2 files changed, 0 insertions, 318 deletions
diff --git a/Mk/bsd.drupal.mk b/Mk/bsd.drupal.mk
deleted file mode 100644
index dfab8a915e6d..000000000000
--- a/Mk/bsd.drupal.mk
+++ /dev/null
@@ -1,160 +0,0 @@
-# $FreeBSD$
-#
-
-# Make sure we cannot define any combination of DRUPAL{4,5,6}
-.if (defined(DRUPAL4_MODULE) && defined(DRUPAL5_MODULE)) || (defined(DRUPAL4_MODULE) && defined(DRUPAL6_MODULE)) || (defined(DRUPAL5_MODULE) && defined(DRUPAL6_MODULE))
-BROKEN=		cannot define a combination of DRUPAL4_MODULE, DRUPAL5_MODULE and DRUPAL6_MODULE
-.endif
-
-# Make sure DRUPAL_MODULE is defined.  If no DRUPAL*_module defined, then define DRUPAL4_MODULE
-.if defined(DRUPAL4_MODULE) || defined(DRUPAL5_MODULE) || defined(DRUPAL6_MODULE)
-DRUPAL_MODULE?=	yes
-.endif
-
-.if defined(DRUPAL_MODULE)
-DRUPAL_MODTYPE=	modules
-.endif
-
-# Make sure DRUPAL_PORT is defined.  If no DRUPAL*_module defined, then define DRUPAL4_PORT
-.if defined(DRUPAL4_PORT) || defined(DRUPAL5_PORT) || defined(DRUPAL6_PORT)
-DRUPAL_PORT?=	yes
-.endif
-
-# Make sure DRUPAL_THEME is defined
-.if defined(DRUPAL5_THEME) || defined(DRUPAL6_THEME)
-DRUPAL_THEME?=	yes
-DRUPAL_MODTYPE=	themes
-.endif
-
-.if defined(DRUPAL6_MODULE) || defined(DRUPAL6_PORT) || defined(DRUPAL6_THEME)
-DRUPAL_BASE?=   www/drupal6
-.else
-.if defined(DRUPAL5_MODULE) || defined(DRUPAL5_PORT) || defined(DRUPAL5_THEME)
-DRUPAL_BASE?=	www/drupal5
-.else
-DRUPAL_BASE?=	www/drupal4
-.endif
-.endif
-
-DRUPAL_DIR=	${PREFIX}/${DRUPAL_BASE}
-DRUPAL_DOCSDIR?=	${PREFIX}/${DRUPAL_BASE}/doc
-PLIST_SUB+=	DRUPAL_BASE=${DRUPAL_BASE}
-SUB_LIST+=	DRUPAL_BASE=${DRUPAL_BASE} DRUPAL_DIR=${DRUPAL_DIR}
-
-.if defined(DRUPAL_PORT)
-DOCSDIR?=	${DRUPAL_DOCSDIR}
-.endif
-
-.if defined(DRUPAL_MODULE) || defined (DRUPAL_THEME)
-
-.if defined(DRUPAL4_MODULE)
-PKGNAMEPREFIX=	drupal4-
-DRUPAL_VERSION?=	4.7.0
-.if defined(DRUPAL_MODSUBDIR)
-DRUPAL_MODDIR?= ${DRUPAL_BASE}/${DRUPAL_MODTYPE}/${DRUPAL_MODSUBDIR}
-.else 
-DRUPAL_MODDIR?= ${DRUPAL_BASE}/${DRUPAL_MODTYPE}
-.endif
-.endif
-
-.if defined(DRUPAL5_MODULE) || defined (DRUPAL5_THEME)
-PKGNAMEPREFIX=	drupal5-
-DRUPAL_VERSION?=	5.0
-.if defined(DRUPAL_MODSUBDIR)
-DRUPAL_MODDIR?= ${DRUPAL_BASE}/sites/all/${DRUPAL_MODTYPE}/${DRUPAL_MODSUBDIR}
-.else
-DRUPAL_MODDIR?= ${DRUPAL_BASE}/sites/all/${DRUPAL_MODTYPE}/${PORTNAME}
-.endif
-.endif
-
-.if defined(DRUPAL6_MODULE) || defined (DRUPAL6_THEME)
-PKGNAMEPREFIX=	drupal6-
-DRUPAL_VERSION?=	6.0
-.if defined(DRUPAL_MODSUBDIR)
-DRUPAL_MODDIR?= ${DRUPAL_BASE}/sites/all/${DRUPAL_MODTYPE}/${DRUPAL_MODSUBDIR}
-.else
-DRUPAL_MODDIR?= ${DRUPAL_BASE}/sites/all/${DRUPAL_MODTYPE}/${PORTNAME}
-.endif
-.endif
-
-DOCSDIR?=	${DRUPAL_DOCSDIR}/${PORTNAME}
-
-.if defined(DRUPAL_MOD_SNAPSHOT)
-MASTER_SITE_DRUPAL+= \
-	${MASTER_SITE_LOCAL}
