From a351214f991b13fe8bb8aab5a4d9e37902fd0ce3 Mon Sep 17 00:00:00 2001 From: Chris Piazza Date: Sat, 4 Dec 1999 22:54:47 +0000 Subject: Import of glx. OpenGL hardware acceleration for RIVA and Matrox G200 based cards. PR: 12661 Submitted by: Marc van Woerkom <3d@freebsd.org> --- graphics/glx/Makefile | 333 ++++++++++++++++++++++++++++++++++++++++++ graphics/utah-glx/Makefile | 333 ++++++++++++++++++++++++++++++++++++++++++ graphics/utah-glx/distinfo | 3 + graphics/utah-glx/pkg-comment | 1 + graphics/utah-glx/pkg-descr | 21 +++ graphics/utah-glx/pkg-message | 29 ++++ graphics/utah-glx/pkg-plist | 31 ++++ 7 files changed, 751 insertions(+) create mode 100644 graphics/glx/Makefile create mode 100644 graphics/utah-glx/Makefile create mode 100644 graphics/utah-glx/distinfo create mode 100644 graphics/utah-glx/pkg-comment create mode 100644 graphics/utah-glx/pkg-descr create mode 100644 graphics/utah-glx/pkg-message create mode 100644 graphics/utah-glx/pkg-plist (limited to 'graphics') diff --git a/graphics/glx/Makefile b/graphics/glx/Makefile new file mode 100644 index 000000000000..ed6942d7f286 --- /dev/null +++ b/graphics/glx/Makefile @@ -0,0 +1,333 @@ +# New ports collection makefile for: GLX +# Version required: CVS +# Date created: 13 September 1999 +# Whom: Marc E E van Woerkom +# +# $Id:$ +# +# +# Notes: +# +# . You need at least XFree86 3.3.4 (or the glx patched 3.3.3.1)! +# This port is set up for 3.3.5 +# +# . Mesa-3.0 has to be uninstalled before this port builds! +# Why? Because we need to create a glx aware version. +# +# . This stuff has been tested with +# - a Diamond Viper 330 (RIVA 128), +# - a Diamond Viper 550 (RIVA TNT), +# - and was reported to work with a Matrox G200 card +# +# . Glx on n-vidia's site is outdated (we have XFree86-3.3.5 now +# so I rolled my own snapshot of the open project glx code. +# It is slightly outdated but will be updated soon. +# +# . The current Mesa3 port for FreeBSD does not stop at the 'patch' +# target, but will instead try to build X11 immediatley if XFree86 +# is not present. +# For this version (XFree86 3.3.5 needs no patches for glx yet) we +# ignore this wrong behaviour. +# +# . We need tclsh for building - the choice for tclsh 8.0 is due to +# lack of time to include a proper selection scheme +# +# . You can set CHIPSET_3D appropriately in /etc/make.conf if the +# question bugs you +# + +DISTNAME= glx-990802 +CATEGORIES= graphics +MASTER_SITES= http://www.freebsd.org/~3d/distfiles/glx/XF3.3.5/ +DISTFILES= ${DISTNAME}.tar.bz2 \ + riva-x-glx.faq.bz2 \ + Mesa-3_0.diff.bz2 + +MAINTAINER= 3d@freebsd.org + +# search for tclsh, if not present build it +BUILD_DEPENDS= tclsh8.0:${PORTSDIR}/lang/tcl80 + +# These settings are here to make future updates to this port easier +#PATCH_XFREE= yes +PATCH_MESA= yes + +.if defined(PATCH_XFREE) +BUILD_DEPENDS= /nonexistent:${PORTSDIR}/x11/XFree86:patch +.endif +.if defined(PATCH_MESA) +BUILD_DEPENDS= /nonexistent:${PORTSDIR}/graphics/Mesa3:patch +.endif + +USE_BZIP2= yes + +EXTRACT_ONLY= ${DISTNAME}.tar.bz2 + +DIST_SUBDIR= glx + +WRKSRC= ${WRKDIR}/${DISTNAME} + +# I don't want to build XFree86 too soon, so don't use USE_X_PREFIX +#USE_X_PREFIX= yes +PREFIX= ${X11BASE} + +XFCONFIG= /etc/XF86Config + +XFREEVER= 3.3.5 +XFREEDIR= ${PORTSDIR}/x11/XFree86/work/xc + +MESAVER= 3.0 +MESADIR= ${PORTSDIR}/graphics/Mesa3/work/Mesa-3.0 + +# As we ask for CHIPSET_3D if not set +IS_INTERACTIVE= YES + +# comment out the following line, +# if you want to build with Imake (Linux/alpha favours that) +USE_AUTOCONF= yes +GNU_CONFIGURE= yes + +# we support nvidia RIVA 128, TNT.. and Matrox G200/400 cards +.if defined(CHIPSET_3D) +.if ${CHIPSET_3D} == RIVA +WITH_CHIPSET= --with-chipset=tnt +.endif +.if ${CHIPSET_3D} == MGA +WITH_CHIPSET= --with-chipset=mga +.endif +.endif + +CONFIGURE_ARGS= --with-mesa=${MESADIR} \ + --with-mesa-version=mesa30 \ + ${WITH_CHIPSET} # --with-mmx-asm --with-3dnow-asm + +USE_GMAKE= yes + +.if !defined(GNU_CONFIGURE) +USE_IMAKE= yes +.endif + +.include + +# +# before 'patch' +# +# . apply some patches to the Mesa 3.0 distribution +# +pre-patch: +.if defined(PATCH_XFREE) + @${ECHO} "=> Patching XFree86-${XFREEVER} for GLX .." + cd ${XFREEDIR}; \ + ${PATCH} -s -f <${FILESDIR}/XFree86-3_3_5.diff +.endif +.if defined(PATCH_MESA) + @${ECHO} "=> Checking Mesa-${MESAVER} installation .." + @if \ + pkg_info -e "Mesa-${MESAVER}"; \ + then \ + ${ECHO} "Found Mesa-${MESAVER} - please deinstall"; \ + ${ECHO} "Aborting.."; \ + ${FALSE} ; \ + fi +.if exists(${MESADIR}/../.glxpatch_done) + @${ECHO} "=> Mesa-${MESAVER} seems already patched for GLX .." +.else + @${ECHO} "=> Patching Mesa-${MESAVER} for GLX acceleration .." + @${ECHO} "(ignore the rejections, as they should happen in comments only)" + -cd ${MESADIR}; \ + bzcat ${DISTDIR}/${DIST_SUBDIR}/Mesa-3_0.diff.bz2 | ${PATCH} -s -f + ${TOUCH} ${MESADIR}/../.glxpatch_done +.endif +.endif + +# +# before 'configure' +# +# . patch glx configure.in, libGL/Makefile.in, +# serverglx/Makefile.in (yes, this is an ugly hack) +# +pre-configure: +.if !defined(CHIPSET_3D) || ${CHIPSET_3D} != RIVA && ${CHIPSET_3D} != MGA + @${ECHO} + @${ECHO} You must set the variable CHIPSET_3D to 'RIVA' if you use + @${ECHO} a nvidia RIVA 128, 128ZX, TNT, TNT2 .. based graphics card, + @${ECHO} or to 'MGA' if you use a Matrox G200/G400 graphics adapter + @${FALSE} +.endif +.if defined(GNU_CONFIGURE) + @${ECHO} "=> Adjusting ${WRKSRC}/configure.in .." + @cd ${WRKSRC}; \ + ${SED} -e 's;tclsh;tclsh8\.0;g' \ + configure.in.new; \ + ${MV} configure.in.new configure.in + @${ECHO} "=> Adjusting ${WRKSRC}/libGL/Makefile.in .." + @cd ${WRKSRC}/libGL; \ + ${SED} -e 's;SOGLREV = 1\.0;SOGLREV = 1;' \ + Makefile.in.new; \ + ${MV} Makefile.in.new Makefile.in + @${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Makefile.in .." + @cd ${WRKSRC}/servGL/serverglx; \ + ${SED} -e 's;tclsh;tclsh8\.0;g' \ + Makefile.in.new; \ + ${MV} Makefile.in.new Makefile.in +.endif + +# +# after 'configure' +# +# . only for the old IMAKE style configuration +# +post-configure: +.if !defined(GNU_CONFIGURE) + @${ECHO} "Using IMAKE" + @${ECHO} "=> Adjusting ${WRKSRC}/Config .." + @cd ${WRKSRC}; \ + ${SED} -e 's;XSERVTOP = .