diff options
Diffstat (limited to 'www/squid31/Makefile')
| -rw-r--r-- | www/squid31/Makefile | 481 |
1 files changed, 0 insertions, 481 deletions
diff --git a/www/squid31/Makefile b/www/squid31/Makefile deleted file mode 100644 index f1d21105325b..000000000000 --- a/www/squid31/Makefile +++ /dev/null @@ -1,481 +0,0 @@ -# New ports collection makefile for: squid24 -# Date created: Tue Mar 27 14:56:08 CEST 2001 -# Whom: Adrian Chadd <adrian@FreeBSD.org> -# -# $FreeBSD$ -# -# Tunables not (yet) configurable via 'make config': -# SQUID_{U,G}ID -# Which user/group squid should run as (default: squid/squid). -# The user and group will be created if they do not already exist using -# a uid:gid of 100:100. -# NOTE: before version 2.5.4_6, these settings defaulted to -# nobody/nogroup. -# If you wish to keep these settings, please define SQUID_UID=nobody and -# SQUID_GID=nogroup in your make environment before you start the update. -# NOTE2: -# Before version 2.5.4_11 the numerical id chosen for SQUID_UID (and -# SQUID_GID respectively) was the first free id greater than or equal 3128. -# If you wish to move your squid user to id 100:100, run "make changeuser", -# please see the changeuser target's definition for further information. -# SQUID_LANGUAGES -# A list of languages for which error page files should be installed -# (default: all) -# -# E.g. use `make SQUID_LANGUAGES="English French"' if you want to -# install the files for these languages only. -# Use `make -VSQUID_LANGUAGES' or scroll down to this variable's -# definition to see which values are valid. -# -# SQUID_DEFAULT_LANG -# If you define SQUID_LANGUAGES, select which language should be the default -# one (this variable defaults to English). This setting can be overwritten -# with squid.conf's error_directory directive. -# -# SQUID_CONFIGURE_ARGS -# Additional configuration options. -# -# To enable them, use e.g -# `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install' -# -# The list below may be incomplete, please see the configure script -# in the squid source distribution for the complete list of additional -# options. -# Note that you probably do not need to worry about these options in most -# cases, they are included in case you want to experiment with them. -# -# --enable-dlmalloc -# Compile and use the malloc package from Doug Lea -# --enable-gnuregex -# Compile and use the supplied GNUregex routines instead of BSD regex. -# --enable-xmalloc-statistics -# Show malloc statistics in status page -# --enable-time-hack -# Optimize time updates to one per second rather than calling gettimeofday() -# --enable-cachemgr-hostname=some.hostname -# Set an explicit hostname in cachemgr.cgi -# --enable-truncate -# Use truncate() rather than unlink() -# --disable-unlinkd -# Do not use "unlinkd" -# --with-aufs-threads=N_THREADS -# Tune the number of worker threads for the aufs object -# --with-coss-membuf-size -# COSS membuf size (default: 1048576 bytes) -# --with-maxfd=N -# Override the maximum number of filedescriptors. Useful if you -# build as another user who is not privileged to use the amount -# of filedescriptors