environ to automatically call putenv() if it exists
-  try:
diff --git a/lang/python15/files/patch-Misc:Makefile.pre.in b/lang/python15/files/patch-Misc:Makefile.pre.in
deleted file mode 100644
index 2eaf2f04c91f..000000000000
--- a/lang/python15/files/patch-Misc:Makefile.pre.in
+++ /dev/null
@@ -1,11 +0,0 @@
---- Misc/Makefile.pre.in.orig	Wed Dec  9 18:05:33 1998
-+++ Misc/Makefile.pre.in	Thu Sep  7 21:04:19 2000
-@@ -92,7 +92,7 @@
- TARGET=		python
- 
- # Installed python binary (used only by boot target)
--PYTHON=		python
-+PYTHON?=	python
- 
- # Add more -I and -D options here
- CFLAGS=		$(OPT) -I$(INCLUDEPY) -I$(EXECINCLUDEPY) $(DEFS)
diff --git a/lang/python15/files/patch-aa b/lang/python15/files/patch-aa
deleted file mode 100644
index 0836dbae9158..000000000000
--- a/lang/python15/files/patch-aa
+++ /dev/null
@@ -1,20 +0,0 @@
---- Makefile.in.orig	Tue Feb 23 10:43:15 1999
-+++ Makefile.in	Sun Aug 13 21:28:59 2000
-@@ -125,14 +125,14 @@
- # Modes for directories, executables and data files created by the
- # install process.  Default to group-writable directories but
- # user-only-writable for executables and data files.
--DIRMODE=	775
-+DIRMODE=	755
- EXEMODE=	755
- FILEMODE=	644
- 
- # Portable install script (configure doesn't always guess right)
- INSTALL=	@srcdir@/install-sh -c
--INSTALL_PROGRAM=${INSTALL} -m $(EXEMODE)
--INSTALL_DATA=	${INSTALL} -m $(FILEMODE)
-+INSTALL_PROGRAM=${BSD_INSTALL_SCRIPT}
-+INSTALL_DATA=	${BSD_INSTALL_DATA}
- 
- # Use this to make a link between python$(VERSION) and python in $(BINDIR)
- LN=@LN@
diff --git a/lang/python15/files/patch-ab b/lang/python15/files/patch-ab
deleted file mode 100644
index fb676ed33a08..000000000000
--- a/lang/python15/files/patch-ab
+++ /dev/null
@@ -1,20 +0,0 @@
---- configure.orig	Sat Apr 10 18:02:18 1999
-+++ configure	Fri Sep 10 09:47:29 1999
-@@ -2246,7 +2246,7 @@
- 		fi ;;
- 	Linux*) LDSHARED="gcc -shared";;
- 	dgux*) LDSHARED="ld -G";;
--	FreeBSD*/3*) LDSHARED="gcc -shared";;
-+	FreeBSD*/3*|FreeBSD*/4*|FreeBSD*/5*) LDSHARED='gcc -shared ${LDFLAGS}';;
- 	FreeBSD*|OpenBSD*) LDSHARED="ld -Bshareable";;
- 	NetBSD*)
- 		if [ "`$CC -dM -E - </dev/null | grep __ELF__`" != "" ]
-@@ -2292,7 +2292,7 @@
- 	AIX*)	LINKFORSHARED='-Wl,-bE:python.exp -lld';;
- 	hp*|HP*)
- 	    LINKFORSHARED="-Wl,-E -Wl,+s -Wl,+b\$(BINLIBDEST)/lib-dynload";;
--	FreeBSD/3*) LINKFORSHARED="-Xlinker -export-dynamic";;
-+	FreeBSD/3*|FreeBSD/4*|FreeBSD*/5*) LINKFORSHARED="-Xlinker -export-dynamic";;
- 	Linux*) LINKFORSHARED="-Xlinker -export-dynamic";;
- 	# -u libsys_s pulls in all symbols in libsys
- 	next/2*|next/3*) LINKFORSHARED="-u libsys_s";;
diff --git a/lang/python15/files/patch-ad b/lang/python15/files/patch-ad
deleted file mode 100644
index ad8e5bff1f9f..000000000000
--- a/lang/python15/files/patch-ad
+++ /dev/null
@@ -1,11 +0,0 @@
---- Lib/tempfile.py-	Fri Apr 16 15:22:41 1999
-+++ Lib/tempfile.py	Fri Apr 16 15:23:16 1999
-@@ -24,7 +24,7 @@
-         pwd = os.getcwd()
-     except (AttributeError, os.error):
-         pwd = os.curdir
--    attempdirs = ['/usr/tmp', '/tmp', pwd]
-+    attempdirs = ['/var/tmp', '/usr/tmp', '/tmp', pwd]
-     if os.name == 'nt':
-         attempdirs.insert(0, 'C:\\TEMP')
-         attempdirs.insert(0, '\\TEMP')
diff --git a/lang/python15/files/patch-ag b/lang/python15/files/patch-ag
deleted file mode 100644
index 5e2feb78c0d3..000000000000
--- a/lang/python15/files/patch-ag
+++ /dev/null
@@ -1,11 +0,0 @@
---- Modules/makesetup.orig	Fri Dec 11 02:10:29 1998
-+++ Modules/makesetup	Mon Aug 23 13:28:50 1999
-@@ -101,7 +101,7 @@
- 	LIBS=
- 	LOCALLIBS=
- 	BASELIBS=
--	while read line
-+	while read -e line
- 	do
- 		# Output DEFS in reverse order so first definition overrides
- 		case $line in
diff --git a/lang/python15/files/plat-freebsd4.sh b/lang/python15/files/plat-freebsd4.sh
deleted file mode 100644
index eac91e036103..000000000000
--- a/lang/python15/files/plat-freebsd4.sh
+++ /dev/null
@@ -1,672 +0,0 @@
-# This is a shell archive.  Save it in a file, remove anything before
-# this line, and then unpack it by entering "sh file".  Note, it may
-# create directories; files and directories will be owned by you and
-# have default permissions.
-#
-# This archive contains:
-#
-#	plat-freebsd4
-#	plat-freebsd4/regen
-#	plat-freebsd4/FCNTL.py
-#	plat-freebsd4/SOCKET.py
-#	plat-freebsd4/IN.py
-#	plat-freebsd4/TERMIOS.py
-#
-echo c - plat-freebsd4
-mkdir -p plat-freebsd4 > /dev/null 2>&1
-echo x - plat-freebsd4/regen
-sed 's/^X//' >plat-freebsd4/regen << 'END-of-plat-freebsd4/regen'
-X#! /bin/sh
-Xset -v
-Xpython ../../Tools/scripts/h2py.py /usr/include/fcntl.h
-Xpython ../../Tools/scripts/h2py.py /usr/include/sys/socket.h
-Xpython ../../Tools/scripts/h2py.py -i '(u_long)' /usr/include/netinet/in.h