*;XSERVTOP = ${XFREEDIR};' \ + -e 's;MESATOP = .*;MESATOP = ${MESADIR};' \ + Config; + @${ECHO} "=> Adjusting ${WRKSRC}/libGL/Imakefile .." + @cd ${WRKSRC}/libGL; \ + ${SED} -e 's;tclsh;tclsh8\.0;' Imakefile.new; \ + ${MV} Imakefile.new Imakefile + @${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Imakefile .." + @cd ${WRKSRC}/servGL/serverglx; \ + ${SED} -e 's;tclsh;tclsh8\.0;' Imakefile.new; \ + ${MV} Imakefile.new Imakefile +.endif + +# +# before 'build': +# +# . build a glx aware Mesa lib +# . create makefiles (old IMAKE style configuration) +# +pre-build: +.if defined(PATCH_XFREE) + @${ECHO} "=> Building and installing XFree86-${XFREEVER} with GLX support .." + cd ${XFREEDIR}/../..; \ + ${MAKE} all install +.endif +.if defined(PATCH_MESA) + @${ECHO} "=> Building and installing Mesa-${MESAVER} with GLX support .." + cd ${MESADIR}/../..; \ + ${MAKE} all install +.endif +.if !defined(GNU_CONFIGURE) + @${ECHO} "=> Creating makefiles .." + cd ${WRKSRC}; \ + ${XMKMF}; \ + ${MAKE} Makefile; \ + ${MAKE} Makefiles +.endif + +# +# before 'install': +# +# . check for proper installed XFree86 version (3.3.4 or higher) +# . check for glx installation (please deinstall) +# . check for Mesa 3.0 installtion (please deinstall) +# +pre-install: + @${ECHO} "=> Checking XFree86 installation .." + @if \ + pkg_info -e "XFree86-3.3.4"; \ + then \ + ${ECHO} "Found XFree86 3.3.4 - this port should still work"; \ + elif \ + pkg_info -e "XFree86-3.3.5"; \ + then \ + ${ECHO} "OK, found XFree86 3.3.5 - this port should work"; \ + elif \ + pkg_info -e "XFree86-3.3.6"; \ + then \ + ${ECHO} "Found XFree86 3.3.6 - this port should work"; \ + elif \ + pkg_info -e "XFree86-3.3.3.1"; \ + then \ + ${ECHO} ""; \ + ${ECHO} "This port will work only if your XFree86 3.3.3.1 version"; \ + ${ECHO} "has been patched for use with glx!"; \ + ${ECHO} ""; \ + ${ECHO} "Visit 'http://www.freebsd.org/~3d' for more information"; \ + ${ECHO} ""; \ + ${ECHO} "(We continue with fingers crossed)"; \ + ${ECHO} ""; \ + else \ + ${ECHO} ""; \ + ${ECHO} "This port depends on having a proper version of XFree86"; \ + ${ECHO} "installed - preferably ${XFREEVER}!"; \ + ${ECHO} ""; \ + ${ECHO} "Visit 'http://www.freebsd.org/~3d' for more information"; \ + ${ECHO} ""; \ + ${ECHO} "Aborting.."; \ + ${FALSE} ; \ + fi + +# +# after 'install': +# +# . install some docs +# . move old Mesa lib away (old IMAKE style configuration) +# . check XFree86 configuration file for colordepth (RIVA only) +# . check XFree86 configuration file for glx module +# . give some hints +# +post-install: +.if !defined(NOPORTDOCS) + @${ECHO} "=> Installing documentation .." + ${MKDIR} ${PREFIX}/share/doc/riva-glx + ${INSTALL_MAN} ${DISTDIR}/${DIST_SUBDIR}/riva-x-glx.faq.bz2 ${PREFIX}/share/doc/riva-glx + ${INSTALL_MAN} ${WRKSRC}/README ${PREFIX}/share/doc/riva-glx + ${INSTALL_MAN} ${WRKSRC}/tested.html ${PREFIX}/share/doc/riva-glx + +.endif +.if !defined(GNU_CONFIGURE) + @${ECHO} "=> Adjusting links .." + -${MV} ${X11BASE}/lib/libMesaGL.a ${X11BASE}/lib/libMesaGL.a.old + -${MV} ${X11BASE}/lib/libMesaGL.so.14 ${X11BASE}/lib/libMesaGL.so.14.old + -${LN} -s ${X11BASE}/lib/libGL.a ${X11BASE}/lib/libMesaGL.a + -${LN} -s ${X11BASE}/lib/libGL.so.1 ${X11BASE}/lib/libMesaGL.so.14 +.endif +.if !defined(CHIPSET_3D) || ${CHIPSET_3D} == RIVA + @${ECHO} "=> Checking for \"DefaultColorDepth\" in ${XFCONFIG} .." + @${ECHO} "" + @if \ + ${GREP} '^ *DefaultColorDepth *1[56] *$$' ${XFCONFIG}; \ + then \ + ${ECHO} ""; \ + ${ECHO} "Found something."; \ + else \ + ${ECHO} "Nope, nothing found - please use"; \ + ${ECHO} ""; \ + ${ECHO} " DefaultColorDepth 16"; \ + ${ECHO} ""; \ + ${ECHO} "or"; \ + ${ECHO} ""; \ + ${ECHO} " DefaultColorDepth 15"; \ + ${ECHO} ""; \ + ${ECHO} "in your ${XFCONFIG} file with your RIVA card!"; \ + fi +.endif + @${ECHO} "=> Checking for Section \"Module\" in ${XFCONFIG} .." + @${ECHO} "" + @if \ + ${GREP} -A2 '^ *Section *"Module" *$$' ${XFCONFIG} | \ + ${GREP} -B1 -A1 '^ *Load *"glx\.so" *$$' | \ + ${GREP} -B2 '^ *EndSection *$$' | \ + ${GREP} -A2 '^ *Section *"Module" *$$'; \ + then \ + ${ECHO} ""; \ + ${ECHO} "Looks OK to me."; \ + else \ + ${ECHO} "Nope, not found - please add"; \ + ${ECHO} ""; \ + ${ECHO} " Section \"Module\""; \ + ${ECHO} " Load \"glx.so\""; \ + ${ECHO} " EndSection"; \ + ${ECHO} ""; \ + ${ECHO} "to the end of your ${XFCONFIG} file!"; \ + fi + @${ECHO} "=> Giving last advice .." + @${CAT} ${PKGDIR}/MESSAGE + +.include diff --git a/graphics/utah-glx/Makefile b/graphics/utah-glx/Makefile new file mode 100644 index 000000000000..ed6942d7f286 --- /dev/null +++ b/graphics/utah-glx/Makefile @@ -0,0 +1,333 @@ +# New ports collection makefile for: GLX +# Version required: CVS +# Date created: 13 September 1999 +# Whom: Marc E E van Woerkom +# +# $Id:$ +# +# +# Notes: +# +# . You need at least XFree86 3.3.4 (or the glx patched 3.3.3.1)! +# This port is set up for 3.3.5 +# +# . Mesa-3.0 has to be uninstalled before this port builds! +# Why? Because we need to create a glx aware version. +# +# . This stuff has been tested with +# - a Diamond Viper 330 (RIVA 128), +# - a Diamond Viper 550 (RIVA TNT), +# - and was reported to work with a Matrox G200 card +# +# . Glx on n-vidia's site is outdated (we have XFree86-3.3.5 now +# so I rolled my own snapshot of the open project glx code. +# It is slightly outdated but will be updated soon. +# +# . The current Mesa3 port for FreeBSD does not stop at the 'patch' +# target, but will instead try to build X11 immediatley if XFree86 +# is not present. +# For this version (XFree86 3.3.5 needs no patches for glx yet) we +# ignore this wrong behaviour. +# +# . We need tclsh