diff options
Diffstat (limited to 'Mk')
| -rw-r--r-- | Mk/bsd.port.mk | 173 | ||||
| -rw-r--r-- | Mk/bsd.port.subdir.mk | 7 |
2 files changed, 105 insertions, 75 deletions
diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk index 66dc62198f10..c523b6279104 100644 --- a/Mk/bsd.port.mk +++ b/Mk/bsd.port.mk @@ -1,7 +1,7 @@ #-*- mode: Fundamental; tab-width: 4; -*- # ex:ts=4 # -# $Id: bsd.port.mk,v 1.298 1998/11/20 04:00:38 asami Exp $ +# $Id: bsd.port.mk,v 1.299 1998/11/25 00:12:27 asami Exp $ # $NetBSD: $ # # bsd.port.mk - 940820 Jordan K. Hubbard. @@ -189,8 +189,6 @@ OpenBSD_MAINTAINER= imp@OpenBSD.ORG # unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless # NO_WRKSUBDIR is set, in which case simply ${WRKDIR}). # NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}. -# NO_WRKDIR - There's no work directory at all; port does this someplace -# else. # PATCHDIR - A directory containing any additional patches you made # to port this software to FreeBSD (default: # ${MASTERDIR}/patches) @@ -285,10 +283,10 @@ OpenBSD_MAINTAINER= imp@OpenBSD.ORG # # Set these variables if your port doesn't need some of the steps. # Note that there are no NO_PATCH or NO_CONFIGURE variables becuase -# those steps are empty by default. Also, NO_CHECKSUM is a user variable -# and is not to be set in a port's Makefile. See above for NO_PACKAGE. +# those steps are empty by default. NO_EXTRACT is not allowed anymore +# since we need to at least create ${WRKDIR}. Also, NO_CHECKSUM is a user +# variable and is not to be set in a port's Makefile. See above for NO_PACKAGE. # -# NO_EXTRACT - Use a dummy (do-nothing) extract target. # NO_BUILD - Use a dummy (do-nothing) build target. # NO_INSTALL - Use a dummy (do-nothing) install target. # @@ -389,19 +387,33 @@ OpenBSD_MAINTAINER= imp@OpenBSD.ORG .if !defined(AFTERPORTMK) # Get the architecture +.if !defined(ARCH) ARCH!= /usr/bin/uname -m +.endif # Get the operating system type +.if !defined(OPSYS) OPSYS!= /usr/bin/uname -s +.endif # Get the operating system revision +.if !defined(OSREL) OSREL!= /usr/bin/uname -r | sed -e 's/[-(].*//' +.endif # Get __FreeBSD_version -OSVERSION!= sysctl -n kern.osreldate +.if !defined(OSVERSION) +.if exists(/sbin/sysctl) +OSVERSION!= /sbin/sysctl -n kern.osreldate +.else +OSVERSION!= /usr/sbin/sysctl -n kern.osreldate +.endif +.endif # Get the object format. +.if !defined(PORTOBJFORMAT) PORTOBJFORMAT!= test -x /usr/bin/objformat && /usr/bin/objformat || echo aout +.endif MASTERDIR?= ${.CURDIR} @@ -497,11 +509,7 @@ PREFIX?= ${LOCALBASE} # Start of post-makefile section. .if !defined(BEFOREPORTMK) -.if !defined(NO_WRKDIR) WRKDIR?= ${WRKDIRPREFIX}${.CURDIR}/work -.else -WRKDIR?= ${WRKDIRPREFIX}${.CURDIR} -.endif .if defined(NO_WRKSUBDIR) WRKSRC?= ${WRKDIR} .else @@ -538,6 +546,10 @@ GNU_CONFIGURE= yes BUILD_DEPENDS+= autoconf:${PORTSDIR}/devel/autoconf .endif +#.if defined(REQUIRES_MOTIF) +#BUILD_DEPENDS+= ${X11BASE}/lib/libXm.a:${PORTSDIR}/tmp/motif +#.endif + PERL_VERSION= 5.00502 PERL_VER= 5.005 PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \ @@ -687,28 +699,36 @@ COMMENT?= ${PKGDIR}/COMMENT DESCR?= ${PKGDIR}/DESCR PLIST?= ${PKGDIR}/PLIST TMPPLIST?= ${WRKDIR}/.PLIST.mktmp +PKGINSTALL?= ${PKGDIR}/INSTALL +PKGDEINSTALL?= ${PKGDIR}/DEINSTALL +PKGREQ?= ${PKGDIR}/REQ +PKGMESSAGE?= ${PKGDIR}/MESSAGE PKG_CMD?= /usr/sbin/pkg_create PKG_DELETE?