-Xpython ../../Tools/scripts/h2py.py /usr/include/termios.h
-END-of-plat-freebsd4/regen
-echo x - plat-freebsd4/FCNTL.py
-sed 's/^X//' >plat-freebsd4/FCNTL.py << 'END-of-plat-freebsd4/FCNTL.py'
-X# Generated by h2py from /usr/include/fcntl.h
-X
-X# Included from sys/types.h
-X
-X# Included from sys/cdefs.h
-Xdef __P(protos): return protos		 
-X
-Xdef __STRING(x): return #x		 
-X
-Xdef __XSTRING(x): return __STRING(x)	 
-X
-Xdef __P(protos): return ()		 
-X
-Xdef __STRING(x): return "x"
-X
-Xdef __RCSID(s): return __IDSTRING(rcsid,s)
-X
-Xdef __RCSID_SOURCE(s): return __IDSTRING(rcsid_source,s)
-X
-Xdef __COPYRIGHT(s): return __IDSTRING(copyright,s)
-X
-X
-X# Included from sys/inttypes.h
-X
-X# Included from machine/ansi.h
-X_BSD_CLOCKID_T_ = int
-X_BSD_PTRDIFF_T_ = int
-X_BSD_SSIZE_T_ = int
-X_BSD_TIME_T_ = long
-X_BSD_TIMER_T_ = int
-X_BSD_CT_RUNE_T_ = int
-X_BSD_PID_T_ = int
-X_BSD_CLK_TCK_ = 128
-X_BSD_CLOCKS_PER_SEC_ = 128
-X
-X# Included from machine/types.h
-Xdef major(x): return ((int)(((u_int)(x) >> 8)&0xff))	 
-X
-Xdef minor(x): return ((int)((x)&0xffff00ff))		 
-X
-X
-X# Included from machine/endian.h
-X_QUAD_HIGHWORD = 1
-X_QUAD_LOWWORD = 0
-XLITTLE_ENDIAN = 1234
-XBIG_ENDIAN = 4321
-XPDP_ENDIAN = 3412
-XBYTE_ORDER = LITTLE_ENDIAN
-Xdef __word_swap_long(x): return \
-X
-Xdef __byte_swap_long(x): return \
-X
-Xdef __byte_swap_long(x): return \
-X
-Xdef __byte_swap_word(x): return \
-X
-Xntohl = __byte_swap_long
-Xntohs = __byte_swap_word
-Xhtonl = __byte_swap_long
-Xhtons = __byte_swap_word
-XNBBY = 8
-XFD_SETSIZE = 1024
-XO_RDONLY = 0x0000
-XO_WRONLY = 0x0001
-XO_RDWR = 0x0002
-XO_ACCMODE = 0x0003
-XFREAD = 0x0001
-XFWRITE = 0x0002
-XO_NONBLOCK = 0x0004
-XO_APPEND = 0x0008
-XO_SHLOCK = 0x0010
-XO_EXLOCK = 0x0020
-XO_ASYNC = 0x0040
-XO_FSYNC = 0x0080
-XO_NOFOLLOW = 0x0100
-XO_CREAT = 0x0200
-XO_TRUNC = 0x0400
-XO_EXCL = 0x0800
-XFMARK = 0x1000
-XFDEFER = 0x2000
-XFHASLOCK = 0x4000
-XO_NOCTTY = 0x8000
-Xdef FFLAGS(oflags): return ((oflags) + 1)
-X
-Xdef OFLAGS(fflags): return ((fflags) - 1)
-X
-XFAPPEND = O_APPEND
-XFASYNC = O_ASYNC
-XFFSYNC = O_FSYNC
-XFNONBLOCK = O_NONBLOCK
-XFNDELAY = O_NONBLOCK
-XO_NDELAY = O_NONBLOCK
-XF_DUPFD = 0
-XF_GETFD = 1
-XF_SETFD = 2
-XF_GETFL = 3
-XF_SETFL = 4
-XF_GETOWN = 5
-XF_SETOWN = 6
-XF_GETLK = 7
-XF_SETLK = 8
-XF_SETLKW = 9
-XFD_CLOEXEC = 1
-XF_RDLCK = 1
-XF_UNLCK = 2
-XF_WRLCK = 3
-XF_WAIT = 0x010
-XF_FLOCK = 0x020
-XF_POSIX = 0x040
-XLOCK_SH = 0x01
-XLOCK_EX = 0x02
-XLOCK_NB = 0x04
-XLOCK_UN = 0x08
-END-of-plat-freebsd4/FCNTL.py
-echo x - plat-freebsd4/SOCKET.py
-sed 's/^X//' >plat-freebsd4/SOCKET.py << 'END-of-plat-freebsd4/SOCKET.py'
-X# Generated by h2py from /usr/include/sys/socket.h
-XSOCK_STREAM = 1
-XSOCK_DGRAM = 2
-XSOCK_RAW = 3
-XSOCK_RDM = 4
-XSOCK_SEQPACKET = 5
-XSO_DEBUG = 0x0001
-XSO_ACCEPTCONN = 0x0002
-XSO_REUSEADDR = 0x0004
-XSO_KEEPALIVE = 0x0008
-XSO_DONTROUTE = 0x0010
-XSO_BROADCAST = 0x0020
-XSO_USELOOPBACK = 0x0040
-XSO_LINGER = 0x0080
-XSO_OOBINLINE = 0x0100
-XSO_REUSEPORT = 0x0200
-XSO_TIMESTAMP = 0x0400
-XSO_SNDBUF = 0x1001
-XSO_RCVBUF = 0x1002
-XSO_SNDLOWAT = 0x1003
-XSO_RCVLOWAT = 0x1004
-XSO_SNDTIMEO = 0x1005
-XSO_RCVTIMEO = 0x1006
-XSO_ERROR = 0x1007
-XSO_TYPE = 0x1008
-XSOL_SOCKET = 0xffff
-XAF_UNSPEC = 0
-XAF_LOCAL = 1
-XAF_UNIX = AF_LOCAL
-XAF_INET = 2
-XAF_IMPLINK = 3
-XAF_PUP = 4
-XAF_CHAOS = 5
-XAF_NS = 6
-XAF_ISO = 7
-XAF_OSI = AF_ISO
-XAF_ECMA = 8
-XAF_DATAKIT = 9
-XAF_CCITT = 10
-XAF_SNA = 11
-XAF_DECnet = 12
-XAF_DLI = 13
-XAF_LAT = 14
-XAF_HYLINK = 15
-XAF_APPLETALK = 16
-XAF_ROUTE = 17
-XAF_LINK = 18
-Xpseudo_AF_XTP = 19
-XAF_COIP = 20
-XAF_CNT = 21
-Xpseudo_AF_RTIP = 22
-XAF_IPX = 23
-XAF_SIP = 24
-Xpseudo_AF_PIP = 25
-XAF_ISDN = 26
-XAF_E164 = AF_ISDN
-Xpseudo_AF_KEY = 27
-XAF_INET6 = 28
-XAF_NATM = 29
-XAF_ATM = 30
-XAF_MAX = 31
-XSOCK_MAXADDRLEN = 255
-XPF_UNSPEC = AF_UNSPEC
-XPF_LOCAL = AF_LOCAL
-XPF_UNIX = PF_LOCAL
-XPF_INET = AF_INET
-XPF_IMPLINK = AF_IMPLINK
-XPF_PUP = AF_PUP
-XPF_CHAOS = AF_CHAOS
-XPF_NS = AF_NS
-XPF_ISO = AF_ISO
-XPF_OSI = AF_ISO
-XPF_ECMA = AF_ECMA
-XPF_DATAKIT = AF_DATAKIT
-XPF_CCITT = AF_CCITT
-XPF_SNA = AF_SNA
-XPF_DECnet = AF_DECnet
-XPF_DLI = AF_DLI
-XPF_LAT = AF_LAT
-XPF_HYLINK = AF_HYLINK
-XPF_APPLETALK = AF_APPLETALK
-XPF_ROUTE = AF_ROUTE
-XPF_LINK = AF_LINK
-XPF_XTP = pseudo_AF_XTP
-XPF_COIP = AF_COIP
-XPF_CNT = AF_CNT
-XPF_SIP = AF_SIP
-XPF_IPX = AF_IPX
-XPF_RTIP = pseudo_AF_RTIP
-XPF_PIP = pseudo_AF_PIP
-XPF_ISDN = AF_ISDN
-XPF_KEY = pseudo_AF_KEY
-XPF_INET6 = AF_INET6
-XPF_NATM = AF_NATM
-XPF_ATM = AF_ATM
-XPF_MAX = AF_MAX
-XNET_MAXID = AF_MAX
-XNET_RT_DUMP = 1
-XNET_RT_FLAGS = 2
-XNET_RT_IFLIST = 3
-XNET_RT_MAXID = 4
-XSOMAXCONN = 128
-XMSG_OOB = 0x1
-XMSG_PEEK = 0x2
-XMSG_DONTROUTE = 0x4
-XMSG_EOR = 0x8
-XMSG_TRUNC = 0x10
-XMSG_CTRUNC = 0x20
-XMSG_WAITALL = 0x40
-XMSG_DONTWAIT = 0x80