for building - the choice for tclsh 8.0 is due to +# lack of time to include a proper selection scheme +# +# . You can set CHIPSET_3D appropriately in /etc/make.conf if the +# question bugs you +# + +DISTNAME= glx-990802 +CATEGORIES= graphics +MASTER_SITES= http://www.freebsd.org/~3d/distfiles/glx/XF3.3.5/ +DISTFILES= ${DISTNAME}.tar.bz2 \ + riva-x-glx.faq.bz2 \ + Mesa-3_0.diff.bz2 + +MAINTAINER= 3d@freebsd.org + +# search for tclsh, if not present build it +BUILD_DEPENDS= tclsh8.0:${PORTSDIR}/lang/tcl80 + +# These settings are here to make future updates to this port easier +#PATCH_XFREE= yes +PATCH_MESA= yes + +.if defined(PATCH_XFREE) +BUILD_DEPENDS= /nonexistent:${PORTSDIR}/x11/XFree86:patch +.endif +.if defined(PATCH_MESA) +BUILD_DEPENDS= /nonexistent:${PORTSDIR}/graphics/Mesa3:patch +.endif + +USE_BZIP2= yes + +EXTRACT_ONLY= ${DISTNAME}.tar.bz2 + +DIST_SUBDIR= glx + +WRKSRC= ${WRKDIR}/${DISTNAME} + +# I don't want to build XFree86 too soon, so don't use USE_X_PREFIX +#USE_X_PREFIX= yes +PREFIX= ${X11BASE} + +XFCONFIG= /etc/XF86Config + +XFREEVER= 3.3.5 +XFREEDIR= ${PORTSDIR}/x11/XFree86/work/xc + +MESAVER= 3.0 +MESADIR= ${PORTSDIR}/graphics/Mesa3/work/Mesa-3.0 + +# As we ask for CHIPSET_3D if not set +IS_INTERACTIVE= YES + +# comment out the following line, +# if you want to build with Imake (Linux/alpha favours that) +USE_AUTOCONF= yes +GNU_CONFIGURE= yes + +# we support nvidia RIVA 128, TNT.. and Matrox G200/400 cards +.if defined(CHIPSET_3D) +.if ${CHIPSET_3D} == RIVA +WITH_CHIPSET= --with-chipset=tnt +.endif +.if ${CHIPSET_3D} == MGA +WITH_CHIPSET= --with-chipset=mga +.endif +.endif + +CONFIGURE_ARGS= --with-mesa=${MESADIR} \ + --with-mesa-version=mesa30 \ + ${WITH_CHIPSET} # --with-mmx-asm --with-3dnow-asm + +USE_GMAKE= yes + +.if !defined(GNU_CONFIGURE) +USE_IMAKE= yes +.endif + +.include + +# +# before 'patch' +# +# . apply some patches to the Mesa 3.0 distribution +# +pre-patch: +.if defined(PATCH_XFREE) + @${ECHO} "=> Patching XFree86-${XFREEVER} for GLX .." + cd ${XFREEDIR}; \ + ${PATCH} -s -f <${FILESDIR}/XFree86-3_3_5.diff +.endif +.if defined(PATCH_MESA) + @${ECHO} "=> Checking Mesa-${MESAVER} installation .." + @if \ + pkg_info -e "Mesa-${MESAVER}"; \ + then \ + ${ECHO} "Found Mesa-${MESAVER} - please deinstall"; \ + ${ECHO} "Aborting.."; \ + ${FALSE} ; \ + fi +.if exists(${MESADIR}/../.glxpatch_done) + @${ECHO} "=> Mesa-${MESAVER} seems already patched for GLX .." +.else + @${ECHO} "=> Patching Mesa-${MESAVER} for GLX acceleration .." + @${ECHO} "(ignore the rejections, as they should happen in comments only)" + -cd ${MESADIR}; \ + bzcat ${DISTDIR}/${DIST_SUBDIR}/Mesa-3_0.diff.bz2 | ${PATCH} -s -f + ${TOUCH} ${MESADIR}/../.glxpatch_done +.endif +.endif + +# +# before 'configure' +# +# . patch glx configure.in, libGL/Makefile.in, +# serverglx/Makefile.in (yes, this is an ugly hack) +# +pre-configure: +.if !defined(CHIPSET_3D) || ${CHIPSET_3D} != RIVA && ${CHIPSET_3D} != MGA + @${ECHO} + @${ECHO} You