diff options
Diffstat (limited to 'net/yate-devel/files/README.too')
| -rw-r--r-- | net/yate-devel/files/README.too | 161 |
1 files changed, 0 insertions, 161 deletions
diff --git a/net/yate-devel/files/README.too b/net/yate-devel/files/README.too deleted file mode 100644 index a4aae3c2e380..000000000000 --- a/net/yate-devel/files/README.too +++ /dev/null @@ -1,161 +0,0 @@ -Asterisk Open PBC/IVR Project using the Sangoma A101 and A102 cards -=================================================================== - -Alex Feldman: Aug 10 2005 -Nenad Corbic: - -WANPIPE supports the Asterisk Open PBX/IVR project through an interface -of the Zaptel family of hardware devices. These devices share a common -driver suite, called the ZAPATA Telephony Driver Suite (zaptel). - - -ASTERISK / ZAPTEL Installation -------------------------------- - -First install: - zaptel, and asterisk software on your system. - -The Zaptel module can be installed using one of the following methods: - -1. You can use ports collection or packages method of installation if you - want to install the latest stable release: - # cd /usr/ports/misc/zaptel/ - # make install - -2. You can also use nightly snapshot from sn repository - (http://www.portaone.com/~gonzo/zaptel-bsd-trunk.tar.gz). - -3. Subvestion repository: https://svn.bluezbox.repos/zaptel-bsd - svn co --username svn --password svn https://svn.bluezbox.com/repos/zaptel-bsd - -The Asterisk application can be installed from ports collection: - # cd /usr/ports/net/asterisk - # make install - - - -WANPIPE Releases ----------------- - -2.8.2-1: Latest Wanpipe Release - - o First version of Sangoma driver for FreeBSD OS that - support Asterisk/Zaptel interface (AFT-A101/A102/A104 cards Only) - - - -WANPIPE Installation for Asterisk ---------------------------------- - -1. Download the LATEST Wanpipe 2.8.2 Release or Greater! - - Note: Wanpipe does not support Asterisk in releases - LOWER than 2.8.2! - - ftp.sangoma.com/FreeBSD/current_wanpipe - - -2. Install WANPIPE package - - eg: pkg_add wanpipe-2.8.2-1.tgz - - - Proceed with default installation options. - - IMPORTANT: - Under compilation mode: select CUSTOM - - Then select: DEF :for default protocols - TDM :for TDM Voice asterisk support - - Proceed to compile wanpipe drivers. - -4. To confirm successful installation run: - - wanrouter hwprobe - - Confirm that Sangoma cards have been found. - - Note: - Zaptel kernel drivers must be compiled and installed - BEFORE loading WANPIPE drivers. - - -WANPIPE Configuration for the A100 series of cards --------------------------------------------------- - -You can use the A101/A102 or A104 cards for both data and voice. -The following describes how to configure the Asterisk system for -voice, with an auxiliary data interface, if needed. - -1. Run the configuration utility wancfg. - - /usr/sbin/wancfg - - Hardware Setup: - Select Hardware: AFT - - T1/E1 CSU/DSU Setup can be configured via - "Advanced Physical Medium Config" - - Protocol Setup: - Select Protocol: TDM VOICE - No other options - - Interface Setup: - Select: SPAN Number: 1-24 - The SPAN usually starts with 1 - - Select: Override Asterisk Echo Enable - Default: NO - - This optoin will DISABLE/Override Asterisk - ECHO Cancellation Cfg for this SPAN. - - Therefore, if you want to DISABLE Echo Cancellation - for this SPAN, ie: ignore what is configured in - zapata.conf, then set this option to YES. - - Used in switching applications where single SPAN - needs echo cancellation and rest do not. Therefore, - one would use this option to disable ECHO - cancellation on SPANS that don't need it. - - -Zaptel configuration --------------------- - -Download the documentation how to configure Zaptel driver from - -(http://www.digium.com/downloads/configuring_zaptel.pdf). - -When configuring the Zaptel driver (/etc/zaptel.conf) - - 1) Select the same span configurations as you used for WANPIPE - (i.e. LBO, framing, coding parameters). - - Otherwise the Zaptel configuration is completely - standard, except that if there are data channels that - will be handled by WANPIPE, those channels should be ignored, - and not configured as 'nethdlc'. - - 2) If you are using multiple WANPIPE devices for Asterisk - - For example, an A102 card might be configured as: - - wanpipe1 and wanpipe2 - - then you need to set your starting scripts to start - the wanpipes in the same sequence as defined in zaptel.conf. - - Run: wanrouter wanrc - - to set the wanpipe startup order. - - 3) If you are using some channels for DATA - - You don't need to set the channel list for this - interface under /etc/zaptel.conf because all data will go - through the separate WANPIPE driver to the kernel. - -------------------------------------------------------------------- |