= /usr/sbin/pkg_delete .if !defined(PKG_ARGS) PKG_ARGS= -v -c ${COMMENT} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`" ${EXTRA_PKG_ARGS} -.if exists(${PKGDIR}/INSTALL) -PKG_ARGS+= -i ${PKGDIR}/INSTALL +.if exists(${PKGINSTALL}) +PKG_ARGS+= -i ${PKGINSTALL} .endif -.if exists(${PKGDIR}/DEINSTALL) -PKG_ARGS+= -k ${PKGDIR}/DEINSTALL +.if exists(${PKGDEINSTALL}) +PKG_ARGS+= -k ${PKGDEINSTALL} .endif -.if exists(${PKGDIR}/REQ) -PKG_ARGS+= -r ${PKGDIR}/REQ +.if exists(${PKGREQ}) +PKG_ARGS+= -r ${PKGREQ} .endif -.if exists(${PKGDIR}/MESSAGE) -PKG_ARGS+= -D ${PKGDIR}/MESSAGE +.if exists(${PKGMESSAGE}) +PKG_ARGS+= -D ${PKGMESSAGE} .endif .if !defined(NO_MTREE) PKG_ARGS+= -m ${MTREE_FILE} .endif .endif +.if defined(PKG_NOCOMPRESS) +PKG_SUFX?= .tar +.else PKG_SUFX?= .tgz +.endif # where pkg_add records its dirty deeds. PKG_DBDIR?= /var/db/pkg @@ -764,7 +784,14 @@ MASTER_SITE_XCONTRIB+= \ MASTER_SITE_GNU+= \ ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ \ - ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/ + ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/ \ + ftp://ftp.kddlabs.co.jp/pub/gnu/%SUBDIR%/ \ + ftp://ftp.digex.net/pub/gnu/%SUBDIR%/ \ + ftp://ftp.univ-evry.fr/pub/gnu/%SUBDIR%/ \ + ftp://ftp.cdrom.com/pub/gnu/%SUBDIR%/ \ + ftp://ftp.duke.edu/pub/gnu/%SUBDIR%/ \ + ftp://ftp.gamma.ru/pub/gnu/%SUBDIR%/ \ + ftp://ftp.nihon-u.ac.jp/pub/gnu/%SUBDIR%/ MASTER_SITE_PERL_CPAN+= \ ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ \ @@ -1046,6 +1073,10 @@ IGNORE= "does not require Motif" IGNORE= "may not be placed on a CDROM: ${NO_CDROM}" .elif (defined(RESTRICTED) && defined(NO_RESTRICTED)) IGNORE= "is restricted: ${RESTRICTED}" +.elif defined(NO_WRKDIR) +IGNORE= "defines NO_WRKDIR, which is obsoleted. If you are defining NO_WRKDIR and NO_EXTRACT, try changing it to NO_WRKSUBDIR=yes and EXTRACT_ONLY= \(the right side intentionally left empty\)" +.elif defined(NO_EXTRACT) +IGNORE= "defines NO_EXTRACT, which is obsoleted. Try changing it to EXTRACT_ONLY= \(the right side intentionally left empty\)" .elif defined(NO_CONFIGURE) IGNORE= "defines NO_CONFIGURE, which is obsoleted" .elif defined(NO_PATCH) @@ -1056,7 +1087,7 @@ IGNORE= "is broken for ELF: ${BROKEN_ELF}" IGNORE= "is marked as broken: ${BROKEN}" .endif -.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING)) +.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING) && !defined(PARALLEL_PACKAGE_BUILD)) IGNORE= "has to be built manually: ${MANUAL_PACKAGE_BUILD}" clean: @${IGNORECMD} @@ -1088,7 +1119,12 @@ reinstall: @${IGNORECMD} package: @${IGNORECMD} +ignorelist: package-name +.else +ignorelist: + @${DO_NADA} .endif + .endif ################################################################ @@ -1145,13 +1181,6 @@ checksum: fetch @${DO_NADA} .endif -# Disable extract -.if defined(NO_EXTRACT) && !target(extract) -extract: fetch - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} checksum REAL_EXTRACT=yes - @${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE} -.endif - # Disable build .if defined(NO_BUILD) && !target(build) build: configure @@ -1247,10 +1276,8 @@ do-fetch: .if !target(do-extract) do-extract: -.if !defined(NO_WRKDIR) @${RM} -rf ${WRKDIR} @${MKDIR} ${WRKDIR} -.endif @for file in ${EXTRACT_ONLY}; do \ if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\ then \ @@ -1461,7 +1488,7 @@ _PORT_USE: .USE ${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \ exit 1; \ else \ - ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/; \ + ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \ fi; \ else \ ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \ @@ -1632,7 +1659,6 @@ clean: pre-clean @${MAKE} clean-depends .endif @${ECHO_MSG} "===> Cleaning for ${PKGNAME}" -.if !defined(NO_WRKDIR) @if [ -d ${WRKDIR} ]; then \ if [ -w ${WRKDIR} ]; then \ ${RM} -rf ${WRKDIR}; \ @@ -1640,9 +1666,6 @@ clean: pre-clean ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \ fi; \ fi -.else - @${RM} -f ${WRKDIR}/.*_done ${TMPPLIST} -.endif .endif .if !target(pre-distclean) @@ -1775,19 +1798,6 @@ package-name: @${ECHO} ${PKGNAME} .endif -# Show (recursively) all the packages this package depends on. - -.if !target(package-depends) -package-depends: - @for dir in `${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ - if [ -d $$dir ]; then \ - (cd $$dir ; ${MAKE} package-name package-depends); \ - else \ - ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ - fi; \ - done -.endif - # Build a package but don't check the package cookie .if !target(repackage) @@ -1802,9 +1812,7 @@ pre-repackage: .if !target(package-noinstall) package-noinstall: -.if !defined(NO_WRKDIR) @${MKDIR} ${WRKDIR} -.endif @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package @${RM} ${TMPPLIST} -@${RMDIR} ${WRKDIR} @@ -1961,16 +1969,35 @@ clean-depends: .endif .endif -.if !target(depends-list) -depends-list: +# Dependency lists: build and runtime. Print out directory names. + +build-depends-list: @for dir in `${ECHO} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ if [ -d $$dir ]; then \ - (cd $$dir ; ${MAKE} package-name depends-list); \ + ${ECHO} $$dir; \ + else \ + ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ + fi; \ + done | sort -u + +run-depends-list: + @for dir in `${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ + if [ -d $$dir ]; then \ + ${ECHO} $$dir; \ + else \ + ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ + fi; \ + done | sort -u + +# This one does not print out directory names -- it could take a long time. +package-depends: + @for dir in `${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ + if [ -d $$dir ]; then \ + (cd $$dir ; ${MAKE} package-name package-depends); \ else \ ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ fi; \ done -.endif ################################################################ # Everything after here are internal targets and really @@ -2000,12 +2027,12 @@ describe: ${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \ case "A${FETCH_DEPENDS}B${BUILD_DEPENDS}C${LIB_DEPENDS}D${DEPENDS}E" in \ ABCDE) ;; \ - *) cd ${.CURDIR} && ${ECHO} -n `${MAKE} depends-list|sort -u`;; \ + *) cd ${.CURDIR} && ${ECHO} -n `${MAKE} build-depends-list|sort -u`;; \ esac; \ ${ECHO} -n "|"; \ case "A${RUN_DEPENDS}B${LIB_DEPENDS}C${DEPENDS}D" in \ ABCD) ;; \ - *) cd ${.CURDIR} && ${ECHO} -n `${MAKE} package-depends|sort -u`;; \ + *) cd ${.CURDIR} && ${ECHO} -n `${MAKE} run-depends-list|sort -u`;; \ esac; \ ${ECHO} "" .endif @@ -2027,25 +2054,27 @@ README.html: -e 's%%PKG%%${PKGNAME}g' \ -e '/%%COMMENT%%/r${PKGDIR}/COMMENT' \ -e '/%%COMMENT%%/d' \ - -e 's%%BUILD_DEPENDS%%'"`${MAKE} print-depends-list`"'' \ - -e 's%%RUN_DEPENDS%%'"`${MAKE} print-package-depends`"'' \ + -e 