must set the variable CHIPSET_3D to 'RIVA' if you use + @${ECHO} a nvidia RIVA 128, 128ZX, TNT, TNT2 .. based graphics card, + @${ECHO} or to 'MGA' if you use a Matrox G200/G400 graphics adapter + @${FALSE} +.endif +.if defined(GNU_CONFIGURE) + @${ECHO} "=> Adjusting ${WRKSRC}/configure.in .." + @cd ${WRKSRC}; \ + ${SED} -e 's;tclsh;tclsh8\.0;g' \ + configure.in.new; \ + ${MV} configure.in.new configure.in + @${ECHO} "=> Adjusting ${WRKSRC}/libGL/Makefile.in .." + @cd ${WRKSRC}/libGL; \ + ${SED} -e 's;SOGLREV = 1\.0;SOGLREV = 1;' \ + Makefile.in.new; \ + ${MV} Makefile.in.new Makefile.in + @${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Makefile.in .." + @cd ${WRKSRC}/servGL/serverglx; \ + ${SED} -e 's;tclsh;tclsh8\.0;g' \ + Makefile.in.new; \ + ${MV} Makefile.in.new Makefile.in +.endif + +# +# after 'configure' +# +# . only for the old IMAKE style configuration +# +post-configure: +.if !defined(GNU_CONFIGURE) + @${ECHO} "Using IMAKE" + @${ECHO} "=> Adjusting ${WRKSRC}/Config .." + @cd ${WRKSRC}; \ + ${SED} -e 's;XSERVTOP = .*;XSERVTOP = ${XFREEDIR};' \ + -e 's;MESATOP = .*;MESATOP = ${MESADIR};' \ + Config; + @${ECHO} "=> Adjusting ${WRKSRC}/libGL/Imakefile .." + @cd ${WRKSRC}/libGL; \ + ${SED} -e 's;tclsh;tclsh8\.0;' Imakefile.new; \ + ${MV} Imakefile.new Imakefile + @${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Imakefile .." + @cd ${WRKSRC}/servGL/serverglx; \ + ${SED} -e 's;tclsh;tclsh8\.0;' Imakefile.new; \ + ${MV} Imakefile.new Imakefile +.endif + +# +# before 'build': +# +# . build a glx aware Mesa lib +# . create makefiles (old IMAKE style configuration) +# +pre-build: +.if defined(PATCH_XFREE) + @${ECHO} "=> Building and installing XFree86-${XFREEVER} with GLX support .." + cd ${XFREEDIR}/../..; \ + ${MAKE} all install +.endif +.if defined(PATCH_MESA) + @${ECHO} "=> Building and installing Mesa-${MESAVER} with GLX support .." + cd ${MESADIR}/../..; \ + ${MAKE} all install +.endif +.if !defined(GNU_CONFIGURE) + @${ECHO} "=> Creating makefiles .." + cd ${WRKSRC}; \ + ${XMKMF}; \ + ${MAKE} Makefile; \ + ${MAKE} Makefiles +.endif + +# +# before 'install': +# +# . check for proper installed XFree86 version (3.3.4 or higher) +# . check for glx installation (please deinstall) +# . check for Mesa 3.0 installtion (please deinstall) +# +pre-install: + @${ECHO} "=> Checking XFree86 installation .." + @if \ + pkg_info -e "XFree86-3.3.4"; \ + then \ + ${ECHO} "Found XFree86 3.3.4 - this port should still work"; \ + elif \ + pkg_info -e "XFree86-3.3.5"; \ + then \ + ${ECHO} "OK, found XFree86 3.3.5 - this port should work"; \ + elif \ + pkg_info -e "XFree86-3.3.6"; \ + then \ + ${ECHO} "Found XFree86 3.3.6 - this port should work"; \ + elif \ + pkg_info -e "XFree86-3.3.3.1"; \ + then \ + ${ECHO} ""; \ + ${ECHO} "This port will work only if your XFree86 3.3.3.1 version"; \ + ${ECHO} "has been patched for use with glx!"; \ + ${ECHO} ""; \ + ${ECHO} "Visit 'http://www.freebsd.org/~3d' for