-XMSG_EOF = 0x100
-XMSG_COMPAT = 0x8000
-XCMGROUP_MAX = 16
-XSCM_RIGHTS = 0x01
-XSCM_TIMESTAMP = 0x02
-XSCM_CREDS = 0x03
-XSHUT_RD = 0
-XSHUT_WR = 1
-XSHUT_RDWR = 2
-X
-X# Included from sys/cdefs.h
-Xdef __P(protos): return protos		 
-X
-Xdef __STRING(x): return #x		 
-X
-Xdef __XSTRING(x): return __STRING(x)	 
-X
-Xdef __P(protos): return ()		 
-X
-Xdef __STRING(x): return "x"
-X
-Xdef __RCSID(s): return __IDSTRING(rcsid,s)
-X
-Xdef __RCSID_SOURCE(s): return __IDSTRING(rcsid_source,s)
-X
-Xdef __COPYRIGHT(s): return __IDSTRING(copyright,s)
-X
-END-of-plat-freebsd4/SOCKET.py
-echo x - plat-freebsd4/IN.py
-sed 's/^X//' >plat-freebsd4/IN.py << 'END-of-plat-freebsd4/IN.py'
-X# Generated by h2py from /usr/include/netinet/in.h
-XIPPROTO_IP = 0
-XIPPROTO_ICMP = 1
-XIPPROTO_IGMP = 2
-XIPPROTO_GGP = 3
-XIPPROTO_IPIP = 4
-XIPPROTO_TCP = 6
-XIPPROTO_ST = 7
-XIPPROTO_EGP = 8
-XIPPROTO_PIGP = 9
-XIPPROTO_RCCMON = 10
-XIPPROTO_NVPII = 11
-XIPPROTO_PUP = 12
-XIPPROTO_ARGUS = 13
-XIPPROTO_EMCON = 14
-XIPPROTO_XNET = 15
-XIPPROTO_CHAOS = 16
-XIPPROTO_UDP = 17
-XIPPROTO_MUX = 18
-XIPPROTO_MEAS = 19
-XIPPROTO_HMP = 20
-XIPPROTO_PRM = 21
-XIPPROTO_IDP = 22
-XIPPROTO_TRUNK1 = 23
-XIPPROTO_TRUNK2 = 24
-XIPPROTO_LEAF1 = 25
-XIPPROTO_LEAF2 = 26
-XIPPROTO_RDP = 27
-XIPPROTO_IRTP = 28
-XIPPROTO_TP = 29
-XIPPROTO_BLT = 30
-XIPPROTO_NSP = 31
-XIPPROTO_INP = 32
-XIPPROTO_SEP = 33
-XIPPROTO_3PC = 34
-XIPPROTO_IDPR = 35
-XIPPROTO_XTP = 36
-XIPPROTO_DDP = 37
-XIPPROTO_CMTP = 38
-XIPPROTO_TPXX = 39
-XIPPROTO_IL = 40
-XIPPROTO_SIP = 41
-XIPPROTO_SDRP = 42
-XIPPROTO_SIPSR = 43
-XIPPROTO_SIPFRAG = 44
-XIPPROTO_IDRP = 45
-XIPPROTO_RSVP = 46
-XIPPROTO_GRE = 47
-XIPPROTO_MHRP = 48
-XIPPROTO_BHA = 49
-XIPPROTO_ESP = 50
-XIPPROTO_AH = 51
-XIPPROTO_INLSP = 52
-XIPPROTO_SWIPE = 53
-XIPPROTO_NHRP = 54
-XIPPROTO_AHIP = 61
-XIPPROTO_CFTP = 62
-XIPPROTO_HELLO = 63
-XIPPROTO_SATEXPAK = 64
-XIPPROTO_KRYPTOLAN = 65
-XIPPROTO_RVD = 66
-XIPPROTO_IPPC = 67
-XIPPROTO_ADFS = 68
-XIPPROTO_SATMON = 69
-XIPPROTO_VISA = 70
-XIPPROTO_IPCV = 71
-XIPPROTO_CPNX = 72
-XIPPROTO_CPHB = 73
-XIPPROTO_WSN = 74
-XIPPROTO_PVP = 75
-XIPPROTO_BRSATMON = 76
-XIPPROTO_ND = 77
-XIPPROTO_WBMON = 78
-XIPPROTO_WBEXPAK = 79
-XIPPROTO_EON = 80
-XIPPROTO_VMTP = 81
-XIPPROTO_SVMTP = 82
-XIPPROTO_VINES = 83
-XIPPROTO_TTP = 84
-XIPPROTO_IGP = 85
-XIPPROTO_DGP = 86
-XIPPROTO_TCF = 87
-XIPPROTO_IGRP = 88
-XIPPROTO_OSPFIGP = 89
-XIPPROTO_SRPC = 90
-XIPPROTO_LARP = 91
-XIPPROTO_MTP = 92
-XIPPROTO_AX25 = 93
-XIPPROTO_IPEIP = 94
-XIPPROTO_MICP = 95
-XIPPROTO_SCCSP = 96
-XIPPROTO_ETHERIP = 97
-XIPPROTO_ENCAP = 98
-XIPPROTO_APES = 99
-XIPPROTO_GMTP = 100
-XIPPROTO_DIVERT = 254
-XIPPROTO_RAW = 255
-XIPPROTO_MAX = 256
-XIPPORT_RESERVED = 1024
-XIPPORT_USERRESERVED = 5000
-XIPPORT_HIFIRSTAUTO = 49152
-XIPPORT_HILASTAUTO = 65535
-XIPPORT_RESERVEDSTART = 600
-Xdef IN_CLASSA(i): return (((u_int32_t)(i) & 0x80000000) == 0)
-X
-XIN_CLASSA_NET = 0xff000000
-XIN_CLASSA_NSHIFT = 24
-XIN_CLASSA_HOST = 0x00ffffff
-XIN_CLASSA_MAX = 128
-Xdef IN_CLASSB(i): return (((u_int32_t)(i) & 0xc0000000) == 0x80000000)
-X
-XIN_CLASSB_NET = 0xffff0000
-XIN_CLASSB_NSHIFT = 16
-XIN_CLASSB_HOST = 0x0000ffff
-XIN_CLASSB_MAX = 65536
-Xdef IN_CLASSC(i): return (((u_int32_t)(i) & 0xe0000000) == 0xc0000000)
-X
-XIN_CLASSC_NET = 0xffffff00
-XIN_CLASSC_NSHIFT = 8
-XIN_CLASSC_HOST = 0x000000ff
-Xdef IN_CLASSD(i): return (((u_int32_t)(i) & 0xf0000000) == 0xe0000000)
-X
-XIN_CLASSD_NET = 0xf0000000
-XIN_CLASSD_NSHIFT = 28
-XIN_CLASSD_HOST = 0x0fffffff
-Xdef IN_MULTICAST(i): return IN_CLASSD(i)
-X
-Xdef IN_EXPERIMENTAL(i): return (((u_int32_t)(i) & 0xf0000000) == 0xf0000000)
-X
-Xdef IN_BADCLASS(i): return (((u_int32_t)(i) & 0xf0000000) == 0xf0000000)
-X
-XINADDR_NONE = 0xffffffff
-XIN_LOOPBACKNET = 127
-XIP_OPTIONS = 1
-XIP_HDRINCL = 2
-XIP_TOS = 3
-XIP_TTL = 4
-XIP_RECVOPTS = 5
-XIP_RECVRETOPTS = 6
-XIP_RECVDSTADDR = 7
-XIP_RETOPTS = 8
-XIP_MULTICAST_IF = 9
-XIP_MULTICAST_TTL = 10
-XIP_MULTICAST_LOOP = 11
-XIP_ADD_MEMBERSHIP = 12
-XIP_DROP_MEMBERSHIP = 13
-XIP_MULTICAST_VIF = 14
-XIP_RSVP_ON = 15
-XIP_RSVP_OFF = 16
-XIP_RSVP_VIF_ON = 17
-XIP_RSVP_VIF_OFF = 18
-XIP_PORTRANGE = 19
-XIP_RECVIF = 20
-XIP_FW_ADD = 50
-XIP_FW_DEL = 51
-XIP_FW_FLUSH = 52
-XIP_FW_ZERO = 53
-XIP_FW_GET = 54
-XIP_NAT = 55
-XIP_DUMMYNET_CONFIGURE = 60
-XIP_DUMMYNET_DEL = 61
-XIP_DUMMYNET_FLUSH = 62
-XIP_DUMMYNET_GET = 64
-XIP_DEFAULT_MULTICAST_TTL = 1
-XIP_DEFAULT_MULTICAST_LOOP = 1
-XIP_MAX_MEMBERSHIPS = 20
-XIP_PORTRANGE_DEFAULT = 0
-XIP_PORTRANGE_HIGH = 1
-XIP_PORTRANGE_LOW = 2
-XIPPROTO_MAXID = (IPPROTO_IDP + 1)
-XIPCTL_FORWARDING = 1
-XIPCTL_SENDREDIRECTS = 2
-XIPCTL_DEFTTL = 3
-XIPCTL_DEFMTU = 4
-XIPCTL_RTEXPIRE = 5
-XIPCTL_RTMINEXPIRE = 6
-XIPCTL_RTMAXCACHE = 7
-XIPCTL_SOURCEROUTE = 8
-XIPCTL_DIRECTEDBROADCAST = 9
-XIPCTL_INTRQMAXLEN = 10
-XIPCTL_INTRQDROPS = 11
