diff options
Diffstat (limited to 'www/squid27/Makefile')
-rw-r--r-- | www/squid27/Makefile | 432 |
1 files changed, 0 insertions, 432 deletions
diff --git a/www/squid27/Makefile b/www/squid27/Makefile deleted file mode 100644 index 6e8f2fb54dcb..000000000000 --- a/www/squid27/Makefile +++ /dev/null @@ -1,432 +0,0 @@ -# New ports collection makefile for: squid24 -# Date created: Tue Mar 27 14:56:08 CEST 2001 -# Whom: Adrian Chadd <adrian@FreeBSD.org> -# -# $FreeBSD$ -# -# Tunables not (yet) configurable via 'make config': -# SQUID_{U,G}ID -# Which user/group squid should run as (default: squid/squid). -# The user and group will be created if they do not already exist using -# a uid:gid of 100:100. -# NOTE: before version 2.5.4_6, these settings defaulted to -# nobody/nogroup. -# If you wish to keep these settings, please define SQUID_UID=nobody and -# SQUID_GID=nogroup in your make environment before you start the update. -# NOTE2: -# Before version 2.5.4_11 the numerical id chosen for SQUID_UID (and -# SQUID_GID respectively) was the first free id greater than or equal 3128. -# If you wish to move your squid user to id 100:100, run "make changeuser", -# please see the changeuser target's definition for further information. -# SQUID_LANGUAGES -# A list of languages for which error page files should be installed -# (default: all) -# -# E.g. use `make SQUID_LANGUAGES="English French"' if you want to -# install the files for these languages only. -# Use `make -VSQUID_LANGUAGES' or scroll down to this variable's -# definition to see which values are valid. -# -# SQUID_DEFAULT_LANG -# If you define SQUID_LANGUAGES, select which language should be the default -# one (this variable defaults to English). This setting can be overwritten -# with squid.conf's error_directory directive. -# -# SQUID_CONFIGURE_ARGS -# Additional configuration options. -# -# To enable them, use e.g -# `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install' -# -# The list below may be incomplete, please see the configure script -# in the squid source distribution for the complete list of additional -# options. -# Note that you probably do not need to worry about these options in most -# cases, they are included in case you want to experiment with them. -# -# --enable-dlmalloc -# Compile and use the malloc package from Doug Lea -# --enable-gnuregex -# Compile and use the supplied GNUregex routines instead of BSD regex. -# --enable-xmalloc-statistics -# Show malloc statistics in status page -# --enable-time-hack -# Optimize time updates to one per second rather than calling gettimeofday() -# --enable-cachemgr-hostname=some.hostname -# Set an explicit hostname in cachemgr.cgi -# --enable-truncate -# Use truncate() rather than unlink() -# --disable-unlinkd -# Do not use "unlinkd" -# --with-aufs-threads=N_THREADS -# Tune the number of worker threads for the aufs object -# --with-coss-membuf-size -# COSS membuf size (default: 1048576 bytes) -# -# This option does not work on FreeBSD at the moment: -# -# --enable-ipf-transparent -# Enable Transparent Proxy support for IP-Filter systems (incl 3.0) -# (IPFilter headers are not currently installed to the base system, -# PRs ports/60700 and misc/44148 describe the problem; see -# http://www.squid-cache.org/Doc/FAQ/FAQ-17.html for information -# about how to do transparent proxying with ipfw) - -PORTNAME= squid -PORTVERSION= 2.5.7 -PORTREVISION= 