more information"; \ + ${ECHO} ""; \ + ${ECHO} "(We continue with fingers crossed)"; \ + ${ECHO} ""; \ + else \ + ${ECHO} ""; \ + ${ECHO} "This port depends on having a proper version of XFree86"; \ + ${ECHO} "installed - preferably ${XFREEVER}!"; \ + ${ECHO} ""; \ + ${ECHO} "Visit 'http://www.freebsd.org/~3d' for more information"; \ + ${ECHO} ""; \ + ${ECHO} "Aborting.."; \ + ${FALSE} ; \ + fi + +# +# after 'install': +# +# . install some docs +# . move old Mesa lib away (old IMAKE style configuration) +# . check XFree86 configuration file for colordepth (RIVA only) +# . check XFree86 configuration file for glx module +# . give some hints +# +post-install: +.if !defined(NOPORTDOCS) + @${ECHO} "=> Installing documentation .." + ${MKDIR} ${PREFIX}/share/doc/riva-glx + ${INSTALL_MAN} ${DISTDIR}/${DIST_SUBDIR}/riva-x-glx.faq.bz2 ${PREFIX}/share/doc/riva-glx + ${INSTALL_MAN} ${WRKSRC}/README ${PREFIX}/share/doc/riva-glx + ${INSTALL_MAN} ${WRKSRC}/tested.html ${PREFIX}/share/doc/riva-glx + +.endif +.if !defined(GNU_CONFIGURE) + @${ECHO} "=> Adjusting links .." + -${MV} ${X11BASE}/lib/libMesaGL.a ${X11BASE}/lib/libMesaGL.a.old + -${MV} ${X11BASE}/lib/libMesaGL.so.14 ${X11BASE}/lib/libMesaGL.so.14.old + -${LN} -s ${X11BASE}/lib/libGL.a ${X11BASE}/lib/libMesaGL.a + -${LN} -s ${X11BASE}/lib/libGL.so.1 ${X11BASE}/lib/libMesaGL.so.14 +.endif +.if !defined(CHIPSET_3D) || ${CHIPSET_3D} == RIVA + @${ECHO} "=> Checking for \"DefaultColorDepth\" in ${XFCONFIG} .." + @${ECHO} "" + @if \ + ${GREP} '^ *DefaultColorDepth *1[56] *$$' ${XFCONFIG}; \ + then \ + ${ECHO} ""; \ + ${ECHO} "Found something."; \ + else \ + ${ECHO} "Nope, nothing found - please use"; \ + ${ECHO} ""; \ + ${ECHO} " DefaultColorDepth 16"; \ + ${ECHO} ""; \ + ${ECHO} "or"; \ + ${ECHO} ""; \ + ${ECHO} " DefaultColorDepth 15"; \ + ${ECHO} ""; \ + ${ECHO} "in your ${XFCONFIG} file with your RIVA card!"; \ + fi +.endif + @${ECHO} "=> Checking for Section \"Module\" in ${XFCONFIG} .." + @${ECHO} "" + @if \ + ${GREP} -A2 '^ *Section *"Module" *$$' ${XFCONFIG} | \ + ${GREP} -B1 -A1 '^ *Load *"glx\.so" *$$' | \ + ${GREP} -B2 '^ *EndSection *$$' | \ + ${GREP} -A2 '^ *Section *"Module" *$$'; \ + then \ + ${ECHO} ""; \ + ${ECHO} "Looks OK to me."; \ + else \ + ${ECHO} "Nope, not found - please add"; \ + ${ECHO} ""; \ + ${ECHO} " Section \"Module\""; \ + ${ECHO} " Load \"glx.so\""; \ + ${ECHO} " EndSection"; \ + ${ECHO} ""; \ + ${ECHO} "to the end of your ${XFCONFIG} file!"; \ + fi + @${ECHO} "=> Giving last advice .." + @${CAT} ${PKGDIR}/MESSAGE + +.include diff --git a/graphics/utah-glx/distinfo b/graphics/utah-glx/distinfo new file mode 100644 index 000000000000..05f85047abac --- /dev/null +++ b/graphics/utah-glx/distinfo @@ -0,0 +1,3 @@ +MD5 (glx/glx-990802.tar.bz2) = 5b04e03339dfffca73b6a11ce64cd59e +MD5 (glx/riva-x-glx.faq.bz2) = 6c5b499db143f071c6f69ba6c43db4c4 +MD5 (glx/Mesa-3_0.diff.bz2) = 5631bc2d7a54c366e072a72e45fca6c7 diff --git a/graphics/utah-glx/pkg-comment