-MASTER_SITE_DRUPAL_SUBDIR=	pav/drupal
-.else
-MASTER_SITE_DRUPAL+= \
-	http://ftp.drupal.org/files/projects/ \
-	http://ftp.osuosl.org/pub/drupal/files/projects/
-MASTER_SITE_DRUPAL_SUBDIR=
-.endif
-
-MASTER_SITES?=	${MASTER_SITE_DRUPAL}
-MASTER_SITE_SUBDIR?=	${MASTER_SITE_DRUPAL_SUBDIR}
-
-DIST_SUBDIR=	drupal
-
-NO_BUILD?=	yes
-
-WRKSRC?=	${WRKDIR}/${PORTNAME}
-RUN_DEPENDS+=	${LOCALBASE}/${DRUPAL_BASE}/index.php:${PORTSDIR}/${DRUPAL_BASE}
-
-.if defined(MODULE_CONF_FILES)
-SUB_FILES=	pkg-install
-SUB_LIST+=	CONF_FILES="${MODULE_CONF_FILES:C|^|${DRUPAL_MODDIR}/|}" \
-		CONF_DIRS="${MODULE_CONF_DIRS:C|^|${DRUPAL_MODDIR}/|}"
-# XXX: where?
-PKGINSTALL=	${WRKDIR}/pkg-install
-PKGDEINSTALL=	${PKGINSTALL}
-.endif
-
-PLIST_SUB+=	DRUPAL_MODDIR=${DRUPAL_MODDIR}
-PLIST_FILES+=	${MODULE_FILES:C|^|%%DRUPAL_MODDIR%%/|}
-PLIST_FILES+=	${MODULE_CONF_FILES:C|^|%%DRUPAL_MODDIR%%/|:C|$|-dist|}
-PLIST_DIRS+=	${MODULE_DIRS:C|^|%%DRUPAL_MODDIR%%/|}
-.if defined(DRUPAL5_MODULE) || defined(DRUPAL5_THEME)  || defined(DRUPAL6_MODULE) || defined(DRUPAL6_THEME)
-PLIST_DIRS+=	${DRUPAL_MODDIR}
-.endif
-.if defined(DRUPAL_MODSUBDIR)
-PLIST_DIRS+=	${DRUPAL_MODDIR}
-.endif
-.if !defined(NOPORTDOCS)
-PLIST_FILES+=	${DOC_FILES:C|^|%%DOCSDIR%%/|}
-PLIST_DIRS+=	${DOC_DIRS:C|^|%%DOCSDIR%%/|}
-PLIST_DIRS+=	%%DOCSDIR%%
-.endif
-
-do-install:
-.if defined(DRUPAL5_MODULE) || defined(DRUPAL5_THEME) || defined(DRUPAL6_MODULE) || defined(DRUPAL6_THEME)
-	@${MKDIR} ${DRUPAL_MODDIR:C|^|${PREFIX}/|}
-	@${CHOWN} ${WWWOWN}:${WWWGRP} ${DRUPAL_MODDIR:C|^|${PREFIX}/|}
-.endif
-.if defined(MODULE_CONF_DIRS)
-	@${MKDIR} ${MODULE_CONF_DIRS:C|^|${PREFIX}/${DRUPAL_MODDIR}/|}
-	@${CHOWN} ${WWWOWN}:${WWWGRP} ${MODULE_CONF_DIRS:C|^|${PREFIX}/${DRUPAL_MODDIR}/|}
-.endif
-.if defined(MODULE_DIRS)
-	@${MKDIR} ${MODULE_DIRS:C|^|${PREFIX}/${DRUPAL_MODDIR}/|}
-	@${CHOWN} ${WWWOWN}:${WWWGRP} ${MODULE_DIRS:C|^|${PREFIX}/${DRUPAL_MODDIR}/|}
-.endif
-.for f in ${MODULE_FILES}
-	@${INSTALL_DATA} ${WRKSRC}/${f} ${PREFIX}/${DRUPAL_MODDIR}/${f}
-	@${CHOWN} ${WWWOWN}:${WWWGRP} ${PREFIX}/${DRUPAL_MODDIR}/${f}
-.endfor
-.for f in ${MODULE_CONF_FILES}
-	@${INSTALL_DATA} ${WRKSRC}/${f} ${PREFIX}/${DRUPAL_MODDIR}/${f}-dist
-	@${CHOWN} ${WWWOWN}:${WWWGRP} ${PREFIX}/${DRUPAL_MODDIR}/${f}-dist
-.endfor
-.if !defined(NOPORTDOCS)
-	@${MKDIR} ${DOCSDIR} ${DOC_DIRS:C|^|${DOCSDIR}/|}
-.for f in ${DOC_FILES}
-	@${INSTALL_DATA} ${WRKSRC}/${f} ${DOCSDIR}/${f}
-.endfor
-.endif
-
-.if defined(MODULE_CONF_FILES)
-post-install:
-	@${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
-.endif
-.endif
diff --git a/Mk/bsd.kde4.mk b/Mk/bsd.kde4.mk
deleted file mode 100644
index b97852c46756..000000000000
--- a/Mk/bsd.kde4.mk
+++ /dev/null
@@ -1,158 +0,0 @@
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-# Please view me with 4 column tabs!