-XIPCTL_STATS = 12
-XIPCTL_ACCEPTSOURCEROUTE = 13
-XIPCTL_FASTFORWARDING = 14
-XIPCTL_MAXID = 15
-END-of-plat-freebsd4/IN.py
-echo x - plat-freebsd4/TERMIOS.py
-sed 's/^X//' >plat-freebsd4/TERMIOS.py << 'END-of-plat-freebsd4/TERMIOS.py'
-X# Generated by h2py from /usr/include/termios.h
-XVEOF = 0
-XVEOL = 1
-XVEOL2 = 2
-XVERASE = 3
-XVWERASE = 4
-XVKILL = 5
-XVREPRINT = 6
-XVINTR = 8
-XVQUIT = 9
-XVSUSP = 10
-XVDSUSP = 11
-XVSTART = 12
-XVSTOP = 13
-XVLNEXT = 14
-XVDISCARD = 15
-XVMIN = 16
-XVTIME = 17
-XVSTATUS = 18
-XNCCS = 20
-X_POSIX_VDISABLE = 0xff
-XIGNBRK = 0x00000001
-XBRKINT = 0x00000002
-XIGNPAR = 0x00000004
-XPARMRK = 0x00000008
-XINPCK = 0x00000010
-XISTRIP = 0x00000020
-XINLCR = 0x00000040
-XIGNCR = 0x00000080
-XICRNL = 0x00000100
-XIXON = 0x00000200
-XIXOFF = 0x00000400
-XIXANY = 0x00000800
-XIMAXBEL = 0x00002000
-XOPOST = 0x00000001
-XONLCR = 0x00000002
-XOXTABS = 0x00000004
-XONOEOT = 0x00000008
-XCIGNORE = 0x00000001
-XCSIZE = 0x00000300
-XCS5 = 0x00000000
-XCS6 = 0x00000100
-XCS7 = 0x00000200
-XCS8 = 0x00000300
-XCSTOPB = 0x00000400
-XCREAD = 0x00000800
-XPARENB = 0x00001000
-XPARODD = 0x00002000
-XHUPCL = 0x00004000
-XCLOCAL = 0x00008000
-XCCTS_OFLOW = 0x00010000
-XCRTS_IFLOW = 0x00020000
-XCDTR_IFLOW = 0x00040000
-XCDSR_OFLOW = 0x00080000
-XCCAR_OFLOW = 0x00100000
-XMDMBUF = 0x00100000
-XECHOKE = 0x00000001
-XECHOE = 0x00000002
-XECHOK = 0x00000004
-XECHO = 0x00000008
-XECHONL = 0x00000010
-XECHOPRT = 0x00000020
-XECHOCTL = 0x00000040
-XISIG = 0x00000080
-XICANON = 0x00000100
-XALTWERASE = 0x00000200
-XIEXTEN = 0x00000400
-XEXTPROC = 0x00000800
-XTOSTOP = 0x00400000
-XFLUSHO = 0x00800000
-XNOKERNINFO = 0x02000000
-XPENDIN = 0x20000000
-XNOFLSH = 0x80000000
-XTCSANOW = 0
-XTCSADRAIN = 1
-XTCSAFLUSH = 2
-XTCSASOFT = 0x10
-XB0 = 0
-XB50 = 50
-XB75 = 75
-XB110 = 110
-XB134 = 134
-XB150 = 150
-XB200 = 200
-XB300 = 300
-XB600 = 600
-XB1200 = 1200
-XB1800 = 1800
-XB2400 = 2400
-XB4800 = 4800
-XB9600 = 9600
-XB19200 = 19200
-XB38400 = 38400
-XB7200 = 7200
-XB14400 = 14400
-XB28800 = 28800
-XB57600 = 57600
-XB76800 = 76800
-XB115200 = 115200
-XB230400 = 230400
-XEXTA = 19200
-XEXTB = 38400
-XTCIFLUSH = 1
-XTCOFLUSH = 2
-XTCIOFLUSH = 3
-XTCOOFF = 1
-XTCOON = 2
-XTCIOFF = 3
-XTCION = 4
-X
-X# Included from sys/cdefs.h
-Xdef __P(protos): return protos		 
-X
-Xdef __STRING(x): return #x		 
-X
-Xdef __XSTRING(x): return __STRING(x)	 
-X
-Xdef __P(protos): return ()		 
-X
-Xdef __STRING(x): return "x"
-X
-Xdef __RCSID(s): return __IDSTRING(rcsid,s)
-X
-Xdef __RCSID_SOURCE(s): return __IDSTRING(rcsid_source,s)
-X
-Xdef __COPYRIGHT(s): return __IDSTRING(copyright,s)
-X
-X
-X# Included from sys/ttycom.h
-X
-X# Included from sys/ioccom.h
-XIOCPARM_MASK = 0x1fff
-Xdef IOCPARM_LEN(x): return (((x) >> 16) & IOCPARM_MASK)
-X
-Xdef IOCBASECMD(x): return ((x) & ~(IOCPARM_MASK << 16))
-X
-Xdef IOCGROUP(x): return (((x) >> 8) & 0xff)
-X
-XIOC_VOID = 0x20000000
-XIOC_OUT = 0x40000000
-XIOC_IN = 0x80000000
-XIOC_INOUT = (IOC_IN|IOC_OUT)
-XIOC_DIRMASK = 0xe0000000
-XTIOCM_LE = 0001
-XTIOCM_DTR = 0002
-XTIOCM_RTS = 0004
-XTIOCM_ST = 0010
-XTIOCM_SR = 0020
-XTIOCM_CTS = 0040
-XTIOCM_CAR = 0100
-XTIOCM_CD = TIOCM_CAR
-XTIOCM_RNG = 0200
-XTIOCM_RI = TIOCM_RNG
-XTIOCM_DSR = 0400
-XTIOCPKT_DATA = 0x00
-XTIOCPKT_FLUSHREAD = 0x01
-XTIOCPKT_FLUSHWRITE = 0x02
-XTIOCPKT_STOP = 0x04
-XTIOCPKT_START = 0x08
-XTIOCPKT_NOSTOP = 0x10
-XTIOCPKT_DOSTOP = 0x20
-XTIOCPKT_IOCTL = 0x40
-Xdef UIOCCMD(n): return _IO(ord('u'), n)	 
-X
-XTTYDISC = 0
-XTABLDISC = 3
-XSLIPDISC = 4
-XPPPDISC = 5
-X
-X# Included from sys/ttydefaults.h
-XTTYDEF_IFLAG = (BRKINT	| ICRNL	| IMAXBEL | IXON | IXANY)
-XTTYDEF_OFLAG = (OPOST | ONLCR)
-XTTYDEF_LFLAG = (ECHO | ICANON | ISIG | IEXTEN | ECHOE|ECHOKE|ECHOCTL)
-XTTYDEF_CFLAG = (CREAD | CS8 | HUPCL)
-XTTYDEF_SPEED = (B9600)
-Xdef CTRL(x): return (x&037)
-X
-XCEOF = CTRL(ord('d'))
-XCEOL = 0xff
-XCERASE = 0177
-XCINTR = CTRL(ord('c'))
-XCSTATUS = CTRL(ord('t'))
-XCKILL = CTRL(ord('u'))
-XCMIN = 1
-XCQUIT = 034
-XCSUSP = CTRL(ord('z'))
-XCTIME = 0
-XCDSUSP = CTRL(ord('y'))
-XCSTART = CTRL(ord('q'))
-XCSTOP = CTRL(ord('s'))
-XCLNEXT = CTRL(ord('v'))
-XCDISCARD = CTRL(ord('o'))
-XCWERASE = CTRL(ord('w'))
-XCREPRINT = CTRL(ord('r'))
-XCEOT = CEOF
-XCBRK = CEOL
-XCRPRNT = CREPRINT
-XCFLUSH = CDISCARD
-END-of-plat-freebsd4/TERMIOS.py
-exit
-
diff --git a/lang/python15/files/plat-freebsd5.sh b/lang/python15/files/plat-freebsd5.sh
deleted file mode 100644
index bb4e62a8b77f..000000000000
--- a/lang/python15/files/plat-freebsd5.sh
+++ /dev/null
@@ -1,842 +0,0 @@
-# This is a shell archive.  Save it in a file, remove anything before
-# this line, and then unpack it by entering "sh file".  Note, it may
-# create directories; files and directories will be owned by you and
-# have default permissions.
