diff options
Diffstat (limited to 'mail/exim')
-rw-r--r-- | mail/exim/Makefile | 21 | ||||
-rw-r--r-- | mail/exim/distinfo | 5 | ||||
-rw-r--r-- | mail/exim/files/Makefile | 99 | ||||
-rw-r--r-- | mail/exim/files/eximon.conf | 13 | ||||
-rw-r--r-- | mail/exim/files/patch-aa | 12 | ||||
-rw-r--r-- | mail/exim/pkg-descr | 1 | ||||
-rw-r--r-- | mail/exim/pkg-plist | 7 |
7 files changed, 110 insertions, 48 deletions
diff --git a/mail/exim/Makefile b/mail/exim/Makefile index b844be9dd884..6957671c7d91 100644 --- a/mail/exim/Makefile +++ b/mail/exim/Makefile @@ -1,24 +1,27 @@ # New ports collection makefile for: exim -# Version required: 1.60 +# Version required: 1.61 # Date created: 23 June 1996 # Whom: markm # -# $Id: Makefile,v 1.7 1996/12/01 07:12:08 markm Exp $ +# $Id: Makefile,v 1.8 1997/02/26 13:45:02 markm Exp $ # -DISTNAME= exim-1.60 +DISTNAME= exim-1.70 CATEGORIES= mail MASTER_SITES= ftp://ftp.cus.cam.ac.uk/pub/software/programs/exim/ -DISTFILES= exim-1.60.tar.gz exim-texinfo-1.60.tar.gz +DISTFILES= exim-1.70.tar.gz exim-texinfo-1.70.tar.gz + +PATCH_SITES= ftp://ftp.cus.cam.ac.uk/pub/software/programs/exim/ +PATCHFILES= exim-1.70.patches MAINTAINER= markm@FreeBSD.ORG do-configure: - ${MKDIR} ${WRKSRC}/Local - ${CP} ${FILESDIR}/Makefile ${WRKSRC}/Local - ${CP} ${FILESDIR}/eximon.conf ${WRKSRC}/Local - (cd ${WRKSRC}/doc ; \ - for i in ../../exim-texinfo-1.60/doc/* ; do \ + @${MKDIR} ${WRKSRC}/Local + @${CP} ${FILESDIR}/Makefile ${WRKSRC}/Local + @${CP} ${FILESDIR}/eximon.conf ${WRKSRC}/Local + @(cd ${WRKSRC}/doc ; \ + for i in ../../exim-texinfo-1.70/doc/* ; do \ ln -sf $$i ; \ done ) diff --git a/mail/exim/distinfo b/mail/exim/distinfo index d31932d6b3ec..8fc4e1fa4e8f 100644 --- a/mail/exim/distinfo +++ b/mail/exim/distinfo @@ -1,2 +1,3 @@ -MD5 (exim-1.60.tar.gz) = 407d501c807e88e2ee4ddb6cf50c4c8a -MD5 (exim-texinfo-1.60.tar.gz) = 46c7261ef8332700c8dfa062eaf0f552 +MD5 (exim-1.70.tar.gz) = f2c71bb01595c3d0bcd060e5b0e8910e +MD5 (exim-texinfo-1.70.tar.gz) = 47c705fa36cf7a179131c009f4ff2bd9 +MD5 (exim-1.70.patches) = b5f298db52e25b7248594e7ecf4f98be diff --git a/mail/exim/files/Makefile b/mail/exim/files/Makefile index 43498e492bda..30c94d5a832b 100644 --- a/mail/exim/files/Makefile +++ b/mail/exim/files/Makefile @@ -7,6 +7,14 @@ # be edited and then saved to a file called Local/Makefile before first running # the make command. +# Blank lines and lines starting with # are ignored. It is also permitted to +# use the # character to add a comment to a setting, for example +# +# EXIM_GID=42 # the "mail" group +# +# Consequently, it is not possible to have the # character present in any +# setting, but I can't think of any cases where this would be wanted. + # Things that depend on the operating system have default settings in files # called OS/Makefile-<osname>. These can be overridden by creating files # called Local/Makefile-<osname>. In particular, the location of the X11 @@ -16,9 +24,22 @@ # and XLFLAGS (linking flags). There are defaults in OS/Makefile-Default which # are overridden for some operating systems in the OS/Makefile-<osname> file. # If these are not right for you, put appropriate settings into a file called -# Local/Makefile-<osname>. [In all cases "<osname>" stands for the name of +# Local/Makefile-<osname>. In all cases "<osname>" stands for the name of # your operating system - look at the names in the OS directory to see which -# names are recognized.] +# names are recognized. + +# Another area of variability between systems is the type and location of the +# dbm library package. Exim has support for ndbm, gdbm, and Berkeley db. By +# default it assumes ndbm; this often works with gdbm or db, provided they +# are correctly installed, via their compatibility interfaces. However, Exim +# can also be configured to use the native calls for Berkeley db 1.85, and +# there are some locking actions that can be varied by changing the +# configuration. The defaults are set in OS/Makefile-Default, and can be +# changed by putting things into an OS-specific Makefile, or indeed into the +# main Local/Makefile if Exim is being compiled for a single OS only. + +# See also the file doc/dbm.discuss.txt for discussion about different dbm +# libraries. ############################################################################### @@ -38,6 +59,16 @@ BIN_DIRECTORY=/usr/local/sbin INFO_DIRECTORY=/usr/local/info +# The following commands live in different places in some OS. The OS-specific +# files should normally point to the right place, but they can be overridden +# here if