--- mtools.conf.orig	Sun Jan  4 01:29:32 1998
+++ mtools.conf	Thu May  7 01:35:37 1998
@@ -1,6 +1,74 @@
 # Example mtools.conf files.  Uncomment the lines which correspond to
 # your architecture and comment out the "SAMPLE FILE" line below
-SAMPLE FILE
+
+# A note on permissions:  a user must have read and write permissions for the
+# devices named here in order to access the DOS file systems.  You might give
+# ALL USERS access to ALL FLOPPY DISKS via the command
+#
+#     chmod a+rw /dev/*fd*
+#
+# or you might give SPECIFIC GROUP MEMBERS access to a PARTICULAR FLOPPY DISK
+# via the commands
+#
+#     chmod g+rw /dev/rfd0 ; chgrp staff /dev/rfd0
+#
+# (and ensure selected people are in a group such as staff).
+
+
+# Floppy disks.  Here, A: and B: use automatic size detection.
+#
+# Example: To prepare drive A: for use as a 1.44M floppy on FreeBSD:
+#   [1] low level format with ......... fdformat /dev/rfd0.1440
+#   [2] write a file system with ...... mkdosfs -f 1440 /dev/rfd0
+#   [3] then use mcopy/mdir etc. in the usual way.
+#
+# The mformat command could also be used to build the DOS file system
+# in place of mkdosfs.
+
+# # FreeBSD floppy drives
+drive a: file="/dev/rfd0"
+drive b: file="/dev/rfd1"
+
+# Drive T: is a 1.72M floppy format with 80 cylinders, double sided (2 heads),
+#          and 43 sectors of size 256 bytes per track.  It uses the same
+#          floppy disk drive (fd0) as drive A: above.
+#
+# Example: To prepare and use a 1.72M floppy on FreeBSD:
+#   [1] low level format with ......... fdformat /dev/rfd0.1720
+#   [2] write a file system with ...... mformat -t 80 -h 2 -s 43 -S 1 t:
+#   [3] then use mcopy/mdir etc. in the usual way.
+#
+# The above note on access permissions applies to /dev/rfd0.1720 as well.
+drive t: file="/dev/rfd0.1720"
+
+# Drive S: is a 720K floppy format with 80 cylinders, double sided (2 heads),
+#          and 43 sectors of size 256 bytes per track.  It uses the same
+#          floppy disk drive (fd0) as drive A: above.
+#
+# Example: To prepare and use a 720K floppy on FreeBSD:
+#   [1] low level format with ......... fdformat /dev/rfd0.720
+#   [2] write a file system with ...... mkdosfs -f 720 /dev/fd0
+#   [3] then use mcopy/mdir etc. in the usual way.
+#
+drive s: file="/dev/rfd0.720"
+
+# SCSI hard disks
+#  first disk (sd0) slice 1 (s1)
+#drive c: file="/dev/rsd0s1"
+
+# IDE hard disks
+#   first disk on the first IDE interface (wd0) slice 1 (s1)
+drive c: file="/dev/rwd0s1"
+#   first disk on the first IDE interface (wd0) slice 3 (s3)
+#drive d: file="/dev/rwd0s3"
+#  second disk on the first IDE interface (wd1) slice 1 (s1)
+#drive d: file="/dev/rwd1s1"
+#  first disk on the second IDE interface (wd2) slice 1 (s1)
+drive d: file="/dev/rwd2s1"
+
+# PCEMU floppy boot image
+drive p: file="/usr/local/lib/pcemu/DriveA"
+
 
 # # Linux floppy drives
 # drive a: file="/dev/fd0" exclusive
@@ -61,4 +129,4 @@
 
 # # uncomment the following line to display all file names in lower
 # # case by default
-# mtools_lower_case=1
+mtools_lower_case=1