-#
-# This archive contains:
-#
-#	plat-freebsd5
-#	plat-freebsd5/regen
-#	plat-freebsd5/FCNTL.py
-#	plat-freebsd5/SOCKET.py
-#	plat-freebsd5/IN.py
-#	plat-freebsd5/TERMIOS.py
-#
-echo c - plat-freebsd5
-mkdir -p plat-freebsd5 > /dev/null 2>&1
-echo x - plat-freebsd5/regen
-sed 's/^X//' >plat-freebsd5/regen << 'END-of-plat-freebsd5/regen'
-X#! /bin/sh
-Xset -v
-Xpython ../../Tools/scripts/h2py.py /usr/include/fcntl.h
-Xpython ../../Tools/scripts/h2py.py /usr/include/sys/socket.h
-Xpython ../../Tools/scripts/h2py.py -i '(u_long)' /usr/include/netinet/in.h
-Xpython ../../Tools/scripts/h2py.py /usr/include/termios.h
-END-of-plat-freebsd5/regen
-echo x - plat-freebsd5/FCNTL.py
-sed 's/^X//' >plat-freebsd5/FCNTL.py << 'END-of-plat-freebsd5/FCNTL.py'
-X# Generated by h2py from /usr/include/fcntl.h
-X
-X# Included from sys/types.h
-X
-X# Included from sys/cdefs.h
-Xdef __P(protos): return protos		 
-X
-Xdef __STRING(x): return #x		 
-X
-Xdef __XSTRING(x): return __STRING(x)	 
-X
-Xdef __P(protos): return ()		 
-X
-Xdef __STRING(x): return "x"
-X
-Xdef __RCSID(s): return __IDSTRING(rcsid,s)
-X
-Xdef __RCSID_SOURCE(s): return __IDSTRING(rcsid_source,s)
-X
-Xdef __COPYRIGHT(s): return __IDSTRING(copyright,s)
-X
-X
-X# Included from sys/inttypes.h
-X
-X# Included from machine/ansi.h
-X_BSD_CLOCKID_T_ = int
-X_BSD_PTRDIFF_T_ = int
-X_BSD_SSIZE_T_ = int
-X_BSD_TIME_T_ = long
-X_BSD_TIMER_T_ = int
-X_BSD_CT_RUNE_T_ = int
-X_BSD_PID_T_ = int
-X_BSD_CLK_TCK_ = 128
-X_BSD_CLOCKS_PER_SEC_ = 128
-X
-X# Included from machine/types.h
-Xdef major(x): return ((int)(((u_int)(x) >> 8)&0xff))  
-X
-Xdef minor(x): return ((int)((x)&0xffff00ff))          
-X
-X
-X# Included from machine/endian.h
-X_QUAD_HIGHWORD = 1
-X_QUAD_LOWWORD = 0
-XLITTLE_ENDIAN = 1234
-XBIG_ENDIAN = 4321
-XPDP_ENDIAN = 3412
-XBYTE_ORDER = LITTLE_ENDIAN
-Xdef __word_swap_long(x): return \
-X
-Xdef __byte_swap_long(x): return \
-X
-Xdef __byte_swap_long(x): return \
-X
-Xdef __byte_swap_word(x): return \
-X
-Xntohl = __byte_swap_long
-Xntohs = __byte_swap_word
-Xhtonl = __byte_swap_long
-Xhtons = __byte_swap_word
-XNBBY = 8
-XFD_SETSIZE = 1024
-XO_RDONLY = 0x0000
-XO_WRONLY = 0x0001
-XO_RDWR = 0x0002
-XO_ACCMODE = 0x0003
-XFREAD = 0x0001
-XFWRITE = 0x0002
-XO_NONBLOCK = 0x0004
-XO_APPEND = 0x0008
-XO_SHLOCK = 0x0010
-XO_EXLOCK = 0x0020
-XO_ASYNC = 0x0040
-XO_FSYNC = 0x0080
-XO_NOFOLLOW = 0x0100
-XO_CREAT = 0x0200
-XO_TRUNC = 0x0400
-XO_EXCL = 0x0800
-XFMARK = 0x1000
-XFDEFER = 0x2000
-XFHASLOCK = 0x4000
-XO_NOCTTY = 0x8000
-Xdef FFLAGS(oflags): return ((oflags) + 1)
-X
-Xdef OFLAGS(fflags): return ((fflags) - 1)
-X
-XFAPPEND = O_APPEND
-XFASYNC = O_ASYNC
-XFFSYNC = O_FSYNC
-XFNONBLOCK = O_NONBLOCK
-XFNDELAY = O_NONBLOCK
-XO_NDELAY = O_NONBLOCK
-XF_DUPFD = 0
-XF_GETFD = 1
-XF_SETFD = 2
-XF_GETFL = 3
-XF_SETFL = 4
-XF_GETOWN = 5
-XF_SETOWN = 6
-XF_GETLK = 7
-XF_SETLK = 8
-XF_SETLKW = 9
-XFD_CLOEXEC = 1
-XF_RDLCK = 1
-XF_UNLCK = 2
-XF_WRLCK = 3
-XF_WAIT = 0x010
-XF_FLOCK = 0x020
-XF_POSIX = 0x040
-XLOCK_SH = 0x01
-XLOCK_EX = 0x02
-XLOCK_NB = 0x04
-XLOCK_UN = 0x08
-END-of-plat-freebsd5/FCNTL.py
-echo x - plat-freebsd5/SOCKET.py
-sed 's/^X//' >plat-freebsd5/SOCKET.py << 'END-of-plat-freebsd5/SOCKET.py'
-X# Generated by h2py from /usr/include/sys/socket.h
-XSOCK_STREAM = 1
-XSOCK_DGRAM = 2
-XSOCK_RAW = 3
-XSOCK_RDM = 4
-XSOCK_SEQPACKET = 5
-XSO_DEBUG = 0x0001
-XSO_ACCEPTCONN = 0x0002
-XSO_REUSEADDR = 0x0004
-XSO_KEEPALIVE = 0x0008
-XSO_DONTROUTE = 0x0010
-XSO_BROADCAST = 0x0020
-XSO_USELOOPBACK = 0x0040
-XSO_LINGER = 0x0080
-XSO_OOBINLINE = 0x0100
-XSO_REUSEPORT = 0x0200
-XSO_TIMESTAMP = 0x0400
-XSO_SNDBUF = 0x1001
-XSO_RCVBUF = 0x1002
-XSO_SNDLOWAT = 0x1003
-XSO_RCVLOWAT = 0x1004
-XSO_SNDTIMEO = 0x1005
-XSO_RCVTIMEO = 0x1006
-XSO_ERROR = 0x1007
-XSO_TYPE = 0x1008
-XSOL_SOCKET = 0xffff
-XAF_UNSPEC = 0
-XAF_LOCAL = 1
-XAF_UNIX = AF_LOCAL
-XAF_INET = 2
-XAF_IMPLINK = 3
-XAF_PUP = 4
-XAF_CHAOS = 5
-XAF_NS = 6
-XAF_ISO = 7
-XAF_OSI = AF_ISO
-XAF_ECMA = 8
-XAF_DATAKIT = 9
-XAF_CCITT = 10
-XAF_SNA = 11
-XAF_DECnet = 12
-XAF_DLI = 13
-XAF_LAT = 14
-XAF_HYLINK = 15
-XAF_APPLETALK = 16
-XAF_ROUTE = 17
-XAF_LINK = 18
-Xpseudo_AF_XTP = 19
-XAF_COIP = 20
-XAF_CNT = 21
-Xpseudo_AF_RTIP = 22
-XAF_IPX = 23
-XAF_SIP = 24
-Xpseudo_AF_PIP = 25
-XAF_ISDN = 26
-XAF_E164 = AF_ISDN
-Xpseudo_AF_KEY = 27
-XAF_INET6 = 28
-XAF_NATM = 29
-XAF_ATM = 30
-Xpseudo_AF_HDRCMPLT = 31
-XAF_NETGRAPH = 32
-XAF_MAX = 33
-XSOCK_MAXADDRLEN = 255
-X_SS_MAXSIZE = 128
-XPF_UNSPEC = AF_UNSPEC
-XPF_LOCAL = AF_LOCAL
-XPF_UNIX = PF_LOCAL
-XPF_INET = AF_INET
-XPF_IMPLINK = AF_IMPLINK
-XPF_PUP = AF_PUP
-XPF_CHAOS = AF_CHAOS
-XPF_NS = AF_NS
-XPF_ISO = AF_ISO
-XPF_OSI = AF_ISO
-XPF_ECMA = AF_ECMA