's%%BUILD_DEPENDS%%'"`${MAKE} pretty-print-build-depends-list`"'' \ + -e 's%%RUN_DEPENDS%%'"`${MAKE} pretty-print-run-depends-list`"'' \ >> $@ -.if !target(print-depends-list) -print-depends-list: +# The following two targets require an up-to-date INDEX in ${PORTSDIR} + +.if !target(pretty-print-build-depends-list) +pretty-print-build-depends-list: .if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \ defined(LIB_DEPENDS) || defined(DEPENDS) @${ECHO} -n 'This port requires package(s) "' - @${ECHO} -n `${MAKE} depends-list | sort -u` + @${ECHO} -n `grep '^${PKGNAME}|' ${PORTSDIR}/INDEX | awk -F\| '{print $$8;}'` @${ECHO} '" to build.' .endif .endif -.if !target(print-package-depends) -print-package-depends: +.if !target(pretty-print-run-depends-list) +pretty-print-run-depends-list: .if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS) @${ECHO} -n 'This port requires package(s) "' - @${ECHO} -n `${MAKE} package-depends | sort -u` + @${ECHO} -n `grep '^${PKGNAME}|' ${PORTSDIR}/INDEX | awk -F\| '{print $$9;}'` @${ECHO} '" to run.' .endif .endif @@ -2134,17 +2163,17 @@ fake-pkg: ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \ ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \ ${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \ - if [ -f ${PKGDIR}/INSTALL ]; then \ - ${CP} ${PKGDIR}/INSTALL ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \ + if [ -f ${PKGINSTALL} ]; then \ + ${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \ fi; \ - if [ -f ${PKGDIR}/DEINSTALL ]; then \ - ${CP} ${PKGDIR}/DEINSTALL ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \ + if [ -f ${PKGDEINSTALL} ]; then \ + ${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \ fi; \ - if [ -f ${PKGDIR}/REQ ]; then \ - ${CP} ${PKGDIR}/REQ ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \ + if [ -f ${PKGREQ} ]; then \ + ${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \ fi; \ - if [ -f ${PKGDIR}/MESSAGE ]; then \ - ${CP} ${PKGDIR}/MESSAGE ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \ + if [ -f ${PKGMESSAGE} ]; then \ + ${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \ fi; \ for dep in `${MAKE} package-depends ECHO_MSG=/usr/bin/true | sort -u`; do \ if [ -d ${PKG_DBDIR}/$$dep ]; then \ diff --git a/Mk/bsd.port.subdir.mk b/Mk/bsd.port.subdir.mk index 8d63b0031541..45928f87d460 100644 --- a/Mk/bsd.port.subdir.mk +++ b/Mk/bsd.port.subdir.mk @@ -1,5 +1,5 @@ # from: @(#)bsd.subdir.mk 5.9 (Berkeley) 2/1/91 -# $Id: bsd.port.subdir.mk,v 1.25 1998/10/30 08:28:02 asami Exp $ +# $Id: bsd.port.subdir.mk,v 1.26 1998/11/08 10:29:53 asami Exp $ # # The include file <bsd.port.subdir.mk> contains the default targets # for building ports subdirectories. @@ -29,7 +29,7 @@ # # afterinstall, all, beforeinstall, build, checksum, clean, # clean-for-cdrom, clean-restricted, configure, deinstall, -# depend, depends, describe, extract, fetch, fetch-list, +# depend, depends, describe, extract, fetch, fetch-list, ignorelist, # install, package, package-loop, readmes, realinstall, reinstall, tags # @@ -82,7 +82,8 @@ ${SUBDIR}:: .for __target in all fetch fetch-list package package-loop extract configure \ build clean clean-for-cdrom clean-restricted \ deinstall depend depends describe distclean \ - reinstall tags checksum + reinstall tags checksum \ + ignorelist .if !target(${__target}) ${__target}: _SUBDIRUSE .endif |