necessary. + +# CHOWN_COMMAND=/usr/bin/chown +# CHGRP_COMMAND=/usr/bin/chgrp +# MV_COMMAND=/bin/mv +# RM_COMMAND=/bin/rm + + # The compress command is used by the exicyclog script to compress old log # files. Both the name of the command and the suffix that it adds to files # need to be defined here. See also the EXICYCLOG_MAX configuration. @@ -108,14 +139,6 @@ DIRECTOR_SMARTUSER=yes # DB_DIRECTORY_MODE=0750 -# Database locking: When trying to obtain a lock on one of its database files, -# there is a limit to the number of retries (default 10) and a time between -# retries (default 5 seconds). These can be altered here. - -# DB_LOCK_RETRIES=10 -# DB_LOCK_SLEEP=5 - - # Database file mode: The mode of files created in the "db" directory defaults # to 0640 in the source, and can be changed here. @@ -130,9 +153,9 @@ EXICYCLOG_MAX=10 # Running Exim not as root: A uid and gid for Exim can be specified here. These # are compiled into the binary, but can be changed by settings in the runtime -# configuration file. The default in the code is -1, which means "unset" - -# i.e. run as root unless specified otherwise at run time. Specifying 0 at -# run time has the effect of unsetting any configured values. +# configuration file. If EXIM_UID is not defined, the default in the code is to +# run as root unless specified otherwise at run time. Specifying 0 at +# run time has the effect of unsetting the values build into the binary. # The settings here must be numeric; the run time file allows names to # be used. When this uid and gid are set, the Exim binary still has to be @@ -140,10 +163,10 @@ EXICYCLOG_MAX=10 # 25 is to be run, but it gives up its privilege when possible. There is a # trade-off between security and efficiency, controlled by the runtime # "security" setting, which controls how privilege is released (setuid vs -# seteuid). The default value of -1 here means "unset". +# seteuid). -# EXIM_GID=-1 -# EXIM_UID=-1 +# EXIM_UID= +# EXIM_GID= # Compiling the Exim monitor: If you want to compile the Exim monitor, @@ -188,11 +211,17 @@ LOG_FILE_PATH=/var/log/exim_%slog # EXIM_GID above, then that uid and gid must be able to create files in the # directory you have specified. +# You do not have to define the log file path here; an option in the runtime +# configuration file can also set it, and that overrides any setting here. +# However, it is recommended that you set it here if it is a fixed path, so +# that it is available right from the start of Exim's execution. Otherwise, +# errors detected early on, for example errors in the configuration file, +# cannot be logged. -# If you do not set LOG_FILE_PATH, then Exim creates a directory called -# "log" inside its spool directory (see SPOOL_DIRECTORY below) and uses that -# with filenames "mainlog", "paniclog", etc. Its mode defaults to 0750 but -# that can be changed here. +# If you do not set LOG_FILE_PATH here or in the runtime configuration, Exim +# creates a directory called "log" inside its spool directory (see +# SPOOL_DIRECTORY below) and uses that with filenames "mainlog", "paniclog", +# etc. Its mode defaults to 0750 but that can be changed here. # LOG_DIRECTORY_MODE=0750 @@ -238,6 +267,10 @@ PID_FILE_PATH=/var/run/exim%s.pid # create and write to the files. If the attempt to open the file fails, Exim # just refrains from trying to write the data. +# The pid file path does not have to be set here; it can be also be set by an +# option in the runtime configuration file, which takes precedence over any +# setting here. + # Included routers: These variables determine which individual router drivers # are included in the Exim binary. There are no defaults; those that are @@ -260,17 +293,25 @@ ROUTER_QUERYPROGRAM=yes # The spool directory: This directory is where all the data for messages in # transit is kept. There is no default in the source, so its location must be -# defined in a local configuration file. Exim creates it if it does not exist, -# using the mode required for the sub-directory that it is trying to create at -# the time. If a non-root uid and gid have been defined for Exim (either in -# this configuration file, or by the runtime configuration options), then this -# directory and all sub-directories and their files will be created with their -# owners and groups set to Exim's uid and gid. - -# Many installations will want something like this +# defined in a local configuration file, or in the runtime configuration. It +# is recommended that you define it here if it is a fixed path, especially if +# you have not