-XPF_DATAKIT = AF_DATAKIT
-XPF_CCITT = AF_CCITT
-XPF_SNA = AF_SNA
-XPF_DECnet = AF_DECnet
-XPF_DLI = AF_DLI
-XPF_LAT = AF_LAT
-XPF_HYLINK = AF_HYLINK
-XPF_APPLETALK = AF_APPLETALK
-XPF_ROUTE = AF_ROUTE
-XPF_LINK = AF_LINK
-XPF_XTP = pseudo_AF_XTP
-XPF_COIP = AF_COIP
-XPF_CNT = AF_CNT
-XPF_SIP = AF_SIP
-XPF_IPX = AF_IPX
-XPF_RTIP = pseudo_AF_RTIP
-XPF_PIP = pseudo_AF_PIP
-XPF_ISDN = AF_ISDN
-XPF_KEY = pseudo_AF_KEY
-XPF_INET6 = AF_INET6
-XPF_NATM = AF_NATM
-XPF_ATM = AF_ATM
-XPF_NETGRAPH = AF_NETGRAPH
-XPF_MAX = AF_MAX
-XNET_MAXID = AF_MAX
-XNET_RT_DUMP = 1
-XNET_RT_FLAGS = 2
-XNET_RT_IFLIST = 3
-XNET_RT_MAXID = 4
-XSOMAXCONN = 128
-XMSG_OOB = 0x1
-XMSG_PEEK = 0x2
-XMSG_DONTROUTE = 0x4
-XMSG_EOR = 0x8
-XMSG_TRUNC = 0x10
-XMSG_CTRUNC = 0x20
-XMSG_WAITALL = 0x40
-XMSG_DONTWAIT = 0x80
-XMSG_EOF = 0x100
-XMSG_COMPAT = 0x8000
-XCMGROUP_MAX = 16
-XSCM_RIGHTS = 0x01
-XSCM_TIMESTAMP = 0x02
-XSCM_CREDS = 0x03
-XSHUT_RD = 0
-XSHUT_WR = 1
-XSHUT_RDWR = 2
-X
-X# Included from sys/cdefs.h
-Xdef __P(protos): return protos		 
-X
-Xdef __STRING(x): return #x		 
-X
-Xdef __XSTRING(x): return __STRING(x)	 
-X
-Xdef __P(protos): return ()		 
-X
-Xdef __STRING(x): return "x"
-X
-Xdef __RCSID(s): return __IDSTRING(rcsid,s)
-X
-Xdef __RCSID_SOURCE(s): return __IDSTRING(rcsid_source,s)
-X
-Xdef __COPYRIGHT(s): return __IDSTRING(copyright,s)
-X
-END-of-plat-freebsd5/SOCKET.py
-echo x - plat-freebsd5/IN.py
-sed 's/^X//' >plat-freebsd5/IN.py << 'END-of-plat-freebsd5/IN.py'
-X# Generated by h2py from /usr/include/netinet/in.h
-XIPPROTO_IP = 0
-XIPPROTO_HOPOPTS = 0
-XIPPROTO_ICMP = 1
-XIPPROTO_IGMP = 2
-XIPPROTO_GGP = 3
-XIPPROTO_IPV4 = 4
-XIPPROTO_IPIP = IPPROTO_IPV4
-XIPPROTO_TCP = 6
-XIPPROTO_ST = 7
-XIPPROTO_EGP = 8
-XIPPROTO_PIGP = 9
-XIPPROTO_RCCMON = 10
-XIPPROTO_NVPII = 11
-XIPPROTO_PUP = 12
-XIPPROTO_ARGUS = 13
-XIPPROTO_EMCON = 14
-XIPPROTO_XNET = 15
-XIPPROTO_CHAOS = 16
-XIPPROTO_UDP = 17
-XIPPROTO_MUX = 18
-XIPPROTO_MEAS = 19
-XIPPROTO_HMP = 20
-XIPPROTO_PRM = 21
-XIPPROTO_IDP = 22
-XIPPROTO_TRUNK1 = 23
-XIPPROTO_TRUNK2 = 24
-XIPPROTO_LEAF1 = 25
-XIPPROTO_LEAF2 = 26
-XIPPROTO_RDP = 27
-XIPPROTO_IRTP = 28
-XIPPROTO_TP = 29
-XIPPROTO_BLT = 30
-XIPPROTO_NSP = 31
-XIPPROTO_INP = 32
-XIPPROTO_SEP = 33
-XIPPROTO_3PC = 34
-XIPPROTO_IDPR = 35
-XIPPROTO_XTP = 36
-XIPPROTO_DDP = 37
-XIPPROTO_CMTP = 38
-XIPPROTO_TPXX = 39
-XIPPROTO_IL = 40
-XIPPROTO_IPV6 = 41
-XIPPROTO_SDRP = 42
-XIPPROTO_ROUTING = 43
-XIPPROTO_FRAGMENT = 44
-XIPPROTO_IDRP = 45
-XIPPROTO_RSVP = 46
-XIPPROTO_GRE = 47
-XIPPROTO_MHRP = 48
-XIPPROTO_BHA = 49
-XIPPROTO_ESP = 50
-XIPPROTO_AH = 51
-XIPPROTO_INLSP = 52
-XIPPROTO_SWIPE = 53
-XIPPROTO_NHRP = 54
-XIPPROTO_ICMPV6 = 58
-XIPPROTO_NONE = 59
-XIPPROTO_DSTOPTS = 60
-XIPPROTO_AHIP = 61
-XIPPROTO_CFTP = 62
-XIPPROTO_HELLO = 63
-XIPPROTO_SATEXPAK = 64
-XIPPROTO_KRYPTOLAN = 65
-XIPPROTO_RVD = 66
-XIPPROTO_IPPC = 67
-XIPPROTO_ADFS = 68
-XIPPROTO_SATMON = 69
-XIPPROTO_VISA = 70
-XIPPROTO_IPCV = 71
-XIPPROTO_CPNX = 72
-XIPPROTO_CPHB = 73
-XIPPROTO_WSN = 74
-XIPPROTO_PVP = 75
-XIPPROTO_BRSATMON = 76
-XIPPROTO_ND = 77
-XIPPROTO_WBMON = 78
-XIPPROTO_WBEXPAK = 79
-XIPPROTO_EON = 80
-XIPPROTO_VMTP = 81
-XIPPROTO_SVMTP = 82
-XIPPROTO_VINES = 83
-XIPPROTO_TTP = 84
-XIPPROTO_IGP = 85
-XIPPROTO_DGP = 86
-XIPPROTO_TCF = 87
-XIPPROTO_IGRP = 88
-XIPPROTO_OSPFIGP = 89
-XIPPROTO_SRPC = 90
-XIPPROTO_LARP = 91
-XIPPROTO_MTP = 92
-XIPPROTO_AX25 = 93
-XIPPROTO_IPEIP = 94
-XIPPROTO_MICP = 95
-XIPPROTO_SCCSP = 96
-XIPPROTO_ETHERIP = 97
-XIPPROTO_ENCAP = 98
-XIPPROTO_APES = 99
-XIPPROTO_GMTP = 100
-XIPPROTO_IPCOMP = 108
-XIPPROTO_PIM = 103
-XIPPROTO_PGM = 113
-XIPPROTO_DIVERT = 254
-XIPPROTO_RAW = 255
-XIPPROTO_MAX = 256
-XIPPROTO_DONE = 257
-XIPPORT_RESERVED = 1024
-XIPPORT_USERRESERVED = 5000
-XIPPORT_HIFIRSTAUTO = 49152
-XIPPORT_HILASTAUTO = 65535
-XIPPORT_RESERVEDSTART = 600
-Xdef IN_CLASSA(i): return (((u_int32_t)(i) & 0x80000000) == 0)
-X
-XIN_CLASSA_NET = 0xff000000
-XIN_CLASSA_NSHIFT = 24
-XIN_CLASSA_HOST = 0x00ffffff
-XIN_CLASSA_MAX = 128
-Xdef IN_CLASSB(i): return (((u_int32_t)(i) & 0xc0000000) == 0x80000000)
-X
-XIN_CLASSB_NET = 0xffff0000
-XIN_CLASSB_NSHIFT = 16
-XIN_CLASSB_HOST = 0x0000ffff
-XIN_CLASSB_MAX = 65536
-Xdef IN_CLASSC(i): return (((u_int32_t)(i) & 0xe0000000) == 0xc0000000)
-X
-XIN_CLASSC_NET = 0xffffff00
-XIN_CLASSC_NSHIFT = 8
-XIN_CLASSC_HOST = 0x000000ff
-Xdef IN_CLASSD(i): return (((u_int32_t)(i) & 0xf0000000) == 0xe0000000)
-X
-XIN_CLASSD_NET = 0xf0000000
-XIN_CLASSD_NSHIFT = 28
-XIN_CLASSD_HOST = 0x0fffffff
-Xdef IN_MULTICAST(i): return IN_CLASSD(i)
-X
-Xdef IN_EXPERIMENTAL(i): return (((u_int32_t)(i) & 0xf0000000) == 0xf0000000)
-X
-Xdef IN_BADCLASS(i): return (((u_int32_t)(i) & 0xf0000000) == 0xf0000000)
-X
