Remove expired ports:

2017-01-07 databases/rubygem-dm-rails: Depends on deprecated www/rubygem-actionpack
2017-01-07 databases/rubygem-activerecord: Upstream support ended
2017-01-07 devel/rubygem-activesupport: Upstream support ended
2017-01-07 devel/rubygem-tzinfo03: Use devel/rubygem-tzinfo instead
2017-01-07 devel/rubygem-sprockets22: Use devel/rubygem-sprockets or devel/rubygem-sprockets3 instead
2017-01-07 devel/rubygem-prototype-rails: Depends on deprecated www/rubygem-rails
2017-01-07 devel/rubygem-rubigen: Depends on deprecated devel/rubygem-activesupport
2017-01-07 devel/rubygem-coffee-rails: Depends on deprecated www/rubygem-railties
2017-01-07 japanese/rubygem-jpmobile: Depends on deprecated rubygem-rails
2017-01-07 mail/rubygem-actionmailer: Upstream support ended
2017-01-07 mail/rubygem-mail25: Use mail/rubygem-mail instead
2017-01-07 security/dradis: Depends on deprecated www/rubygem-rails
2017-01-07 textproc/rubygem-sass-rails: Depends on deprecated www/rubygem-railties
2017-01-07 www/rubygem-rails: Upstream support ended
2017-01-07 www/rubygem-activeresource: Upstream support ended
2017-01-07 www/rubygem-responders-rails3: Depends on deprecated www/rubygem-railties
2017-01-07 www/rubygem-jquery-ui-rails: Depends on deprecated www/rubygem-railties
2017-01-07 www/rubygem-haml-rails: Depends on deprecated www/rubygem-actionpack
2017-01-07 www/rubygem-jquery-rails: Depends on deprecated www/rubygem-railties
2017-01-07 www/rubygem-railties: Upstream support ended
2017-01-07 www/rubygem-actionpack: Upstream support ended
2017-01-07 databases/rubygem-rubyrep: Depends on deprecated databases/rubygem-activerecord
2017-01-07 databases/rubygem-activerecord-mysql-adapter: Depends on deprecated databases/rubygem-activerecord
2017-01-07 databases/rubygem-dm-active_model: Depends on deprecated databases/rubygem-activemodel

4 files changed, 0 insertions, 227 deletions

diff --git a/databases/rubygem-rubyrep/Makefile b/databases/rubygem-rubyrep/Makefile
deleted file mode 100644
index e484036e766b..000000000000
--- a/databases/rubygem-rubyrep/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-# Created by: Steve Wills <swills@FreeBSD.org>
-# $FreeBSD$
-
-PORTNAME=	rubyrep
-PORTVERSION=	1.2.0
-PORTREVISION=	1
-CATEGORIES=	databases rubygems
-MASTER_SITES=	RG
-
-MAINTAINER=	ltning@anduin.net
-COMMENT=	Multi-master replication and sync for MySQL and PostgreSQL
-
-LICENSE=	MIT
-LICENSE_FILE=	${WRKSRC}/License.txt
-
-BUILD_DEPENDS=	rubygem-activesupport>=${PORTVERSION}:devel/rubygem-activesupport \
-		rubygem-activerecord>=${PORTVERSION}:databases/rubygem-activerecord
-RUN_DEPENDS=	flog>=0:sysutils/flog \
-		rubygem-activesupport>=${PORTVERSION}:devel/rubygem-activesupport \
-		rubygem-activerecord>=${PORTVERSION}:databases/rubygem-activerecord
-
-NO_ARCH=	yes
-USE_RUBY=	yes
-USES=		gem shebangfix
-SHEBANG_FILES=	bin/rubyrep rubyrep
-
-USE_RC_SUBR=	rubyrep
-
-OPTIONS_DEFINE=	MYSQL PGSQL
-OPTIONS_DEFAULT=PGSQL
-
-PLIST_FILES=	bin/rubyrep
-
-PGSQL_RUN_DEPENDS=	rubygem-pg>=0:databases/rubygem-pg
-MYSQL_RUN_DEPENDS=	ruby-mysql>=0:databases/ruby-mysql
-
-DEPRECATED=	Depends on deprecated databases/rubygem-activerecord
-EXPIRATION_DATE=	2017-01-07
-
-.include <bsd.port.mk>
diff --git a/databases/rubygem-rubyrep/distinfo b/databases/rubygem-rubyrep/distinfo
deleted file mode 100644
index fc12be03e417..000000000000
--- a/databases/rubygem-rubyrep/distinfo
+++ /dev/null
@@ -1,2 +0,0 @@
-SHA256 (rubygem/rubyrep-1.2.0.gem) = 35348b04b3bc5babac1f8350caa9458ccfe33a16ec4bdbaa9eb9f94fee0c04d4
-SIZE (rubygem/rubyrep-1.2.0.gem) = 142848
diff --git a/databases/rubygem-rubyrep/files/rubyrep.in b/databases/rubygem-rubyrep/files/rubyrep.in
deleted file mode 100644
index e770745ced26..000000000000
--- a/databases/rubygem-rubyrep/files/rubyrep.in
+++ /dev/null
@@ -1,175 +0,0 @@
-#!/bin/sh
-
-# PROVIDE: rubyrep
-# REQUIRE: NETWORKING SERVERS
-# KEYWORD: shutdown
-
-# Add the following line to /etc/rc.conf to enable `rubyrep':
-#rubyrep_enable="YES"
-# and be sure to configure (at least)
-# %%PREFIX%%/etc/rubyrep/rubyrep.conf
-#
-# To replicate more than one database, change
-#rubyrep_multi="NO"
-# to "YES". A rubyrep process will be started for each file with
-# .conf suffix in $rubyrep_config_dir.