5 -CATEGORIES= www -MASTER_SITES= \ - ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \ - ftp://ftp.unimelb.edu.au/pub/cwis/servers/unix/squid/%SUBDIR%/ \ - ftp://sunsite.auc.dk/pub/infosystems/squid/%SUBDIR%/ \ - ftp://ftp.leo.org/pub/comp/general/infosys/www/servers/squid/%SUBDIR%/ \ - ${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid/&,} -MASTER_SITE_SUBDIR= squid-2/STABLE -DISTNAME= squid-2.5.STABLE7 -DIST_SUBDIR= squid2.5 - -PATCH_SITES= http://www.squid-cache.org/Versions/v2/2.5/bugs/ -PATCHFILES= squid-2.5.STABLE7-half_closed_POST.patch \ - squid-2.5.STABLE7-LDAP_version_documentation.patch \ - squid-2.5.STABLE7_req_resp_header.patch \ - squid-2.5.STABLE7-helper_shutdown.patch \ - squid-2.5.STABLE7-blank_response.patch \ - squid-2.5.STABLE7-dothost.patch \ - squid-2.5.STABLE7-httpd_accel_vport.patch \ - squid-2.5.STABLE7-cachemgr_vmobjects.patch \ - squid-2.5.STABLE7-empty_acls.patch -PATCH_DIST_STRIP= -p1 - -MAINTAINER= tmseck@netcologne.de -COMMENT= The successful WWW proxy cache and accelerator - -CONFLICTS= squid-2.[^5]* -GNU_CONFIGURE= yes -USE_BZIP2= yes -USE_PERL5= yes -USE_REINPLACE= yes - -SQUID_UID?= squid -SQUID_GID?= squid - -MAN8= squid.8 -docs= QUICKSTART README RELEASENOTES.html doc/debug-sections.txt -.if !defined(NOPORTDOCS) -PORTDOCS= ${docs:T} -.endif - -OPTIONS= SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \ - SQUID_DELAY_POOLS "Enable delay pools" off \ - SQUID_SNMP "Enable SNMP support" off \ - SQUID_CARP "Enable CARP support" off \ - SQUID_SSL "Enable SSL support for reverse proxies" off \ - SQUID_PINGER "Install the icmp helper" off \ - SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \ - SQUID_HTCP "Enable HTCP support" off \ - SQUID_VIA_DB "Enable forward/via database" off \ - SQUID_CACHE_DIGESTS "Enable cache digests" off \ - SQUID_WCCP "Enable Web Cache Coordination Protocol" on \ - SQUID_UNDERSCORES "Allow underscores in hostnames" on \ - SQUID_CHECK_HOSTNAME "Do hostname checking" on \ - SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \ - SQUID_IDENT "Enable ident (RFC 931) lookups" on \ - SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \ - SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \ - SQUID_PF "Enable transp. proxy support using PF" off \ - SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \ - SQUID_AUFS "Enable the aufs storage scheme" off \ - SQUID_COSS "Enable the COSS storage scheme" off \ - SQUID_STACKTRACES "Create backtraces on fatal errors" off \ - SQUID_RCNG "Install an rcNG startup script" on - -PLIST_FILES= etc/rc.d/squid.sh etc/squid/mib.txt etc/squid/mime.conf.default \ - etc/squid/msntauth.conf.default etc/squid/squid.conf.default \ - sbin/RunAccel sbin/RunCache sbin/squidclient sbin/squid - -icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \ - anthony-box2.gif anthony-c.gif anthony-compressed.gif \ - anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \ - anthony-f.gif anthony-image.gif anthony-image2.gif \ - anthony-layout.gif anthony-link.gif anthony-movie.gif \ - anthony-pdf.gif anthony-portal.gif anthony-ps.gif \ - anthony-quill.gif anthony-script.gif anthony-sound.gif \ - anthony-tar.gif anthony-tex.gif anthony-text.gif \ - anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif - -error_files= ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \ - ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \ - ERR_CONNECT_FAIL