b/graphics/utah-glx/pkg-comment new file mode 100644 index 000000000000..2183297aafc6 --- /dev/null +++ b/graphics/utah-glx/pkg-comment @@ -0,0 +1 @@ +Hardware accelerated OpenGL 3d graphics (RIVA & G200/G400) diff --git a/graphics/utah-glx/pkg-descr b/graphics/utah-glx/pkg-descr new file mode 100644 index 000000000000..a03f74f97bad --- /dev/null +++ b/graphics/utah-glx/pkg-descr @@ -0,0 +1,21 @@ +OpenGL hardware acceleration for RIVA based cards and Matrox G200. + +To bridge the time until the XFree86-4 release, this port will build a +Mesa 3.0 Graphics Library that makes use of the 3d hardware acceleration +features of nvidia's RIVA 128/128ZX and RIVA TNT/TNT2/VANTAGE based +graphics cards and the Matrox G200/G400. + +WARNING: + +Please note that this build might need a considerable amount of time. +(AMD K6/300MHz/196MB/SCSI: XFree86 3 hours, Mesa 1/2 hour, glx 10 min) + +See Jordan K Hubbard's article in the July '99 issue of + + http://www.freebsdzine.org + +for more information or visit + +WWW: http://www.freebsd.org/~3d + +Marc E E van Woerkom <3d@freebsd.org> diff --git a/graphics/utah-glx/pkg-message b/graphics/utah-glx/pkg-message new file mode 100644 index 000000000000..2054bcf326f7 --- /dev/null +++ b/graphics/utah-glx/pkg-message @@ -0,0 +1,29 @@ + +Additional Notes: +----------------- + +If you built an SVGA server with 3d hardware acceleration for a nvidia card +(RIVA 128, TNT, TNT2, TNT2 Ultra ..) please check that + +- you changed the default colour depth to 16 or 15 in your /etc/XF86Config + file (keyword: DefaultColorDepth) plus + +and (this holds for Matrox G200/G400 too) check if + +- you added to /etc/XF86Config (outside of any other section) the + following 3 lines: + + Section "Module" + Load "glx.so" + EndSection + +- you enabled System V shared memory support in your kernel + + +Things you might want to do: + +. Try out ports/x11/xscreensaver (e.g. superquadrics) as an sample OpenGL + application, +. read the article or +. have a look at the docs in X11/share/doc/riva-glx, esp the FAQ or +. visit http://www.freebsd.org/~3d diff --git a/graphics/utah-glx/pkg-plist b/graphics/utah-glx/pkg-plist new file mode 100644 index 000000000000..4ac032ed9a38 --- /dev/null +++ b/graphics/utah-glx/pkg-plist @@ -0,0 +1,31 @@ +include/GL/GLXproto.h +include/GL/dosmesa.h +include/GL/foomesa.h +include/GL/fxmesa.h +include/GL/ggimesa.h +include/GL/gl.h +include/GL/gl_mangle.h +include/GL/glu.h +include/GL/glu_mangle.h +include/GL/glut.h +include/GL/glx.h +include/GL/glx_mangle.h +include/GL/mglmesa.h +include/GL/osmesa.h +include/GL/osmesa3.h +include/GL/svgamesa.h +include/GL/wmesa.h +include/GL/xmesa.h +lib/libGL.a +lib/libGL.so.1 +lib/libMesaGL.a +lib/libMesaGL.so.14 +lib/libMesaGLU.a +lib/libMesaGLU.so.14 +lib/libglut.a +lib/libglut.so.3 +lib/modules/glx.so +share/doc/riva-glx/README +share/doc/riva-glx/riva-x-glx.faq.bz2 +share/doc/riva-glx/tested.html +@dirrm share/doc/riva-glx -- cgit v1.2.3