-#
-# Additional options:
-#
-#rubyrep_stdout_log="/var/log/rubyrep.fifo"
-#rubyrep_stderr_log="/var/log/rubyrep_err.fifo"
-#rubyrep_fifo_logs="YES"
-# Specify log files for stdout and stderr. Defaults to using fifos;
-# actual log file will have the extension .log. Additional PID files 
-# will be created for each of the processes used to tap the fifos; 
-# these can be used in newsyslog.conf(5) to automate log rotation.
-#
-#rubyrep_config="%%PREFIX%%/etc/rubyrep.conf"
-# Specify full path to default rubyrep configuration file.
-# NOTE: Ignored if $rubyrep_multi is set to "YES"!
-#
-#rubyrep_config_dir="%%PREFIX%%/etc/rubyrep"
-# Specify directory containing config files for rubyrep. Used
-# by $rubyrep_multi, ignored if $rubyrep_multi="NO" (the default).
-#
-#rubyrep_command="replicate"
-# Specify the command to pass to rubyrep. Usually you'll want to
-# replicate (the default), but it is also possible to specify "proxy",
-# "scan" or "sync". Note: This option applies to all databases if
-# $rubyrep_multi="YES"!
-#
-#rubyrep_command_flags=""
-# Specify options to pass to the $rubyrep_command above. For other
-# operating modes than "replicate" this may be necessary, especially
-# if you want useful log output! Run
-#   %%prefix%%/bin/rubyrep <command> --help
-# for further information.
-
-rubyrep_enable="${rubyrep_enable:-"NO"}"
-rubyrep_multi="${rubyrep_multi:-"NO"}"
-rubyrep_command="${rubyrep_command:-"replicate"}"
-rubyrep_command_flags="${rubyrep_command_flags:-""}"
-rubyrep_config="${rubyrep_config:-"%%PREFIX%%/etc/rubyrep.conf"}"
-rubyrep_config_dir="${rubyrep_config_dir:-"%%PREFIX%%/etc/rubyrep"}"
-rubyrep_user="${rubyrep_user:-"daemon"}"
-rubyrep_stdout_log="${rubyrep_stdout_log:-"/var/log/rubyrep.fifo"}"
-rubyrep_stderr_log="${rubyrep_stderr_log:-"/var/log/rubyrep_err.fifo"}"
-rubyrep_fifo_logs="YES"
-
-. /etc/rc.subr
-
-checkfifo() {
-        # Check and create if necessary fifo special files for logging
-        for f in $stdout_log $stderr_log ; do
-                flog_fifo=$f
-                if [ ! -p "$flog_fifo" ] ; then
-                        mkfifo $flog_fifo ; chown ${rubyrep_user} $flog_fifo
-                fi
-        done
-}
-
-pid_touch () {
-        touch $pidfile
-        chown $rubyrep_user $pidfile
-}
-
-rubyrep_prestart() {
-        pid_touch
-	if [ "$rubyrep_fifo_logs"="YES" ] ; then
-	        umask 027
-		checkfifo
-	        for f in $stdout_log $stderr_log ; do
-	                flog_fifo=$f
-	                flog_args=" -t "
-	                if [ "$cfgname" ] ; then
-				local out_log="`dirname $f`/`basename -s .fifo.$cfgname $flog_fifo`.$cfgname.log"
-				local out_pid="/var/run/`basename -s .fifo.$cfgname $flog_fifo`.$cfgname.flog.pid"
-			else
-				local out_log="`dirname $f`/`basename -s .fifo $flog_fifo`.log"
-				local out_pid="/var/run/`basename -s .fifo $flog_fifo`.flog.pid"
-			fi
-
-	                echo "Enabling logging for $flog_fifo ($out_log, $out_pid)..."