ERR_DNS_FAIL ERR_FORWARDING_DENIED \ - ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \ - ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \ - ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED \ - ERR_FTP_UNAVAILABLE ERR_INVALID_REQ ERR_INVALID_URL \ - ERR_LIFETIME_EXP ERR_NO_RELAY ERR_ONLY_IF_CACHED_MISS \ - ERR_READ_ERROR ERR_READ_TIMEOUT ERR_SHUTTING_DOWN \ - ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \ - ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT - -libexec= cachemgr.cgi digest_pw_auth diskd dnsserver ip_user_check \ - squid_ldap_auth squid_ldap_group msnt_auth ncsa_auth ntlm_auth \ - pam_auth pinger smb_auth smb_auth.sh squid_unix_group \ - unlinkd wb_auth wb_group wb_ntlmauth wbinfo_group.pl yp_auth - -CONFIGURE_ARGS= --bindir=${PREFIX}/sbin --sysconfdir=${PREFIX}/etc/squid \ - --datadir=${PREFIX}/etc/squid \ - --libexecdir=${PREFIX}/libexec/squid \ - --localstatedir=${PREFIX}/squid \ - --enable-removal-policies="lru heap" - -.include <bsd.port.pre.mk> - -# Authentication methods and modules: - -basic_auth= NCSA PAM YP MSNT SMB winbind -external_acl= ip_user unix_group wbinfo_group winbind_group -MAN8+= pam_auth.8 squid_unix_group.8 -.if defined(WITH_SQUID_LDAP_AUTH) -USE_OPENLDAP= yes -CFLAGS+= -I${LOCALBASE}/include -LDFLAGS+= -L${LOCALBASE}/lib -MAN8+= squid_ldap_auth.8 squid_ldap_group.8 -basic_auth+= LDAP -external_acl+= ldap_group -.endif -CONFIGURE_ARGS+= --enable-auth="basic ntlm digest" \ - --enable-basic-auth-helpers="${basic_auth}" \ - --enable-digest-auth-helpers="password" \ - --enable-external-acl-helpers="${external_acl}" \ - --enable-ntlm-auth-helpers="SMB winbind" - -# Selection of storage schemes: - -storage_schemes= ufs diskd null -.if defined(WITH_SQUID_AUFS) -storage_schemes+= aufs -# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS -CONFIGURE_ARGS+= --enable-async-io \ - --with-pthreads -CFLAGS+= ${PTHREAD_CFLAGS} -.endif -.if defined(WITH_SQUID_COSS) -storage_schemes+= coss -CONFIGURE_ARGS+= --with-aio -.endif -CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}" - -# Other options set via 'make config': - -.if defined(WITH_SQUID_DELAY_POOLS) -CONFIGURE_ARGS+= --enable-delay-pools -.endif -.if defined(WITH_SQUID_SNMP) -CONFIGURE_ARGS+= --enable-snmp -.endif -.if defined(WITH_SQUID_CARP) -CONFIGURE_ARGS+= --enable-carp -.endif -.if defined(WITH_SQUID_SSL) -# we need to .include bsd.openssl.mk manually here because USE_OPENSSL only -# works when it is defined before bsd.port{.pre}.mk is .included and this is -# not possible when using OPTIONS -.include "${PORTSDIR}/Mk/bsd.openssl.mk" -CONFIGURE_ARGS+= --enable-ssl \ - --with-openssl="${OPENSSLBASE}" -CFLAGS+= -I${OPENSSLINC} -LDFLAGS+= -I${LOCALBASE}/lib -.endif -.if defined(WITH_SQUID_PINGER) -CONFIGURE_ARGS+= --enable-icmp -.endif -.if defined(WITH_SQUID_DNS_HELPER) -CONFIGURE_ARGS+= --disable-internal-dns -.endif -.if defined(WITH_SQUID_HTCP) -CONFIGURE_ARGS+= --enable-htcp -.endif -.if defined(WITH_SQUID_VIA_DB) -CONFIGURE_ARGS+= --enable-forw-via-db -.endif -.if defined(WITH_SQUID_CACHE_DIGESTS) -CONFIGURE_ARGS+= --enable-cache-digests -.endif -.if defined(WITHOUT_SQUID_WCCP) -CONFIGURE_ARGS+= --disable-wccp -.endif -.if !defined(WITHOUT_SQUID_UNDERSCORES) -CONFIGURE_ARGS+= --enable-underscores -.endif -.if defined(WITHOUT_SQUID_CHECK_HOSTNAME) -CONFIGURE_ARGS+= --disable-hostname-checks -.endif -.if