defined LOG_FILE_PATH. Log files are then written in a sub- +# directory of the spool directory, and it is helpful to have this defined +# right from the start of execution so that, for example, errors in reading +# the runtime configuration file can be logged. + +# Exim creates the spool directory if it does not exist, using the mode +# required for the sub-directory that it is trying to create at the time. If a +# non-root uid and gid have been defined for Exim (either in this configuration +# file, or by the runtime configuration options), then this directory and all +# sub-directories and their files will be created with their owners and groups +# set to Exim's uid and gid. + +# Many installations will want something like this: # SPOOL_DIRECTORY=/var/spool/exim -# Others may prefer to keep all Exim things under one directory +# Others may prefer to keep all Exim things under one directory: +# SPOOL_DIRECTORY=/usr/exim/spool SPOOL_DIRECTORY=/var/spool/exim diff --git a/mail/exim/files/eximon.conf b/mail/exim/files/eximon.conf index 236bfbb2b853..5f9e20dc6426 100644 --- a/mail/exim/files/eximon.conf +++ b/mail/exim/files/eximon.conf @@ -90,6 +90,11 @@ # QUEUE_INTERVAL=300 +# The size of the popup text window that is used for looking at the +# contents of messages, etc. + +# TEXT_DEPTH=200 + # The keystroke/mouse-operation that is used to pop up the menu in the # queue window is configurable. The default is Shift with the lefthand # mouse button. The name of an alternative can be specified in the standard @@ -116,6 +121,12 @@ # ACTION_QUEUE_UPDATE=yes +# When the menu item to display a message's body is invoked, the amount +# of data is limited to BODY_MAX bytes. This limit is a safety precaution +# to save the screen scrolling for ever on an enormous message. + +# BODY_MAX=20000 + # The stripcharts are updated every STRIPCHART_INTERVAL seconds. # STRIPCHART_INTERVAL=60 @@ -168,7 +179,7 @@ # LOG_STRIPCHARTS='/ <= /in/ # / => /out/ # / => .+ D=/local/ -# / => .+ T=smtp/smtp/' +# / => .+ T=[^ ]*smtp/smtp/' # The following variable may be set to the name of a disc partition. If # it is, a stripchart showing the percentage fullness of the partition diff --git a/mail/exim/files/patch-aa b/mail/exim/files/patch-aa index 123517f32a26..3fcf8c16a004 100644 --- a/mail/exim/files/patch-aa +++ b/mail/exim/files/patch-aa @@ -1,5 +1,5 @@ ---- scripts/exim_install.orig Tue Feb 25 11:12:33 1997 -+++ scripts/exim_install Wed Feb 26 15:17:09 1997 +--- scripts/exim_install.orig Thu Aug 21 16:48:58 1997 ++++ scripts/exim_install Fri Aug 29 15:22:04 1997 @@ -8,6 +8,8 @@ # This script also installs a default configuration file in CONFIGURE_FILE # if there is no configuration file there. @@ -12,9 +12,9 @@ @@ -65,10 +67,12 @@ fi - BIN_DIRECTORY=`grep -h "^ *BIN_DIRECTORY" $files | tail -1 | cut -c15-99` -+INFO_DIRECTORY=`grep -h "^ *INFO_DIRECTORY" $files | tail -1 | cut -c16-99` - CONFIGURE_FILE=`grep -h "^ *CONFIGURE_FILE" $files | tail -1 | cut -c16-99` + BIN_DIRECTORY=`grep "^ *BIN_DIRECTORY=" $files | tail -1 | cut -f2-99 -d: | cut -c15-99` ++INFO_DIRECTORY=`grep "^ *INFO_DIRECTORY=" $files | tail -1 | cut -f2-99 -d: | cut -c16-99` + CONFIGURE_FILE=`grep "^ *CONFIGURE_FILE=" $files | tail -1 | cut -f2-99 -d: | cut -c16-99` # Allow INST_xx to over-ride xx case "$INST_BIN_DIRECTORY" in ?*) BIN_DIRECTORY="$INST_BIN_DIRECTORY";; esac @@ -51,7 +51,7 @@ # If no arguments, install everything if [ $# -gt 0 ]; then -@@ -166,12 +185,30 @@ +@@ -167,12 +186,30 @@ fi done diff --git a/mail/exim/pkg-descr b/mail/exim/pkg-descr index 591d2c48a225..5ab3f4fe30b2 100644 --- a/mail/exim/pkg-descr +++ b/mail/exim/pkg-descr @@ -15,4 +15,3 @@ Exim is a mail transfer agent for Unix systems connected to the Internet. are very good. . Its requeuing and retry algorithms are very powerful. - diff --git a/mail/exim/pkg-plist b/mail/exim/pkg-plist index 15320d7afc08..b06b574934ca 100644 --- a/mail/exim/pkg-plist +++ b/mail/exim/pkg-plist @@ -11,6 +11,13 @@ sbin/exicyclog sbin/exigrep sbin/eximstats etc/exim/configure +@unexec install-info --delete %D/info/exim_overview.info %D/info/dir +@unexec install-info --delete %D/info/exim.info %D/info/dir +@unexec install-info --delete %D/info/exim_filter.info %D/info/dir info/exim_overview.info info/exim.info info/exim_filter.info +@exec [ -f %D/info/dir ] || sed -ne '1,/Menu:/p' /usr/share/info/dir > %D/info/dir +@exec install-info %D/info/exim_overview.info %D/info/dir +@exec install-info %D/info/exim.info %D/info/dir +@exec install-info %D/info/exim_filter.info %D/info/dir |