-	                echo "%%PREFIX%%/bin/flog $flog_args $out_log < $flog_fifo &"
-	                %%PREFIX%%/bin/flog $flog_args $out_log < $flog_fifo &
-	                echo $! > $out_pid
-	        done
-	fi
-}
-
-rubyrep_stop() {
-	if [ -f "$pidfile" ] ; then
-		kill -9 `cat $pidfile`
-		rm $pidfile
-	else
-		echo "PID file not found ($pidfile)"
-	fi
-}
-
-rubyrep_poststop() {
-	if [ "$rubyrep_fifo_logs"="YES" ] ; then
-	        for f in $stdout_log $stderr_log ; do
-	                flog_fifo=$f
-	                if [ "$cfgname" ] ; then
-				local out_pid="/var/run/`basename -s .fifo.$cfgname $flog_fifo`.$cfgname.flog.pid"
-			else
-				local out_pid="/var/run/`basename -s .fifo $flog_fifo`.flog.pid"
-			fi
-	                kill $out_pid >/dev/null 2>/dev/null
-	                rm $out_pid >/dev/null 2>/dev/null
-	        done
-	fi
-}
-
-rubyrep_init() {
-	if [ "$rubyrep_multi" = "NO" ] ; then
-		cmdline="%%PREFIX%%/bin/rubyrep generate $rubyrep_config"
-		if [ "$1" = "init" -a -f "$rubyrep_config" ] ; then
-			echo "Skipping file $rubyrep_config (already exists)."
-		else
-			echo "Generating template file $rubyrep_config"
-			$cmdline
-		fi
-	else
-		echo 'Command not available when $rubyrep_multi="YES"'.
-		exit
-	fi
-}
-
-name="rubyrep"
-rcvar=rubyrep_enable
-
-# read configuration and set defaults
-load_rc_config $name
-
-extra_commands="init"
-init_cmd="${name}_init"
-
-command="/usr/sbin/daemon"
-start_precmd="${name}_prestart"
-stop_cmd="${name}_stop"
-stop_postcmd="${name}_poststop"
-rubyrep_command_flags="$rubyrep_command_flags"
-
-if [ "$rubyrep_multi" = "NO" ] ; then
-	stdout_log=${rubyrep_stdout_log}
-	stderr_log=${rubyrep_stderr_log}
-	log_args=">> ${stdout_log} 2>> ${stderr_log} "
-	cmdline="%%PREFIX%%/bin/rubyrep $rubyrep_command $rubyrep_command_flags -c $rubyrep_config"
-	pidfile="/var/run/$name.pid"
-	flags="-p ${pidfile} ${cmdline} ${log_args}"
-	run_rc_command "$1"
-elif [ "$rubyrep_multi" = "YES" ] ; then
-	[ ! -d "$rubyrep_config_dir" ] && mkdir -p "$rubyrep_config_dir"
-	for i in `ls $rubyrep_config_dir/*.conf` ; do
-		rubyrep_config=$i
-		cfgname=$(basename -s .conf $i)
-		stdout_log=${rubyrep_stdout_log}.$cfgname
-		stderr_log=${rubyrep_stderr_log}.$cfgname
-		log_args=">> ${stdout_log} 2>> ${stderr_log} "
-		cmdline="%%PREFIX%%/bin/rubyrep $rubyrep_command $rubyrep_command_flags -c $rubyrep_config"
-		pidfile="/var/run/${name}_${cfgname}.pid"
-		flags="-p ${pidfile} ${cmdline} ${log_args}"
-		run_rc_command "$1"
-	done
-fi
diff --git a/databases/rubygem-rubyrep/pkg-descr b/databases/rubygem-rubyrep/pkg-descr
deleted file mode 100644
index 043e275d8f53..000000000000
--- a/databases/rubygem-rubyrep/pkg-descr
+++ /dev/null
@@ -1,10 +0,0 @@
-Mission:
-Development of an open-source solution for asynchronous, master-master
-replication of relational databases that is
-
-- ridiculously easy to use
-- database independent
-
-Currently supports PostgreSQL and MySQL.
-
-WWW: http://www.rubyrep.org/