diff options
Diffstat (limited to 'security/openvpn-devel')
| -rw-r--r-- | security/openvpn-devel/Makefile | 119 | ||||
| -rw-r--r-- | security/openvpn-devel/distinfo | 3 | ||||
| -rw-r--r-- | security/openvpn-devel/files/openvpn.sh.in | 129 | ||||
| -rw-r--r-- | security/openvpn-devel/files/pkg-message.in | 12 | ||||
| -rw-r--r-- | security/openvpn-devel/files/pkg-req.in | 29 | ||||
| -rw-r--r-- | security/openvpn-devel/pkg-descr | 13 | ||||
| -rw-r--r-- | security/openvpn-devel/pkg-plist | 79 |
7 files changed, 384 insertions, 0 deletions
diff --git a/security/openvpn-devel/Makefile b/security/openvpn-devel/Makefile new file mode 100644 index 000000000000..8a0308391886 --- /dev/null +++ b/security/openvpn-devel/Makefile @@ -0,0 +1,119 @@ +# New ports collection makefile for: openvpn +# Date created: 2010-02-19 +# Whom: Eric F Crist <ecrist@secure-computing.net> +# +# $FreeBSD$ +# + +PORTNAME= openvpn +DISTVERSION= 201007 +CATEGORIES= security net +MASTER_SITES= ftp://ftp.secure-computing.net/pub/FreeBSD/ports/openvpn-devel/ \ + ftp://ftp2.secure-computing.net/pub/FreeBSD/ports/openvpn-devel/ +PKGNAMESUFFIX= -devel + +MAINTAINER= ecrist@secure-computing.net +COMMENT= Secure IP/Ethernet tunnel daemon + +WRKSRC= ${WRKDIR}/${PORTNAME}${PKGNAMESUFFIX} + +CONFLICTS= openvpn-[0-9]* + +GNU_CONFIGURE= yes +USE_OPENSSL= yes +CONFIGURE_ARGS= --with-lzo-lib=${LOCALBASE}/lib \ + --with-lzo-headers=${LOCALBASE}/include +INSTALL_TARGET= install mandir=${MANPREFIX}/man + +MAN8= openvpn.8 + +OPTIONS= PW_SAVE "Interactive passwords may be read from a file" off \ + PKCS11 "Use security/pkcs11-helper" off + +USE_RC_SUBR= openvpn.sh +USE_LDCONFIG= ${PREFIX}/lib + +SUB_FILES= pkg-message pkg-req +SUB_LIST+= OSVERSION=${OSVERSION} + +.include <bsd.port.pre.mk> + +SUB_LIST+= RCSFX=${RC_SUBR_SUFFIX} + +.ifdef (LOG_OPENVPN) +CFLAGS+= -DLOG_OPENVPN=${LOG_OPENVPN} +.endif + +pre-fetch: +.ifdef (LOG_OPENVPN) + @${ECHO} "Building with LOG_OPENVPN=${LOG_OPENVPN}" +.else + @${ECHO} "" + @${ECHO} "You may use the following build options:" + @${ECHO} "" + @${ECHO} " LOG_OPENVPN={Valid syslog facility}" + @${ECHO} " EXAMPLE: make LOG_OPENVPN=LOG_DAEMON" + @${ECHO} "" +.endif + +# NOTE: there is no way to explicitly specify the LZO version to OpenVPN, +# if LZO2 and LZO1 are installed, OpenVPN will pick LZO2. +# So depend on LZO1 only if it's already there and LZO2 isn't. +# PACKAGE_BUILDING will also force LZO2. +.if exists(${LOCALBASE}/lib/liblzo2.so.2) || !exists(${LOCALBASE}/lib/liblzo.so.1) || defined(PACKAGE_BUILDING) +LIB_DEPENDS+= lzo2.2:${PORTSDIR}/archivers/lzo2 +.else +LIB_DEPENDS+= lzo.1:${PORTSDIR}/archivers/lzo +.endif + +.if defined(WITH_PW_SAVE) +CONFIGURE_ARGS+= --enable-password-save +.endif + +.if defined(WITH_PKCS11) +LIB_DEPENDS+= pkcs11-helper.1:${PORTSDIR}/security/pkcs11-helper +.else +CONFIGURE_ARGS+= --disable-pkcs11 +.endif + +post-patch: + @${FIND} ${WRKSRC} -name \*.orig -delete + @${FIND} ${WRKSRC} -name \*.bak -delete + +post-build: + cd ${WRKSRC}/plugin/down-root && ${MAKE} + cd ${WRKSRC}/plugin/auth-pam && ${CC} ${CPPFLAGS} -I../.. -DDLOPEN_PAM=0 ${CFLAGS} -fPIC -shared -Wl,-soname,openvpn-auth-pam.so -o openvpn-auth-pam.so auth-pam.c pamdl.c -lc -lpam + @# self-tests here +.if !defined(WITHOUT_CHECK) + cd ${WRKSRC} && ${MAKE} check +.endif + +pre-install: + PKG_PREFIX=${PREFIX} ${SH} ${PKGREQ} ${PKGNAME} INSTALL + +post-install: + ${MKDIR} ${PREFIX}/lib + ${INSTALL_PROGRAM} ${WRKSRC}/plugin/down-root/openvpn-down-root.so ${PREFIX}/lib/ + ${INSTALL_PROGRAM} ${WRKSRC}/plugin/auth-pam/openvpn-auth-pam.so ${PREFIX}/lib/ +.if !defined(NOPORTDOCS) + ${MKDIR} ${DOCSDIR} + ${INSTALL_DATA} ${WRKSRC}/plugin/down-root/README ${DOCSDIR}/README.openvpn-down-root + ${INSTALL_DATA} ${WRKSRC}/plugin/auth-pam/README ${DOCSDIR}/README.openvpn-auth-pam +.for docs in AUTHORS COPYING COPYRIGHT.GPL ChangeLog INSTALL \ + PORTS README + ${INSTALL_DATA} ${WRKSRC}/${docs} ${DOCSDIR}/ +.endfor +.for dir in easy-rsa easy-rsa/1.0 easy-rsa/2.0 sample-config-files + ${MKDIR} ${DOCSDIR}/${dir} + ${FIND} ${WRKSRC}/${dir}/ -maxdepth 1 -type f -exec ${INSTALL_DATA} \{\} ${DOCSDIR}/${dir} \; +.endfor +.for dir in sample-scripts + ${MKDIR} ${DOCSDIR}/${dir} + ${FIND} ${WRKSRC}/${dir}/ -maxdepth 1 -type f -exec ${INSTALL_SCRIPT} \{\} ${DOCSDIR}/${dir} \; +.endfor +.else + -@${RMDIR} ${DOCSDIR} +.endif + @${CAT} ${PKGMESSAGE} + +.include <bsd.port.post.mk> diff --git a/security/openvpn-devel/distinfo b/security/openvpn-devel/distinfo new file mode 100644 index 000000000000..d47c18e5daf3 --- /dev/null +++ b/security/openvpn-devel/distinfo @@ -0,0 +1,3 @@ +MD5 (openvpn-201007.tar.gz) = b8eba6e56e90442c03a133d7a3a3378f +SHA256 (openvpn-201007.tar.gz) = 0294d3a0c002a25553b8353aadcb3b54907c078502223828d34c23271b16112a +SIZE (openvpn-201007.tar.gz) = 1015619 diff --git a/security/openvpn-devel/files/openvpn.sh.in b/security/openvpn-devel/files/openvpn.sh.in new file mode 100644 index 000000000000..ca66486c06ab --- /dev/null +++ b/security/openvpn-devel/files/openvpn.sh.in @@ -0,0 +1,129 @@ +#!/bin/sh +# +# openvpn.sh - load tun/tap driver and start OpenVPN daemon +# +# (C) Copyright 2005 - 2008 by Matthias Andree +# based on suggestions by Matthias Grimm and Dirk Gouders +# with multi-instance contribution from Denis Shaposhnikov, Gleb Kozyrev +# and Vasil Dimov +# +# $FreeBSD$ +# +# This program is free software; you can redistribute it and/or modify it under +# the terms of the GNU General Public License as published by the Free Software +# Foundation; either version 2 of the License, or (at your option) any later +# version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more +# details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., 51 Franklin +# Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# PROVIDE: openvpn +# REQUIRE: DAEMON +# KEYWORD: shutdown + +# ----------------------------------------------------------------------------- +# +# This script supports running multiple instances of openvpn. +# To run additional instance link this script to something like +# % ln -s openvpn openvpn_foo +# and define additional openvpn_foo_* variables in one of +# /etc/rc.conf, /etc/rc.conf.local or /etc/rc.conf.d/openvpn_foo +# +# Below NAME should be substituted with the name of this script. By default +# it is openvpn, so read as openvpn_enable. If you linked the script to +# openvpn_foo, then read as openvpn_foo_enable etc. +# +# The following variables are supported (defaults are shown). +# You can place them in any of +# /etc/rc.conf, /etc/rc.conf.local or /etc/rc.conf.d/NAME +# +# NAME_enable="NO" # set to YES to enable openvpn +# NAME_if="" # driver(s) to load, set to "tun", "tap" or "tun tap" +# +# # optional: +# NAME_flags="" # additional command line arguments +# NAME_configfile="%%PREFIX%%/etc/openvpn/NAME.conf" # --config file +# NAME_dir="%%PREFIX%%/etc/openvpn" # --cd directory +# +# You also need to set NAME_configfile and NAME_dir, if the configuration +# file and directory where keys and certificates reside differ from the above +# settings. +# +# Note that we deliberately refrain from unloading drivers. +# +# For further documentation, please see openvpn(8). +# + +. %%RC_SUBR%% + +case "$0" in +/etc/rc*) + # during boot (shutdown) $0 is /etc/rc (/etc/rc.shutdown), + # so get the name of the script from $_file + name=$(basename "$_file" .sh) + ;; +*) + name=$(basename "$0" .sh) + ;; +esac + +rcvar=$(set_rcvar) + +openvpn_precmd() +{ + for i in $interfaces ; do + # FreeBSD <= 5.4 does not know kldstat's -m option + # FreeBSD >= 6.0 does not add debug.* sysctl information + # in the default build - we check both to keep things simple + if ! sysctl debug.if_${i}_debug >/dev/null 2>&1 \ + && ! kldstat -m if_${i} >/dev/null 2>&1 ; then + if ! kldload if_${i} ; then + warn "Could not load $i module." + return 1 + fi + fi + done + return 0 +} + +stop_postcmd() +{ + rm -f "$pidfile" || warn "Could not remove $pidfile." +} + +# support SIGHUP to reparse configuration file +extra_commands="reload" + +# pidfile +pidfile="/var/run/${name}.pid" + +# command and arguments +command="%%PREFIX%%/sbin/openvpn" + +# run this first +start_precmd="openvpn_precmd" +# and this last +stop_postcmd="stop_postcmd" + +load_rc_config ${name} + +eval ": \${${name}_enable:=\"NO\"}" +eval ": \${${name}_flags:=\"\"}" +eval ": \${${name}_if:=\"\"}" +eval ": \${${name}_configfile:=\"%%PREFIX%%/etc/openvpn/${name}.conf\"}" +eval ": \${${name}_dir:=\"%%PREFIX%%/etc/openvpn\"}" + +configfile="$(eval echo \${${name}_configfile})" +dir="$(eval echo \${${name}_dir})" +interfaces="$(eval echo \${${name}_if})" + +required_files=${configfile} +command_args="--cd ${dir} --daemon ${name} --config ${configfile} --writepid ${pidfile}" + +run_rc_command "$1" diff --git a/security/openvpn-devel/files/pkg-message.in b/security/openvpn-devel/files/pkg-message.in new file mode 100644 index 000000000000..5abc9aad90e0 --- /dev/null +++ b/security/openvpn-devel/files/pkg-message.in @@ -0,0 +1,12 @@ +### ------------------------------------------------------------------------ +### Edit /etc/rc.conf[.local] to start OpenVPN automatically at system +### startup. See %%PREFIX%%/etc/rc.d/openvpn%%RCSFX%% for details. +### ------------------------------------------------------------------------ +### For compatibility notes when interoperating with older OpenVPN +### versions, please, see <http://openvpn.net/relnotes.html> +### ------------------------------------------------------------------------ +### If you want to donate to OpenVPN: <http://openvpn.net/donate.html> +### ------------------------------------------------------------------------ +### NOTE THIS IS AN UNSTABLE VERSION UNDER DEVELOPMENT! +### It may or may not be suitable for production. Use at your own risk. +### ------------------------------------------------------------------------ diff --git a/security/openvpn-devel/files/pkg-req.in b/security/openvpn-devel/files/pkg-req.in new file mode 100644 index 000000000000..15c8242d8724 --- /dev/null +++ b/security/openvpn-devel/files/pkg-req.in @@ -0,0 +1,29 @@ +set -e + +rcvers() { + # determine if we have "old" or "new" (rcorder integration) scheme + # for %%PREFIX%%/etc/rc.d/* files + if test $1 -ge 700007 || test $1 -lt 700000 -a $1 -ge 600101 ; then + echo 2 + else + echo 1 + fi +} + +if [ "$2" = INSTALL ] ; then + # check if the base system is new enough for us, + # which should only matter for package installs. + buildrc=$(rcvers %%OSVERSION%%) + execrc=$(rcvers $(sysctl -n kern.osreldate) ) + if test $buildrc -gt $execrc ; then + cat <<EOF + +Error: this package, $1, was compiled for a newer FreeBSD +====== version that uses different boot scripts. + Therefore, the rc.d script WILL NOT WORK. + Please update your ports tree and install security/openvpn from there. + +EOF + exit 1 + fi +fi diff --git a/security/openvpn-devel/pkg-descr b/security/openvpn-devel/pkg-descr new file mode 100644 index 000000000000..6c45b3e18a45 --- /dev/null +++ b/security/openvpn-devel/pkg-descr @@ -0,0 +1,13 @@ +OpenVPN is a robust, scalable and highly configurable VPN (Virtual Private +Network) daemon which can be used to securely link two or more private networks +using an encrypted tunnel over the internet. It can operate over UDP or TCP, +can use SSL or a pre-shared secret to authenticate peers, and in SSL mode, one +server can handle many clients. + +This development port is updated frequently and is likely NOT STABLE. This is +an untested tar of the source tree. We attempt to omit inoperable states, but +there is a good chance this program will not run. + +DO NOT USE IN PRODUCTION WITHOUT CAUTION + +WWW: http://openvpn.net/ diff --git a/security/openvpn-devel/pkg-plist b/security/openvpn-devel/pkg-plist new file mode 100644 index 000000000000..dbec65c3f248 --- /dev/null +++ b/security/openvpn-devel/pkg-plist @@ -0,0 +1,79 @@ +sbin/openvpn +lib/openvpn-auth-pam.so +lib/openvpn-down-root.so +%%PORTDOCS%%%%DOCSDIR%%/AUTHORS +%%PORTDOCS%%%%DOCSDIR%%/COPYING +%%PORTDOCS%%%%DOCSDIR%%/COPYRIGHT.GPL +%%PORTDOCS%%%%DOCSDIR%%/ChangeLog +%%PORTDOCS%%%%DOCSDIR%%/INSTALL +%%PORTDOCS%%%%DOCSDIR%%/PORTS +%%PORTDOCS%%%%DOCSDIR%%/README +%%PORTDOCS%%%%DOCSDIR%%/README.openvpn-auth-pam +%%PORTDOCS%%%%DOCSDIR%%/README.openvpn-down-root +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/README +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-ca +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-dh +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-inter +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-key +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-key-pass +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-key-pkcs12 +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-key-server +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-req +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-req-pass +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/clean-all +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/list-crl +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/make-crl +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/openssl.cnf +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/revoke-crt +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/revoke-full +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/sign-req +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/vars +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/Makefile +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/README +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-ca +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-dh +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-inter +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-key +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-key-pass +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-key-pkcs12 +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-key-server +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-req +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-req-pass +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/clean-all +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/inherit-inter +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/list-crl +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/openssl-0.9.6.cnf +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/openssl.cnf +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/pkitool +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/revoke-full +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/sign-req +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/vars +%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/whichopensslcnf +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/README +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/client.conf +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/firewall.sh +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/home.up +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/loopback-client +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/loopback-server +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/office.up +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/openvpn-shutdown.sh +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/openvpn-startup.sh +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/server.conf +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/static-home.conf +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/static-office.conf +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/tls-home.conf +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/tls-office.conf +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/xinetd-client-config +%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/xinetd-server-config +%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/auth-pam.pl +%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/bridge-start +%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/bridge-stop +%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/openvpn.init +%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/ucn.pl +%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/verify-cn +%%PORTDOCS%%@dirrm %%DOCSDIR%%/sample-scripts +%%PORTDOCS%%@dirrm %%DOCSDIR%%/sample-config-files +%%PORTDOCS%%@dirrm %%DOCSDIR%%/easy-rsa/2.0 +%%PORTDOCS%%@dirrm %%DOCSDIR%%/easy-rsa/1.0 +%%PORTDOCS%%@dirrm %%DOCSDIR%%/easy-rsa +%%PORTDOCS%%@dirrm %%DOCSDIR%% |