-XINADDR_NONE = 0xffffffff
-XIN_LOOPBACKNET = 127
-XINET_ADDRSTRLEN = 16
-XIP_OPTIONS = 1
-XIP_HDRINCL = 2
-XIP_TOS = 3
-XIP_TTL = 4
-XIP_RECVOPTS = 5
-XIP_RECVRETOPTS = 6
-XIP_RECVDSTADDR = 7
-XIP_RETOPTS = 8
-XIP_MULTICAST_IF = 9
-XIP_MULTICAST_TTL = 10
-XIP_MULTICAST_LOOP = 11
-XIP_ADD_MEMBERSHIP = 12
-XIP_DROP_MEMBERSHIP = 13
-XIP_MULTICAST_VIF = 14
-XIP_RSVP_ON = 15
-XIP_RSVP_OFF = 16
-XIP_RSVP_VIF_ON = 17
-XIP_RSVP_VIF_OFF = 18
-XIP_PORTRANGE = 19
-XIP_RECVIF = 20
-XIP_IPSEC_POLICY = 21
-XIP_FAITH = 22
-XIP_FW_ADD = 50
-XIP_FW_DEL = 51
-XIP_FW_FLUSH = 52
-XIP_FW_ZERO = 53
-XIP_FW_GET = 54
-XIP_FW_RESETLOG = 55
-XIP_DUMMYNET_CONFIGURE = 60
-XIP_DUMMYNET_DEL = 61
-XIP_DUMMYNET_FLUSH = 62
-XIP_DUMMYNET_GET = 64
-XIP_DEFAULT_MULTICAST_TTL = 1
-XIP_DEFAULT_MULTICAST_LOOP = 1
-XIP_MAX_MEMBERSHIPS = 20
-XIP_PORTRANGE_DEFAULT = 0
-XIP_PORTRANGE_HIGH = 1
-XIP_PORTRANGE_LOW = 2
-XIPPROTO_MAXID = (IPPROTO_ESP + 1)
-XIPCTL_FORWARDING = 1
-XIPCTL_SENDREDIRECTS = 2
-XIPCTL_DEFTTL = 3
-XIPCTL_DEFMTU = 4
-XIPCTL_RTEXPIRE = 5
-XIPCTL_RTMINEXPIRE = 6
-XIPCTL_RTMAXCACHE = 7
-XIPCTL_SOURCEROUTE = 8
-XIPCTL_DIRECTEDBROADCAST = 9
-XIPCTL_INTRQMAXLEN = 10
-XIPCTL_INTRQDROPS = 11
-XIPCTL_STATS = 12
-XIPCTL_ACCEPTSOURCEROUTE = 13
-XIPCTL_FASTFORWARDING = 14
-XIPCTL_KEEPFAITH = 15
-XIPCTL_GIF_TTL = 16
-XIPCTL_MAXID = 17
-X
-X# Included from netinet6/in6.h
-X
-X# Included from sys/queue.h
-Xdef SLIST_HEAD_INITIALIZER(head): return \
-X
-Xdef SLIST_ENTRY(type): return \
-X
-Xdef STAILQ_HEAD_INITIALIZER(head): return \
-X
-Xdef STAILQ_ENTRY(type): return \
-X
-Xdef LIST_HEAD_INITIALIZER(head): return \
-X
-Xdef LIST_ENTRY(type): return \
-X
-Xdef TAILQ_HEAD_INITIALIZER(head): return \
-X
-Xdef TAILQ_ENTRY(type): return \
-X
-Xdef CIRCLEQ_ENTRY(type): return \
-X
-X__KAME_VERSION = "SNAP 19991101"
-XIPV6PORT_RESERVED = 1024
-XIPV6PORT_ANONMIN = 49152
-XIPV6PORT_ANONMAX = 65535
-XIPV6PORT_RESERVEDMIN = 600
-XIPV6PORT_RESERVEDMAX = (IPV6PORT_RESERVED-1)
-XINET6_ADDRSTRLEN = 46
-XIPV6_ADDR_INT32_ONE = 1
-XIPV6_ADDR_INT32_TWO = 2
-XIPV6_ADDR_INT32_MNL = 0xff010000
-XIPV6_ADDR_INT32_MLL = 0xff020000
-XIPV6_ADDR_INT32_SMP = 0x0000ffff
-XIPV6_ADDR_INT16_ULL = 0xfe80
-XIPV6_ADDR_INT16_USL = 0xfec0
-XIPV6_ADDR_INT16_MLL = 0xff02
-XIPV6_ADDR_INT32_ONE = 0x01000000
-XIPV6_ADDR_INT32_TWO = 0x02000000
-XIPV6_ADDR_INT32_MNL = 0x000001ff
-XIPV6_ADDR_INT32_MLL = 0x000002ff
-XIPV6_ADDR_INT32_SMP = 0xffff0000
-XIPV6_ADDR_INT16_ULL = 0x80fe
-XIPV6_ADDR_INT16_USL = 0xc0fe
-XIPV6_ADDR_INT16_MLL = 0x02ff
-Xdef IN6_IS_ADDR_UNSPECIFIED(a): return \
-X
-Xdef IN6_IS_ADDR_LOOPBACK(a): return \
-X
-Xdef IN6_IS_ADDR_V4COMPAT(a): return \
-X
-Xdef IN6_IS_ADDR_V4MAPPED(a): return \
-X
-XIPV6_ADDR_SCOPE_NODELOCAL = 0x01
-XIPV6_ADDR_SCOPE_LINKLOCAL = 0x02
-XIPV6_ADDR_SCOPE_SITELOCAL = 0x05
-XIPV6_ADDR_SCOPE_ORGLOCAL = 0x08
-XIPV6_ADDR_SCOPE_GLOBAL = 0x0e
-X__IPV6_ADDR_SCOPE_NODELOCAL = 0x01
-X__IPV6_ADDR_SCOPE_LINKLOCAL = 0x02
-X__IPV6_ADDR_SCOPE_SITELOCAL = 0x05
-X__IPV6_ADDR_SCOPE_ORGLOCAL = 0x08
-X__IPV6_ADDR_SCOPE_GLOBAL = 0x0e
-Xdef IN6_IS_ADDR_LINKLOCAL(a): return \
-X
-Xdef IN6_IS_ADDR_SITELOCAL(a): return \
-X
-Xdef IN6_IS_ADDR_MC_NODELOCAL(a): return \
-X
-Xdef IN6_IS_ADDR_MC_LINKLOCAL(a): return \
-X
-Xdef IN6_IS_ADDR_MC_SITELOCAL(a): return \
-X
-Xdef IN6_IS_ADDR_MC_ORGLOCAL(a): return \
-X
-Xdef IN6_IS_ADDR_MC_GLOBAL(a): return \
-X
-Xdef IN6_IS_ADDR_MC_NODELOCAL(a): return \
-X
-Xdef IN6_IS_ADDR_MC_LINKLOCAL(a): return \
-X
-Xdef IN6_IS_ADDR_MC_SITELOCAL(a): return \
-X
-Xdef IN6_IS_ADDR_MC_ORGLOCAL(a): return \
-X
-Xdef IN6_IS_ADDR_MC_GLOBAL(a): return \
-X
-Xdef IN6_IS_SCOPE_LINKLOCAL(a): return \
-X
-XIPV6_OPTIONS = 1
-XIPV6_SOCKOPT_RESERVED1 = 3
-XIPV6_UNICAST_HOPS = 4
-XIPV6_RECVOPTS = 5
-XIPV6_RECVRETOPTS = 6
-XIPV6_RECVDSTADDR = 7
-XIPV6_RETOPTS = 8
-XIPV6_MULTICAST_IF = 9
-XIPV6_MULTICAST_HOPS = 10
-XIPV6_MULTICAST_LOOP = 11
-XIPV6_JOIN_GROUP = 12
-XIPV6_LEAVE_GROUP = 13
-XIPV6_PORTRANGE = 14
-XICMP6_FILTER = 18
-XIPV6_PKTINFO = 19
-XIPV6_HOPLIMIT = 20
-XIPV6_NEXTHOP = 21
-XIPV6_HOPOPTS = 22
-XIPV6_DSTOPTS = 23
-XIPV6_RTHDR = 24
-XIPV6_PKTOPTIONS = 25
-XIPV6_CHECKSUM = 26
-XIPV6_BINDV6ONLY = 27
-XIPV6_IPSEC_POLICY = 28
-XIPV6_FAITH = 29
-XIPV6_FW_ADD = 30
-XIPV6_FW_DEL = 31
-XIPV6_FW_FLUSH = 32
-XIPV6_FW_ZERO = 33
-XIPV6_FW_GET = 34
-XIPV6_RTHDR_LOOSE = 0
-XIPV6_RTHDR_STRICT = 1
-XIPV6_RTHDR_TYPE_0 = 0
-XIPV6_DEFAULT_MULTICAST_HOPS = 1
-XIPV6_DEFAULT_MULTICAST_LOOP = 1
-XIPV6_PORTRANGE_DEFAULT = 0
-XIPV6_PORTRANGE_HIGH = 1
-XIPV6_PORTRANGE_LOW = 2
-XIPV6PROTO_MAXID = (IPPROTO_PIM + 1)
-XIPV6CTL_FORWARDING = 1
-XIPV6CTL_SENDREDIRECTS = 2
-XIPV6CTL_DEFHLIM = 3
-XIPV6CTL_DEFMTU = 4
-XIPV6CTL_FORWSRCRT = 5
-XIPV6CTL_STATS = 6
-XIPV6CTL_MRTSTATS = 7