the resulting binary is expected to support. -# --enable-ntlm-fail-open -# Enable NTLM fail open, where a helper that fails one of the -# Authentication steps can allow squid to still authenticate the user -# - -PORTNAME= squid -PORTVERSION= 2.5.14 -PORTREVISION= 2 -CATEGORIES= www -MASTER_SITES= \ - ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \ - ftp://archive.progeny.com/squid/%SUBDIR%/ \ - ftp://mirrors.24-7-solutions.net/pub/squid/%SUBDIR%/ \ - ftp://sunsite.auc.dk/pub/infosystems/squid/%SUBDIR%/ \ - ftp://ftp.nl.uu.net/pub/unix/www/squid/%SUBDIR%/ \ - ftp://ftp.mirrorservice.org/sites/ftp.squid-cache.org/pub/%SUBDIR%/ \ - ftp://ftp.ntua.gr/pub/www/Squid/%SUBDIR%/ \ - ftp://ftp.ccs.neu.edu/pub/mirrors/squid.nlanr.net/pub/%SUBDIR%/ \ - ${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid/&,} -MASTER_SITE_SUBDIR= squid-2/STABLE -DISTNAME= squid-2.5.STABLE14 -DIST_SUBDIR= squid2.5 - -PATCH_SITES= http://www.squid-cache.org/%SUBDIR%/ \ - http://www2.us.squid-cache.org/%SUBDIR%/ \ - http://www3.us.squid-cache.org/%SUBDIR%/ \ - http://www1.at.squid-cache.org/%SUBDIR%/ \ - http://www1.nl.squid-cache.org/%SUBDIR%/ \ - http://www1.ru.squid-cache.org/%SUBDIR%/ \ - http://www1.uk.squid-cache.org/%SUBDIR%/ \ - http://www1.gr.squid-cache.org/%SUBDIR%/ \ - http://www1.jp.squid-cache.org/%SUBDIR%/ \ - http://www1.tw.squid-cache.org/%SUBDIR%/ -PATCH_SITE_SUBDIR= Versions/v2/2.5/bugs -PATCHFILES= squid-2.5.STABLE14-httpReplyDestroy.patch \ - squid-2.5.STABLE14-hierarchy_tag.patch -PATCH_DIST_STRIP= -p1 - -MAINTAINER= tmseck@netcologne.de -COMMENT= The successful WWW proxy cache and accelerator - -CONFLICTS= squid-2.[^5]* -GNU_CONFIGURE= yes -USE_BZIP2= yes -USE_PERL5= yes - -SQUID_UID?= squid -SQUID_GID?= squid - -MAN8= cachemgr.cgi.8 squid.8 -docs= QUICKSTART README RELEASENOTES.html doc/debug-sections.txt -PORTDOCS= ${docs:T} -SUB_FILES+= pkg-deinstall pkg-install pkg-message -SUB_LIST+= SQUID_UID=${SQUID_UID} SQUID_GID=${SQUID_GID} - -OPTIONS= SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \ - SQUID_SASL_AUTH "Install SASL authentication helpers" off \ - SQUID_DELAY_POOLS "Enable delay pools" off \ - SQUID_SNMP "Enable SNMP support" off \ - SQUID_CARP "Enable CARP support" off \ - SQUID_SSL "Enable SSL support for reverse proxies" off \ - SQUID_PINGER "Install the icmp helper" off \ - SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \ - SQUID_HTCP "Enable HTCP support" off \ - SQUID_VIA_DB "Enable forward/via database" off \ - SQUID_CACHE_DIGESTS "Enable cache digests" off \ - SQUID_WCCP "Enable Web Cache Coordination Protocol" on \ - SQUID_UNDERSCORES "Allow underscores in hostnames" on \ - SQUID_CHECK_HOSTNAME "Do hostname checking" on \ - SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \ - SQUID_IDENT "Enable ident (RFC 931) lookups" on \ - SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \ - SQUID_CUSTOM_LOG "Enable custom log format" off \ - SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \ - SQUID_PF "Enable transparent proxying with PF" off \ - SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \ - SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \ - SQUID_ICAP "Enable ICAP client functionality" off \ - SQUID_AUFS "Enable the aufs storage scheme" off \ - SQUID_COSS "Enable the COSS storage scheme" off \ - SQUID_LARGEFILE "Support log and cache files >2GB" off \ - SQUID_STACKTRACES "Create backtraces on fatal errors" off \ - SQUID_RCNG "Install an rc.d style startup script" on - -etc_files= squid/cachemgr.conf.default \ - squid/mib.txt squid/mime.conf.default \ - squid/msntauth.conf.default squid/squid.conf.default - -icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \ - anthony-box2.gif anthony-c.gif anthony-compressed.gif \ - anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \ - anthony-f.gif anthony-image.gif anthony-image2.gif \ - anthony-layout.gif anthony-link.gif anthony-movie.gif \ - anthony-pdf.gif anthony-portal.gif anthony-ps.gif \ - anthony-quill.gif anthony-script.gif anthony-sound.gif \ - anthony-tar.gif anthony-tex.gif anthony-text.gif \ - anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif - -error_files= ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \ - ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \ - ERR_CONNECT_FAIL ERR_DNS_FAIL ERR_FORWARDING_DENIED \ - ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \ - ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \ - ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \ - ERR_INVALID_REQ ERR_INVALID_RESP ERR_INVALID_URL \ - ERR_LIFETIME_EXP ERR_NO_RELAY ERR_ONLY_IF_CACHED_MISS \ - ERR_READ_ERROR ERR_READ_TIMEOUT ERR_SHUTTING_DOWN \ - ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \ - ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT - -libexec= cachemgr.cgi digest_pw_auth diskd ip_user_check \ - msnt_auth ncsa_auth ntlm_auth \ - pam_auth smb_auth smb_auth.sh squid_unix_group \ - wb_auth wb_group wb_ntlmauth wbinfo_group.pl -.if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == "" -libexec+= unlinkd -.endif - -sbin= RunAccel RunCache squidclient squid - -CONFIGURE_ARGS= --bindir=${PREFIX}/sbin --sysconfdir=${PREFIX}/etc/squid \ - --datadir=${PREFIX}/etc/squid \ - --libexecdir=${PREFIX}/libexec/squid \ - --localstatedir=${PREFIX}/squid \ - --enable-removal-policies="lru heap" - -.include <bsd.port.pre.mk> - -# Authentication methods and modules: - -basic_auth= NCSA PAM MSNT SMB winbind -external_acl= ip_user unix_group wbinfo_group winbind_group -MAN8+= pam_auth.8 squid_unix_group.8 -.if defined(WITH_SQUID_LDAP_AUTH) -USE_OPENLDAP= yes -CFLAGS+= -I${LOCALBASE}/include -LDFLAGS+= -L${LOCALBASE}/lib -MAN8+= squid_ldap_auth.8 squid_ldap_group.8 -basic_auth+= LDAP -external_acl+= ldap_group -libexec+= squid_ldap_auth squid_ldap_group -.endif -.if defined(WITH_SQUID_SASL_AUTH) -LIB_DEPENDS+= sasl2.2:${PORTSDIR}/security/cyrus-sasl2 -CFLAGS+= -I${LOCALBASE}/include -CPPFLAGS+= -I${LOCALBASE}/include -LDFLAGS+= -L${LOCALBASE}/lib -basic_auth+= SASL -libexec+= sasl_auth -.endif -.if !defined(NO_NIS) && !defined(WITHOUT_NIS) -basic_auth+= YP -libexec+= yp_auth -.endif -CONFIGURE_ARGS+= --enable-auth="basic ntlm digest" \ - --enable-basic-auth-helpers="${basic_auth}" \ - --enable-digest-auth-helpers="password" \ - --enable-external-acl-helpers="${external_acl}" \ - --enable-ntlm-auth-helpers="SMB winbind" - -# Selection of storage schemes: - -storage_schemes= ufs diskd null -.if defined(WITH_SQUID_AUFS) -storage_schemes+= aufs -# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS -CONFIGURE_ARGS+= --enable-async-io \ - --with-pthreads -CFLAGS+= ${PTHREAD_CFLAGS} -.endif -.if defined(WITH_SQUID_COSS) -storage_schemes+= coss -CONFIGURE_ARGS+= --with-aio -.endif -CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}" - -# Other options set via 'make config': - -.if defined(WITH_SQUID_DELAY_POOLS) -CONFIGURE_ARGS+= --enable-delay-pools -.endif -.if defined(WITH_SQUID_SNMP) -CONFIGURE_ARGS+= --enable-snmp -.endif -.if defined(WITH_SQUID_CARP) -CONFIGURE_ARGS+= --enable-carp -.endif -.if defined(WITH_SQUID_SSL) -# we need to .include bsd.openssl.mk manually here because USE_OPENSSL only -# works when it is defined before bsd.port{.pre}.mk is .included and this is -# not possible when using OPTIONS -.include "${PORTSDIR}/Mk/bsd.openssl.mk" -CONFIGURE_ARGS+= --enable-ssl \ - --with-openssl="${OPENSSLBASE}" -CFLAGS+= -I${OPENSSLINC} -LDFLAGS+= -I${LOCALBASE}/lib -.endif -.if defined(WITH_SQUID_PINGER) -CONFIGURE_ARGS+= --enable-icmp -libexec+= pinger -.endif -.if defined(WITH_SQUID_DNS_HELPER) -CONFIGURE_ARGS+= --disable-internal-dns -libexec+= dnsserver -.endif -.if defined(WITH_SQUID_HTCP) -CONFIGURE_ARGS+= --enable-htcp -.endif -.if defined(WITH_SQUID_VIA_DB) -CONFIGURE_ARGS+= --enable-forw-via-db -.endif -.if defined(WITH_SQUID_CACHE_DIGESTS) -CONFIGURE_ARGS+= --enable-cache-digests -.endif -.if defined(WITHOUT_SQUID_WCCP) -CONFIGURE_ARGS+= --disable-wccp -.endif -.if !defined(WITHOUT_SQUID_UNDERSCORES) -CONFIGURE_ARGS+= --enable-underscores -.endif -.if defined(WITHOUT_SQUID_CHECK_HOSTNAME) -CONFIGURE_ARGS+= --disable-hostname-checks -.endif -.if defined(WITH_SQUID_STRICT_HTTP) -CONFIGURE_ARGS+= --disable-http-violations -.endif -.if defined(WITHOUT_SQUID_IDENT) -CONFIGURE_ARGS+= --disable-ident-lookups -.endif -.if defined(WITH_SQUID_USERAGENT_LOG) -CONFIGURE_ARGS+= --enable-useragent-log -.endif -.if defined(WITH_SQUID_CUSTOM_LOG) -EXTRA_PATCHES+= ${PATCHDIR}/customlog-2.5.patch -.endif -.if defined(WITH_SQUID_ARP_ACL) -CONFIGURE_ARGS+= --enable-arp-acl -.endif -.if defined(WITH_SQUID_PF) -CONFIGURE_ARGS+= --enable-pf-transparent -.if ${OSVERSION} < 502106 -IGNORE= pf available only in FreeBSD 5.3 and newer -.endif -.endif -# IPFilter-headers are not installed on FreeBSD 4 since 4.7-RELEASE, -# they were not installed on FreeBSD 5 from 2002-03-26 (OSVERSION > 500032) to -# 2003-06-27 (OSVERSION < 501101). -# -# Please see PR misc/44148 and the CVS log of src/include/Makefile for further -# information. -.if defined(WITH_SQUID_IPFILTER) -.if (${OSVERSION} >= 470000 && ${OSVERSION} < 500000) || (${OSVERSION} > 500032 && ${OSVERSION} < 501101) -IGNORE= IPFilter headers are not part of the base system -.else -CONFIGURE_ARGS+= --enable-ipf-transparent -.endif -.endif -.if defined(WITH_SQUID_FOLLOW_XFF) -EXTRA_PATCHES+= ${PATCHDIR}/follow_xff-2.5.patch \ - ${PATCHDIR}/follow_xff-configure.patch -CONFIGURE_ARGS+= --enable-follow-x-forwarded-for -.endif -.if defined(WITH_SQUID_ICAP) -EXTRA_PATCHES+= ${PATCHDIR}/icap-2.5-core.patch \ - ${PATCHDIR}/icap-2.5-bootstrap.patch -CONFIGURE_ARGS+= --enable-icap-support -error_files+= ERR_ICAP_FAILURE -.endif -.if defined(WITH_SQUID_LARGEFILE) -CONFIGURE_ARGS+= --with-large-files --enable-large-cache-files -.endif -.if defined(WITH_SQUID_STACKTRACES) -CONFIGURE_ARGS+= --enable-stacktraces -CFLAGS+= -g -STRIP= "" -.endif -.if !defined(WITHOUT_SQUID_RCNG) -USE_RC_SUBR= squid.sh -rc_del= rcold -rc_state= rcng -.else -SUB_FILES+= squid.sh -etc_files+= rc.d/squid.sh -rc_del= rcng -rc_state= rcold -.endif - -# Languages: -# -# If you do not define SQUID_LANGUAGES yourself, all available language files -# will be installed; the default language will be English. - -SQUID_LANGUAGES?= \ - Azerbaijani Bulgarian Catalan Czech Danish Dutch English Estonian Finnish \ - French German Greek Hebrew Hungarian Italian Japanese Korean Lithuanian \ - Polish Portuguese Romanian Russian-1251 Russian-koi8-r Serbian \ - Simplify_Chinese Slovak Spanish Swedish Traditional_Chinese Turkish -SQUID_DEFAULT_LANG?= English -CONFIGURE_ARGS+= --enable-err-languages="${SQUID_LANGUAGES}" \ - --enable-default-err-language=${SQUID_DEFAULT_LANG} - -# Finally, add additional user specified configuration options: -CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS} - -CONFIGURE_ENV+= CFLAGS="${CFLAGS}" \ - CPPFLAGS="${CPPFLAGS}"\ - LDFLAGS="${LDFLAGS}" - -PLIST_DIRS= etc/squid/icons libexec/squid -PLIST_FILES= ${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \ - ${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,} - -.for d in ${SQUID_LANGUAGES} -PLIST_DIRS+= etc/squid/errors/${d} -PLIST_FILES+= ${error_files:S,^,etc/squid/errors/${d}/,} -.endfor -PLIST_DIRS+= etc/squid/errors etc/squid squid/logs squid/cache squid - -post-patch: - @${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS}|g' ${WRKSRC}/configure - @${REINPLACE_CMD} -e 's|%%SQUID_UID%%|${SQUID_UID}|g' \ - -e 's|%%SQUID_GID%%|${SQUID_GID}|g' ${WRKSRC}/src/cf.data.pre - @${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \ - ${WRKSRC}/helpers/basic_auth/SMB/Makefile.in \ - ${WRKSRC}/helpers/basic_auth/SMB/smb_auth.sh - -pre-install: -# Prevent installation of .orig files by deleting them. - @${FIND} ${WRKSRC} -name '*.bak' -delete - @${FIND} ${WRKSRC} -name '*.orig' -delete -# create the start script: - @${REINPLACE_CMD} \ - -e '/--begin ${rc_del}/,/--end ${rc_del}/d' \ - -e '/--.*${rc_state}/d' ${WRKDIR}/squid.sh -# create variable information in pkg-message: - @${REINPLACE_CMD} \ - -e '/--begin ${rc_del}/,/--end ${rc_del}/d' \ - -e '/--.