diff options
Diffstat (limited to 'print/ghostscript8/Makefile')
| -rw-r--r-- | print/ghostscript8/Makefile | 299 |
1 files changed, 0 insertions, 299 deletions
diff --git a/print/ghostscript8/Makefile b/print/ghostscript8/Makefile deleted file mode 100644 index 4eddddc11929..000000000000 --- a/print/ghostscript8/Makefile +++ /dev/null @@ -1,299 +0,0 @@ -# New ports collection makefile for: ghostscript -# Date created: Tue Jun 10 21:58:54 CEST 1997 -# Whom: Andreas Klemm <andreas@klemm.gtn.com> -# -# $FreeBSD$ -# - -PORTNAME= ghostscript -PORTVERSION= ${GS_VERSION} -PORTREVISION= ${GS_REVISION} -PORTEPOCH= ${GS_EPOCH} -CATEGORIES= print -MASTER_SITES= ${MASTER_SITE_SOURCEFORGE:S/$/:gs_srcs/} \ - http://www.humblesoft.com/pub/:epag \ - ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/GPL/gs${GS_VERSION:S/.//}/:gs_srcs -MASTER_SITE_SUBDIR= ghostscript/:gs_srcs -PKGNAMESUFFIX= -gpl -DISTFILES= ${GS_SRCS}:gs_srcs \ - ${EPAG_SRCS}:epag -DIST_SUBDIR= ghostscript -EXTRACT_ONLY= ${GS_SRCS} - -MAINTAINER= ports@FreeBSD.org -COMMENT= GPL Postscript interpreter - -LIB_DEPENDS= jpeg.9:${PORTSDIR}/graphics/jpeg \ - png.5:${PORTSDIR}/graphics/png -RUN_DEPENDS= ${LOCALBASE}/share/ghostscript/fonts/a010013l.pfb:${PORTSDIR}/print/gsfonts - -CONFLICTS= ghostscript-gnu* -USE_BZIP2= yes -USE_GMAKE= yes -MAKE_ENV= CC="${CC}" CXX="${CXX}" CFLAGS_STANDARD="${CFLAGS}" \ - XCFLAGS="${XCFLAGS}" XLDFLAGS="${XLDFLAGS}" \ - EXTRALIBS="${EXTRALIBS}" -PLIST_SUB= GS_VERSION="${GS_VERSION}" \ - CIDFONTDIR="${CIDFONTDIR}" - -SCRIPTS_ENV= GS_DRIVERS_LIST="${GS_DRIVERS_LIST}" \ - WITHOUT_X11="${WITHOUT_X11}" \ - WITH_SVGALIB="${WITH_SVGALIB}" \ - WITH_ICONV="${WITH_ICONV}" - -MAN1= dvipdf.1 font2c.1 gs.1 gslp.1 gsnd.1 gs-pcl3.1 pcl3opts.1 \ - pdf2dsc.1 pdf2ps.1 pdfopt.1 pf2afm.1 pfbtopfa.1 printafm.1 \ - ps2ascii.1 ps2epsi.1 ps2pdf.1 ps2pdfwr.1 ps2ps.1 wftopfa.1 -MLINKS= gslp.1 gsbj.1 \ - gslp.1 gsdj.1 \ - gslp.1 gsdj500.1 \ - gslp.1 gslj.1 \ - ps2pdf.1 ps2pdf12.1 \ - ps2pdf.1 ps2pdf13.1 \ - ps2ps.1 eps2eps.1 - -XCFLAGS= ${PTHREAD_CFLAGS} -XLDFLAGS= ${PTHREAD_LIBS} - -MSG_PAPERSIZE= "NOTE: Type \"make A4=yes\" to use A4 paper size by default." -.if !defined(WITH_LETTERSIZE) -.if defined(A4) || defined(WITH_A4SIZE) -XCFLAGS+= -DA4 -MSG_PAPERSIZE= "NOTE: Default paper size will be A4." -.endif -.endif - -.if defined(WITHOUT_X11) -PKGNAMESUFFIX:= ${PKGNAMESUFFIX}-nox11 -.else -USE_XORG= xt xext -.endif - -.if defined(WITH_SVGALIB) -LIB_DEPENDS+= vga.1:${PORTSDIR}/graphics/svgalib -.endif - -.if defined(WITH_ICONV) -USE_ICONV= yes -EXTRALIBS+= -liconv -.endif - -.if defined(WITH_FONTCONFIG) -LIB_DEPENDS+= fontconfig.1:${PORTSDIR}/x11-fonts/fontconfig -XCFLAGS+= -DHAVE_FONTCONFIG=1 -EXTRALIBS+= -lfontconfig -.endif - -.if defined(WITH_FT_BRIDGE) -BUILD_DEPENDS+= ${LOCALBASE}/lib/libfreetype.a:${PORTSDIR}/print/freetype2 -MAKE_ENV+= FT_BRIDGE=1 FT_ROOT="${WRKSRC}/freetype" FT_LIB_EXT=".a" -.endif - -.if defined(WITH_SHLIB) -.if defined(WITHOUT_X11) -MAKE_ENV+= SOC_LOADER="dxmainc.c" -.else -USE_GNOME= gtk20 -MAKE_ENV+= SOC_LOADER="dxmain.c" \ - SOC_CFLAGS="`pkg-config --cflags gtk+-2.0`" \ - SOC_LIBS="`pkg-config --libs gtk+-2.0`" -.endif -ALL_TARGET= so pcl3opts -INSTALL_TARGET= soinstall -USE_LDCONFIG= yes -PLIST_SUB+= SHLIB="" SHLIB_VER="${GS_VERSION:R}" -INCLUDEDIR= ${PREFIX}/include/ghostscript -.else -ALL_TARGET= all pcl3opts -PLIST_SUB+= SHLIB="@comment " -.endif - -GS_SRCS= ${DISTNAME}${EXTRACT_SUFX} -CIDFONTDIR= ${PREFIX}/share/ghostscript/${GS_VERSION}/Resource - -# Additional Drivers: - -# EPAG - additional driver for Epson ESC/Page printers -# http://www.humblesoft.com/gdevepag.html -EPAG= epag -EPAG_VERS= 3.09 -EPAG_NAME= ${EPAG}-${EPAG_VERS} -EPAG_SRCS= ${EPAG_NAME}.tar.gz - -.include "Makefile.inc" -.include <bsd.port.pre.mk> -.SILENT: - -pre-everything:: - ${ECHO_MSG} ${MSG_PAPERSIZE} - -post-extract: - ${ECHO_MSG} ">>> in post-extract ..." -# ** 3rd party driver ** -# Note: don't forget to add those devices in scripts/configure, -# which update unix-gcc.mak to build gs with these new devices! -# -# for EPAG driver - ${ECHO_MSG} ">>> extracting ${EPAG_SRCS} ..." - ${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${EPAG_SRCS} - ${LN} -sf ${EPAG_NAME} ${WRKSRC}/${EPAG} - -post-patch: - ${REINPLACE_CMD} -e 's|^DEVICE_DEVS|#DEVICE_DEVS|g' \ - ${WRKSRC}/src/unix-gcc.mak - ${REINPLACE_CMD} -e 's|\. de|\.|g' \ - ${WRKSRC}/src/unixinst.mak -# for DMPRT driver - ${REINPLACE_CMD} -e 's|%%DATADIR%%|${DATADIR}|g ; \ - s|%%GS_VERSION%%|${GS_VERSION}|g' \ - ${WRKSRC}/contrib/japanese/dmp_site.ps - -# here we apply the modifications necessary to build the 3rd party drivers -# advantage: you see unmodified makefiles after a pure make extract -pre-configure: - ${ECHO_MSG} ">>> in pre-configure ..." -# for EPAG driver - ${ECHO_MSG} ">>> adding EPAG driver to contrib.mak ..." - ${CAT} ${FILESDIR}/epag.contrib.mak \ - >> ${WRKSRC}/src/contrib.mak - -post-configure: - ${ECHO_MSG} ">>> in post-configure ..." - cd ${WRKSRC}/jasper ; \ - ${SETENV} ${MAKE_ENV} ${SH} ./configure - -pre-build: - ${ECHO_MSG} ">>> in pre-build ..." - ${ECHO_MSG} ">>> creating directories for compilation ..." - ${MKDIR} ${WRKSRC}/obj - ${MKDIR} ${WRKSRC}/bin -# for EPAG driver - ${ECHO_MSG} ">>> building EPAG utility ..." - cd ${WRKSRC}/${EPAG_NAME} ; \ - ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} Makefile - ${ECHO_MSG} ">>> creating symlinks for EPAG ..." -.for i in gdevepag.c - ${LN} -sf ${WRKSRC}/${EPAG_NAME}/${i} ${WRKSRC}/src -.endfor -.if defined(WITH_FT_BRIDGE) - ${MKDIR} ${WRKSRC}/freetype/include - ${LN} -sf ${LOCALBASE}/include/ft2build.h \ - ${WRKSRC}/freetype/include/ft2build.h - ${LN} -sf ${LOCALBASE}/include/freetype2/freetype \ - ${WRKSRC}/freetype/include/freetype - ${MKDIR} ${WRKSRC}/freetype/objs - ${LN} -sf ${LOCALBASE}/lib/libfreetype.a \ - ${WRKSRC}/freetype/objs/freetype214MT_D.a -.endif - -pre-su-install: - ${ECHO_MSG} ">>> in pre-install ..." - ${ECHO_MSG} ">>> creating ghostscript destdir ..." - ${MKDIR} ${DATADIR} - ${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${DATADIR} -.if defined(WITH_SHLIB) - ${MKDIR} ${INCLUDEDIR} - ${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${INCLUDEDIR} -.endif - -post-install: - ${ECHO_MSG} ">>> in post-install ..." - ${LN} -s -f ${LOCALBASE}/share/fonts/CIDFont ${CIDFONTDIR}/CIDFont -.if defined(WITH_SHLIB) -.for i in iapi.h ierrors.h - ${INSTALL_DATA} ${WRKSRC}/src/${i} ${INCLUDEDIR} -.endfor -.endif - ${ECHO_MSG} ">>> stripping gs ..." -.if defined(WITH_SHLIB) - ${STRIP_CMD} ${PREFIX}/bin/gsc ${PREFIX}/bin/gsx - ${LN} -sf gsc ${PREFIX}/bin/gs -.else - ${STRIP_CMD} ${PREFIX}/bin/gs -.endif -# for PCL3 driver - ${ECHO_MSG} ">>> installing PCL3 utility in bindir ..." - ${INSTALL_PROGRAM} ${WRKSRC}/bin/pcl3opts ${PREFIX}/bin - ${ECHO_MSG} ">>> installing PCL3 manpages ..." -.for i in gs-pcl3.1 pcl3opts.1 - ${INSTALL_MAN} ${WRKSRC}/contrib/pcl3/doc/${i} ${MANPREFIX}/man/man1 -.endfor -# other pcl3 stuff, which might be interesting for runtime - ${ECHO_MSG} ">>> creating PCL3 destdir ..." - ${MKDIR} ${DATADIR}/${GS_VERSION}/pcl3 - ${ECHO_MSG} ">>> installing files in PCL3 destdir ..." -.for i in NEWS BUGS README lib/example.mcf lib/if-pcl3 ps/calign.ps \ - ps/dumppdd.ps ps/levels-test.ps ps/margins-A4.ps \ - ps/margins-A4Rotated.ps ps/margins-Env10Rotated.ps \ - ps/margins-EnvDLRotated.ps ps/margins-Letter.ps \ - ps/margins-LetterRotated.ps - ${INSTALL_DATA} ${WRKSRC}/contrib/pcl3/${i} \ - ${DATADIR}/${GS_VERSION}/pcl3 -.endfor -# for DMPRT driver - ${ECHO_MSG} ">>> installing DMPRT resources ..." -.for i in dmp_init.ps dmp_site.ps escp_24.src - ${INSTALL_DATA} ${WRKSRC}/contrib/japanese/${i} \ - ${DATADIR}/${GS_VERSION}/lib -.endfor -# for EPAG driver - ${ECHO_MSG} ">>> installing EPAG utility in bindir ..." - ${INSTALL_PROGRAM} ${WRKSRC}/${EPAG_NAME}/ert ${PREFIX}/bin -# contributed UPP driver - ${ECHO_MSG} ">>> installing contributed UPP profiles ..." - ${INSTALL_DATA} ${WRKSRC}/contrib/uniprint/*.upp \ - ${DATADIR}/${GS_VERSION}/lib -.for i in lqx70ch.upp lqx70cl.upp lqx70cm.upp - ${INSTALL_DATA} ${FILESDIR}/${i} \ - ${DATADIR}/${GS_VERSION}/lib -.endfor -# -# now NOPORTDOCS dependend stuff -# -.if !defined(NOPORTDOCS) - ${ECHO_MSG} ">>> installing PORTDOC stuff ..." - ${MKDIR} ${DOCSDIR}/${GS_VERSION}/japanese - ${INSTALL_DATA} ${WRKSRC}/contrib/japanese/doc/* \ - ${DOCSDIR}/${GS_VERSION}/japanese -# for HP2200 driver - ${MKDIR} ${DOCSDIR}/${GS_VERSION}/chp2200 -.for file in AUTHORS INSTALL - ${INSTALL_DATA} ${WRKSRC}/contrib/chp2200/${file} \ - ${DOCSDIR}/${GS_VERSION}/chp2200 -.endfor -# contributed UPP driver - ${MKDIR} ${DOCSDIR}/${GS_VERSION}/epson740 -.for file in README upp-HowTo-to-be - ${INSTALL_DATA} ${WRKSRC}/contrib/epson740/${file} \ - ${DOCSDIR}/${GS_VERSION}/epson740 -.endfor -# for LXM3200 driver - ${MKDIR} ${DOCSDIR}/${GS_VERSION}/lxm3200-tweaked - ${INSTALL_DATA} ${WRKSRC}/contrib/lxm3200-tweaked/* \ - ${DOCSDIR}/${GS_VERSION}/lxm3200-tweaked -# for MD2K driver - ${MKDIR} ${DOCSDIR}/${GS_VERSION}/md2k_md5k - ${INSTALL_DATA} ${WRKSRC}/contrib/md2k_md5k/* \ - ${DOCSDIR}/${GS_VERSION}/md2k_md5k -# for PCL3 driver - ${ECHO_MSG} ">>> installing PCL3 docs ..." - ${MKDIR} ${DOCSDIR}/${GS_VERSION}/pcl3 -.for i in NEWS doc/gs-pcl3.html doc/how-to-report.txt doc/pcl3opts.html - ${INSTALL_DATA} ${WRKSRC}/contrib/pcl3/${i} \ - ${DOCSDIR}/${GS_VERSION}/pcl3 -.endfor -# for EPAG driver - ${ECHO_MSG} ">>> installing EPAG docs ..." - ${MKDIR} ${DOCSDIR}/${GS_VERSION}/${EPAG} -.for i in ert.txt gdevepag.txt ChangeLog - ${INSTALL_DATA} ${WRKSRC}/${EPAG_NAME}/${i} \ - ${DOCSDIR}/${GS_VERSION}/${EPAG} -.endfor -.for i in psprint gsepagif.sh - ${INSTALL_SCRIPT} ${WRKSRC}/${EPAG_NAME}/${i} \ - ${DOCSDIR}/${GS_VERSION}/${EPAG} -.endfor -.endif - ${ECHO_MSG} "> post-installation tasks completed." - -.include <bsd.port.post.mk> |