-XIPV6CTL_MRTPROTO = 8
-XIPV6CTL_MAXFRAGPACKETS = 9
-XIPV6CTL_SOURCECHECK = 10
-XIPV6CTL_SOURCECHECK_LOGINT = 11
-XIPV6CTL_ACCEPT_RTADV = 12
-XIPV6CTL_KEEPFAITH = 13
-XIPV6CTL_LOG_INTERVAL = 14
-XIPV6CTL_HDRNESTLIMIT = 15
-XIPV6CTL_DAD_COUNT = 16
-XIPV6CTL_AUTO_FLOWLABEL = 17
-XIPV6CTL_DEFMCASTHLIM = 18
-XIPV6CTL_GIF_HLIM = 19
-XIPV6CTL_KAME_VERSION = 20
-XIPV6CTL_USE_DEPRECATED = 21
-XIPV6CTL_RR_PRUNE = 22
-XIPV6CTL_MAPPED_ADDR = 23
-XIPV6CTL_MAXID = 24
-END-of-plat-freebsd5/IN.py
-echo x - plat-freebsd5/TERMIOS.py
-sed 's/^X//' >plat-freebsd5/TERMIOS.py << 'END-of-plat-freebsd5/TERMIOS.py'
-X# Generated by h2py from /usr/include/termios.h
-XVEOF = 0
-XVEOL = 1
-XVEOL2 = 2
-XVERASE = 3
-XVWERASE = 4
-XVKILL = 5
-XVREPRINT = 6
-XVINTR = 8
-XVQUIT = 9
-XVSUSP = 10
-XVDSUSP = 11
-XVSTART = 12
-XVSTOP = 13
-XVLNEXT = 14
-XVDISCARD = 15
-XVMIN = 16
-XVTIME = 17
-XVSTATUS = 18
-XNCCS = 20
-X_POSIX_VDISABLE = 0xff
-XIGNBRK = 0x00000001
-XBRKINT = 0x00000002
-XIGNPAR = 0x00000004
-XPARMRK = 0x00000008
-XINPCK = 0x00000010
-XISTRIP = 0x00000020
-XINLCR = 0x00000040
-XIGNCR = 0x00000080
-XICRNL = 0x00000100
-XIXON = 0x00000200
-XIXOFF = 0x00000400
-XIXANY = 0x00000800
-XIMAXBEL = 0x00002000
-XOPOST = 0x00000001
-XONLCR = 0x00000002
-XOXTABS = 0x00000004
-XONOEOT = 0x00000008
-XCIGNORE = 0x00000001
-XCSIZE = 0x00000300
-XCS5 = 0x00000000
-XCS6 = 0x00000100
-XCS7 = 0x00000200
-XCS8 = 0x00000300
-XCSTOPB = 0x00000400
-XCREAD = 0x00000800
-XPARENB = 0x00001000
-XPARODD = 0x00002000
-XHUPCL = 0x00004000
-XCLOCAL = 0x00008000
-XCCTS_OFLOW = 0x00010000
-XCRTS_IFLOW = 0x00020000
-XCDTR_IFLOW = 0x00040000
-XCDSR_OFLOW = 0x00080000
-XCCAR_OFLOW = 0x00100000
-XMDMBUF = 0x00100000
-XECHOKE = 0x00000001
-XECHOE = 0x00000002
-XECHOK = 0x00000004
-XECHO = 0x00000008
-XECHONL = 0x00000010
-XECHOPRT = 0x00000020
-XECHOCTL = 0x00000040
-XISIG = 0x00000080
-XICANON = 0x00000100
-XALTWERASE = 0x00000200
-XIEXTEN = 0x00000400
-XEXTPROC = 0x00000800
-XTOSTOP = 0x00400000
-XFLUSHO = 0x00800000
-XNOKERNINFO = 0x02000000
-XPENDIN = 0x20000000
-XNOFLSH = 0x80000000
-XTCSANOW = 0
-XTCSADRAIN = 1
-XTCSAFLUSH = 2
-XTCSASOFT = 0x10
-XB0 = 0
-XB50 = 50
-XB75 = 75
-XB110 = 110
-XB134 = 134
-XB150 = 150
-XB200 = 200
-XB300 = 300
-XB600 = 600
-XB1200 = 1200
-XB1800 = 1800
-XB2400 = 2400
-XB4800 = 4800
-XB9600 = 9600
-XB19200 = 19200
-XB38400 = 38400
-XB7200 = 7200
-XB14400 = 14400
-XB28800 = 28800
-XB57600 = 57600
-XB76800 = 76800
-XB115200 = 115200
-XB230400 = 230400
-XEXTA = 19200
-XEXTB = 38400
-XTCIFLUSH = 1
-XTCOFLUSH = 2
-XTCIOFLUSH = 3
-XTCOOFF = 1
-XTCOON = 2
-XTCIOFF = 3
-XTCION = 4
-X
-X# Included from sys/cdefs.h
-Xdef __P(protos): return protos		 
-X
-Xdef __STRING(x): return #x		 
-X
-Xdef __XSTRING(x): return __STRING(x)	 
-X
-Xdef __P(protos): return ()		 
-X
-Xdef __STRING(x): return "x"
-X
-Xdef __RCSID(s): return __IDSTRING(rcsid,s)
-X
-Xdef __RCSID_SOURCE(s): return __IDSTRING(rcsid_source,s)
-X
-Xdef __COPYRIGHT(s): return __IDSTRING(copyright,s)
-X
-X
-X# Included from sys/ttycom.h
-X
-X# Included from sys/ioccom.h
-XIOCPARM_MASK = 0x1fff
-Xdef IOCPARM_LEN(x): return (((x) >> 16) & IOCPARM_MASK)
-X
-Xdef IOCBASECMD(x): return ((x) & ~(IOCPARM_MASK << 16))
-X
-Xdef IOCGROUP(x): return (((x) >> 8) & 0xff)
-X
-XIOC_VOID = 0x20000000
-XIOC_OUT = 0x40000000
-XIOC_IN = 0x80000000
-XIOC_INOUT = (IOC_IN|IOC_OUT)
-XIOC_DIRMASK = 0xe0000000
-XTIOCM_LE = 0001
-XTIOCM_DTR = 0002
-XTIOCM_RTS = 0004
-XTIOCM_ST = 0010
-XTIOCM_SR = 0020
-XTIOCM_CTS = 0040
-XTIOCM_CAR = 0100
-XTIOCM_CD = TIOCM_CAR
-XTIOCM_RNG = 0200
-XTIOCM_RI = TIOCM_RNG
-XTIOCM_DSR = 0400
-XTIOCPKT_DATA = 0x00
-XTIOCPKT_FLUSHREAD = 0x01
-XTIOCPKT_FLUSHWRITE = 0x02
-XTIOCPKT_STOP = 0x04
-XTIOCPKT_START = 0x08
-XTIOCPKT_NOSTOP = 0x10
-XTIOCPKT_DOSTOP = 0x20
-XTIOCPKT_IOCTL = 0x40
-Xdef UIOCCMD(n): return _IO(ord('u'), n)	 
-X
-XTTYDISC = 0
-XSLIPDISC = 4
-XPPPDISC = 5
-XNETGRAPHDISC = 6
-X
-X# Included from sys/ttydefaults.h
-XTTYDEF_IFLAG = (BRKINT	| ICRNL	| IMAXBEL | IXON | IXANY)
-XTTYDEF_OFLAG = (OPOST | ONLCR)
-XTTYDEF_LFLAG = (ECHO | ICANON | ISIG | IEXTEN | ECHOE|ECHOKE|ECHOCTL)
-XTTYDEF_CFLAG = (CREAD | CS8 | HUPCL)
-XTTYDEF_SPEED = (B9600)
-Xdef CTRL(x): return (x&037)
-X
-XCEOF = CTRL(ord('d'))
-XCEOL = 0xff
-XCERASE = 0177
-XCINTR = CTRL(ord('c'))
-XCSTATUS = CTRL(ord('t'))
-XCKILL = CTRL(ord('u'))
-XCMIN = 1
-XCQUIT = 034
-XCSUSP = CTRL(ord('z'))
-XCTIME = 0
-XCDSUSP = CTRL(ord('y'))
-XCSTART = CTRL(ord('q'))
-XCSTOP = CTRL(ord('s'))
-XCLNEXT = CTRL(ord('v'))
-XCDISCARD = CTRL(ord('o'))
-XCWERASE = CTRL(ord('w'))
-XCREPRINT = CTRL(ord('r'))
-XCEOT = CEOF
-XCBRK = CEOL
-XCRPRNT = CREPRINT
-XCFLUSH = CDISCARD
-END-of-plat-freebsd5/TERMIOS.py
-exit
-