*${rc_state}/d' ${PKGMESSAGE} - -pre-su-install: - @${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \ - ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL - -post-install: -# Create cachemgr.conf.default manually since squid's install routine -# unfortunately fails to do so: - ${INSTALL_DATA} ${WRKSRC}/src/cachemgr.conf \ - ${PREFIX}/etc/squid/cachemgr.conf.default -.if defined(WITH_SQUID_PINGER) - ${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \ - ${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger -.endif -.if defined(WITHOUT_SQUID_RCNG) - ${INSTALL_SCRIPT} ${WRKDIR}/squid.sh ${PREFIX}/etc/rc.d/ -.endif -.if !defined(NOPORTDOCS) - @${MKDIR} ${DOCSDIR} - cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR} -.endif - @${SETENV} PKG_PREFIX=${PREFIX} \ - ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL - - @${ECHO_CMD} "===> post-installation information for ${PKGNAME}:" - @${ECHO_CMD} "" - @${CAT} ${PKGMESSAGE} - @${ECHO_CMD} "" -changeuser: -# Recover from the problem that earlier versions of this port created the -# squid pseudo-user with an id greater than 999 which is not allowed in -# FreeBSD's ports system. The port now uses id 100:100. -# NOTE: -# This target assumes that SQUID_GID is the primary group of SQUID_UID. If you -# have a different setup, do not run this target! -.if ${SQUID_UID:L} == nobody - @${ECHO_CMD} "'nobody' is a system user, you do not need to execute"; \ - ${ECHO_CMD} "this target!" - ${FALSE} -.endif - @if [ `${ID} -u` -ne 0 ]; \ - then ${ECHO_CMD} "Sorry, you must be root to use this target."; ${FALSE}; fi; \ - current_uid=`id -u ${SQUID_UID}`; \ - current_gid=`pw groupshow ${SQUID_GID}|cut -f 3 -d :`; \ - ${ECHO_CMD} "I will remove this user:"; \ - ${ID} -P $${current_uid}; \ - ${ECHO_CMD} "and this group:"; \ - pw groupshow ${SQUID_GID}; \ - ${ECHO_CMD} "I will then re-create them with a user and group id of 100."; \ - ${ECHO_CMD} "Then all files and directories under ${PREFIX} and /var that"; \ - ${ECHO_CMD} "are owned by uid $${current_uid} will be chown(1)'ed."; \ - ${ECHO_CMD} "After that, all files and directories that were accessible"; \ - ${ECHO_CMD} "by group $${current_gid} will chgrp(1)'ed respectively."; \ - ${ECHO_CMD} "Note that this assumes group '${SQUID_GID}' to be the primary"; \ - ${ECHO_CMD} "group of user '${SQUID_UID}'. If you have a different setup"; \ - ${ECHO_CMD} "please abort this target now."; \ - read -p "Press RETURN to continue or CTRL-C to abort:" dummy ; \ - ${ECHO_CMD} "OK, here we go:"; \ - ${ECHO_CMD} "deleting user $${current_uid} and his primary group..."; \ - pw userdel -u $${current_uid}; \ - ${ECHO_CMD} "adding user ${SQUID_UID} with id 100..."; \ - pw groupadd -n ${SQUID_GID} -g 100; \ - pw useradd -n ${SQUID_UID} -u 100 -c "squid caching-proxy pseudo user" \ - -d ${PREFIX}/squid -s /sbin/nologin -h - ; \ - ${ECHO_CMD} "chown(1)'ing everything under ${PREFIX} from $${current_uid} to 100..."; \ - ${FIND} -H ${PREFIX} -user $${current_uid} -exec ${CHOWN} 100 {} \; ; \ - ${ECHO_CMD} "chgrp(1)'ing everything under ${PREFIX} from $${current_gid} to 100..."; \ - ${FIND} -H ${PREFIX} -group $${current_gid} -exec ${CHOWN} :100 {} \; ; \ - ${ECHO_CMD} "chown(1)'ing everything under /var from $${current_uid} to 100..."; \ - ${FIND} -H /var -user $${current_uid} -exec ${CHOWN} 100 {} \; ; \ - ${ECHO_CMD} "chgrp(1)'ing everything under /var from $${current_gid} to 100..."; \ - ${FIND} -H /var -group $${current_gid} -exec ${CHOWN} :100 {} \; ; \ - ${ECHO_CMD} "Finished." - -.include <bsd.port.post.mk> |