-
-# Please make sure all changes to this file are past through the maintainer.
-# Do not commit them yourself (unless of course you're the Port's Wraith ;).
-KDE_MAINTAINER=		kde@FreeBSD.org
-
-# This section contains the USE_ definitions.
-# XXX: Write HAVE_ definitions sometime.
-
-# USE_QT_VER		- Says that the port uses the Qt toolkit.  Possible values:
-#					  3, 4; each specify the major version of Qt to use.
-#					  Note: 4 is handled by bsd.qt.mk.
-# USE_KDELIBS_VER	- Says that the port uses KDE libraries.  Possible values:
-#					  3 specifies the major version of KDE to use.
-#					  This implies USE_QT of the appropriate version.
-# USE_KDEBASE_VER	- Says that the port uses the KDE base.  Possible values:
-#					  3 specifies the major version of KDE to use.
-#					  This implies USE_KDELIBS of the appropriate version.
-
-# tagged MASTER_SITE_KDE_kde
-kmaster=				${MASTER_SITE_KDE:S@%/@%/:kde@g}
-.if !defined(MASTER_SITE_SUBDIR)
-MASTER_SITE_KDE_kde=	${kmaster:S@%SUBDIR%/@@g}
-.else
-ksub=${MASTER_SITE_SUBDIR}
-MASTER_SITE_KDE_kde=	${kmaster:S@%SUBDIR%/@${ksub}/@g}
-.endif # !defined(MASTER_SITE_SUBDIR)
-
-# USE_KDEBASE_VER section
-.if defined(USE_KDEBASE_VER)
-.if ${USE_KDEBASE_VER} == CVS
-LIB_DEPENDS+=	kfontinst:${PORTSDIR}/x11/kdebase
-USE_KDELIBS_VER=CVS
-.elif ${USE_KDEBASE_VER} == 3
-# kdebase 3.x common stuff
-LIB_DEPENDS+=	kfontinst:${PORTSDIR}/x11/kdebase3
-USE_KDELIBS_VER=3
-.endif # ${USE_KDEBASE_VER} == 3
-.endif # defined(USE_KDEBASE_VER)
-
-# USE_KDELIBS_VER section
-.if defined(USE_KDELIBS_VER)
-
-## This is needed for configure scripts to figure out
-## which threads lib to use
-
-CONFIGURE_ENV+= PTHREAD_LIBS="${PTHREAD_LIBS}"
-
-## Every KDE application is inherently IPv6-capable
-
-CATEGORIES+=ipv6
-
-##  XXX - This really belongs into bsd.port.mk
-.if !defined(_NO_KDE_CONFTARGET_HACK)
-CONFIGURE_TARGET=
-CONFIGURE_ARGS+=--build=${MACHINE_ARCH}-portbld-freebsd${OSREL} \
-		--x-libraries=${LOCALBASE}/lib --x-includes=${LOCALBASE}/include \
-		--disable-as-needed
-.endif
-
-.if ${USE_KDELIBS_VER} == CVS
-LIB_DEPENDS+=	kimproxy:${PORTSDIR}/x11/kdelibs
-USE_QT_VER=		CVS
-PREFIX=			${KDE_CVS_PREFIX}
-.elif ${USE_KDELIBS_VER} == 3
-# kdelibs 3.x common stuff
-LIB_DEPENDS+=	kimproxy:${PORTSDIR}/x11/kdelibs3
-USE_QT_VER=		3
-PREFIX=			${KDE_PREFIX}
-.else
-IGNORE=			cannot install: unsupported value in USE_KDELIBS_VER