defined(WITH_SQUID_STRICT_HTTP) -CONFIGURE_ARGS+= --disable-http-violations -.endif -.if defined(WITHOUT_SQUID_IDENT) -CONFIGURE_ARGS+= --disable-ident-lookups -.endif -.if defined(WITH_SQUID_USERAGENT_LOG) -CONFIGURE_ARGS+= --enable-useragent-log -.endif -.if defined(WITH_SQUID_ARP_ACL) -CONFIGURE_ARGS+= --enable-arp-acl -.endif -.if defined(WITH_SQUID_PF) -CONFIGURE_ARGS+= --enable-pf-transparent -.if ${OSVERSION} < 502106 -pf_includedir= ${LOCALBASE}/include/pf -BUILD_DEPENDS+= ${pf_includedir}/net/pfvar.h:${PORTSDIR}/security/pf -CFLAGS+= -I${pf_includedir} -EXTRA_PATCHES+= ${WRKDIR}/pf_from_ports.patch -.endif -.endif -.if defined(WITH_SQUID_FOLLOW_XFF) -EXTRA_PATCHES+= ${PATCHDIR}/follow_xff-2.5.patch \ - ${PATCHDIR}/follow_xff-configure.patch -CONFIGURE_ARGS+= --enable-follow-x-forwarded-for -.endif -.if defined(WITH_SQUID_STACKTRACES) -CONFIGURE_ARGS+= --enable-stacktraces -STRIP= "" -.endif -.if !defined(WITHOUT_SQUID_RCNG) -USE_RC_SUBR= yes -rc_del= rcold -rc_state= rcng -.else -rc_del= rcng -rc_state= rcold -.endif - -# Languages: -# -# If you do not define SQUID_LANGUAGES yourself, all available language files -# will be installed; the default language will be English. - -SQUID_LANGUAGES?= \ - Bulgarian Catalan Czech Danish Dutch English Estonian Finnish \ - French German Hebrew Hungarian Italian Japanese Korean Lithuanian \ - Polish Portuguese Romanian Russian-1251 Russian-koi8-r Serbian \ - Simplify_Chinese Slovak Spanish Swedish Traditional_Chinese Turkish -SQUID_DEFAULT_LANG?= English -CONFIGURE_ARGS+= --enable-err-languages="${SQUID_LANGUAGES}" \ - --enable-default-err-language=${SQUID_DEFAULT_LANG} - -# Finally, add additional user specified configuration options: -CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS} - -CONFIGURE_ENV+= CFLAGS="${CFLAGS}" \ - LDFLAGS="${LDFLAGS}" - -pre-patch: -# Check whether we need to create the extra patch that makes pf(4) -# visible to squid's configure script: -.if defined(pf_includedir) - @${SED} -e 's|%%PF_INCLUDEDIR%%|${pf_includedir}|g' \ - -e 's|%%PF_AC_INCLUDEPATH%%|${pf_includedir:S,/,_,g}|g' \ - ${PATCHDIR}/pf_from_ports.patch.in >${WRKDIR}/pf_from_ports.patch -.endif - -post-patch: - @${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS}|g' ${WRKSRC}/configure - @${REINPLACE_CMD} -e 's|/etc|${PREFIX}/etc|g' ${WRKSRC}/doc/squid.8 - @${REINPLACE_CMD} -e 's|%%SQUID_UID%%|${SQUID_UID}|g' \ - -e 's|%%SQUID_GID%%|${SQUID_GID}|g' ${WRKSRC}/src/cf.data.pre - -pre-install: -# Prevent installation of .orig files by deleting them. - @${FIND} ${WRKSRC} -name '*.bak' -delete - @${FIND} ${WRKSRC} -name '*.orig' -delete -# create an rcOld/rcNG squid.sh: - @${SED} -e 's|%%PREFIX%%|${PREFIX}|g' \ - -e 's|%%SQUID_UID%%|${SQUID_UID}|g' \ - -e 's|%%RC_SUBR%%|${RC_SUBR}|g' \ - -e '/--begin ${rc_del}/,/--end ${rc_del}/d' \ - -e '/--.*${rc_state}/d' ${FILESDIR}/squid.sh \ - >${WRKDIR}/squid.sh - -pre-su-install: - @${SETENV} squid_user=${SQUID_UID} squid_group=${SQUID_GID} \ - PKG_PREFIX=${PREFIX} ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL - -post-install: -.if defined(WITH_SQUID_PINGER) - ${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \ - ${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger -.endif - ${INSTALL_SCRIPT} ${WRKDIR}/squid.sh ${PREFIX}/etc/rc.d -.if !defined(NOPORTDOCS) - @${MKDIR} ${DOCSDIR} - cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR} -.endif - @${SETENV} PKG_PREFIX=${PREFIX} \ - ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL -# Create package list: - @for f in ${libexec}; do \ - ${TEST} -f ${PREFIX}/libexec/squid/$${f} && \ - ${ECHO_CMD} "libexec/squid/$${f}" >>${TMPPLIST} || ${TRUE} ; \ - done - @${ECHO_CMD} "@unexec rmdir %D/libexec/squid 2>/dev/null || true" \ - >>${TMPPLIST} - @for f in ${icon_files}; do \ - ${ECHO_CMD} "etc/squid/icons/$${f}" >>${TMPPLIST}; \ - done - @${ECHO_CMD} "@unexec rmdir %D/etc/squid/icons 2>/dev/null || true" \ - >>${TMPPLIST} - @for d in ${SQUID_LANGUAGES}; do \ - for f in ${error_files}; do \ - ${ECHO_CMD} "etc/squid/errors/$${d}/$${f}" >>${TMPPLIST} ; \ - done; \ - ${ECHO_CMD} "@unexec rmdir %D/etc/squid/errors/$${d} 2>/dev/null || true" \ - >>${TMPPLIST}; \ - done - @${ECHO_CMD} "@unexec rmdir %D/etc/squid/errors 2>/dev/null || true" \ - >>${TMPPLIST} - -changeuser: -# Recover from the problem that earlier versions of this port created the -# squid pseudo-user with an id greater than 999 which is not allowed in -# FreeBSD's ports system. The port now uses id 100:100. -# NOTE: -# This target assumes that SQUID_GID is the primary group of SQUID_UID. If you -# have a different setup, do not run this target! -.if ${SQUID_UID:L} == nobody - @${ECHO_CMD} "'nobody' is a system user, you do not need to execute"; \ - ${ECHO_CMD} "this target!" - ${FALSE} -.endif - @if [ `${ID} -u` -ne 0 ]; \ - then ${ECHO_CMD} "Sorry, you must be root to use this target."; ${FALSE}; fi; \ - current_uid=`id -u ${SQUID_UID}`; \ - current_gid=`pw groupshow ${SQUID_GID}|cut -f 3 -d :`; \ - ${ECHO_CMD} "I will remove this user:"; \ - ${ID} -P $${current_uid}; \ - ${ECHO_CMD} "and this group:"; \ - pw groupshow ${SQUID_GID}; \ - ${ECHO_CMD} "I will then re-create them with a user and group id of 100."; \ - ${ECHO_CMD} "Then all files and directories under ${PREFIX} and /var that"; \ - ${ECHO_CMD} "are owned by uid $${current_uid} will be chown(1)'ed."; \ - ${ECHO_CMD} "After that, all files and directories that were accessible"; \ - ${ECHO_CMD} "by group $${current_gid} will chgrp(1)'ed respectively."; \ - ${ECHO_CMD} "Note that this assumes group '${SQUID_GID}' to be the primary"; \ - ${ECHO_CMD} "group of user '${SQUID_UID}'. If you have a different setup"; \ - ${ECHO_CMD} "please abort this target now."; \ - read -p "Press RETURN to continue or CTRL-C to abort:" dummy ; \ - ${ECHO_CMD} "OK, here we go:"; \ - ${ECHO_CMD} "deleting user $${current_uid} and his primary group..."; \ - pw userdel -u $${current_uid}; \ - ${ECHO_CMD} "adding user ${SQUID_UID} with id 100..."; \ - pw groupadd -n ${SQUID_GID} -g 100; \ - pw useradd -n ${SQUID_UID} -u 100 -c "squid caching-proxy pseudo user" \ - -d ${PREFIX}/squid -s /sbin/nologin -h - ; \ - ${ECHO_CMD} "chown(1)'ing everything under ${PREFIX} from $${current_uid} to 100..."; \ - ${FIND} -H ${PREFIX} -user $${current_uid} -exec ${CHOWN} 100 {} \; ; \ - ${ECHO_CMD} "chgrp(1)'ing everything under ${PREFIX} from $${current_gid} to 100..."; \ - ${FIND} -H ${PREFIX} -group $${current_gid} -exec ${CHOWN} :100 {} \; ; \ - ${ECHO_CMD} "chown(1)'ing everything under /var from $${current_uid} to 100..."; \ - ${FIND} -H /var -user $${current_uid} -exec ${CHOWN} 100 {} \; ; \ - ${ECHO_CMD} "chgrp(1)'ing everything under /var from $${current_gid} to 100..."; \ - ${FIND} -H /var -group $${current_gid} -exec ${CHOWN} :100 {} \; ; \ - ${ECHO_CMD} "Finished." - -.include <bsd.port.post.mk> |