-.endif # ${USE_KDELIBS_VER} == 3
-.endif # defined(USE_KDELIBS_VER)
-
-# End of USE_KDELIBS_VER section
-
-# USE_QT_VER section
-.if ${USE_QT_VER} == CVS
-
-KDE_CVS_PREFIX?=	${LOCALBASE}/kde-cvs
-QT_CVS_PREFIX?=		${LOCALBASE}/qt-cvs
-QTCPPFLAGS?=
-QTCFGLIBS?=
-
-MOC?=				${QT_CVS_PREFIX}/bin/moc
-BUILD_DEPENDS+=		${MOC}:${PORTSDIR}/x11-toolkits/qt-copy
-RUN_DEPENDS+=		${MOC}:${PORTSDIR}/x11-toolkits/qt-copy
-QTCPPFLAGS+=		-D_GETOPT_H		# added to work around broken getopt.h #inc
-.if !defined (QT_NONSTANDARD)
-CONFIGURE_ARGS+=--with-extra-libs="${LOCALBASE}/lib" \
-				--with-extra-includes="${LOCALBASE}/include"
-CONFIGURE_ENV+=	MOC="${MOC}" CPPFLAGS="${CPPFLAGS} ${QTCPPFLAGS}" LIBS="${QTCFGLIBS}" \
-				QTDIR="${QT_CVS_PREFIX}" KDEDIR="${KDE_CVS_PREFIX}"
-.endif
-
-.elif ${USE_QT_VER} == 3
-
-# Yeah, it's namespace pollution, but this is really the best place for this
-# stuff. Arts does NOT use it anymore.
-KDE_VERSION=		3.5.8
-KDE_ORIGVER=	${KDE_VERSION}
-KDE_PREFIX?=	${LOCALBASE}
-
-QTCPPFLAGS?=
-QTCGFLIBS?=
-
-# Qt 3.x common stuff
-QT_PREFIX?=		${LOCALBASE}
-MOC?=			${QT_PREFIX}/bin/moc
-#LIB_DEPENDS+=	qt-mt.3:${PORTSDIR}/x11-toolkits/qt33
-BUILD_DEPENDS+=	${QT_PREFIX}/bin/moc:${PORTSDIR}/x11-toolkits/qt33
-RUN_DEPENDS+=	${QT_PREFIX}/bin/moc:${PORTSDIR}/x11-toolkits/qt33
-QTCPPFLAGS+=	-I${LOCALBASE}/include -I${PREFIX}/include \
-				-I${QT_PREFIX}/include -D_GETOPT_H
-QTCFGLIBS+=		-Wl,-export-dynamic -L${LOCALBASE}/lib -ljpeg \
-				-L${QT_PREFIX}/lib
-.if defined(PACKAGE_BUILDING)
-TMPDIR?=	/tmp
-MAKE_ENV+=	TMPDIR="${TMPDIR}"
-CONFIGURE_ENV+=	TMPDIR="${TMPDIR}"
-.endif
-
-.if !defined(QT_NONSTANDARD)
-CONFIGURE_ARGS+=--with-qt-includes=${QT_PREFIX}/include \
-				--with-qt-libraries=${QT_PREFIX}/lib \
-				--with-extra-libs=${LOCALBASE}/lib \
-				--with-extra-includes=${LOCALBASE}/include
-CONFIGURE_ENV+=	MOC="${MOC}" CPPFLAGS="${CPPFLAGS} ${QTCPPFLAGS}" LIBS="${QTCFGLIBS}" \
-				QTDIR="${QT_PREFIX}" KDEDIR="${KDE_PREFIX}"
-.endif # !defined(QT_NONSTANDARD)
-
-.else
-IGNORE=			cannot install: unsupported value of USE_QT_VER
-.endif # defined(USE_QT_VER)
-
-# End of USE_QT_VER section
-
-# Assemble plist from parts
-# <alane@freebsd.org> 2002-12-06
-.if defined(KDE_BUILD_PLIST)
-PLIST?=			${WRKDIR}/plist
-PLIST_BASE?=	plist.base
-PLIST_APPEND?=
-plist_base=${FILESDIR}/${PLIST_BASE}
-plist_base_rm=${FILESDIR}/${PLIST_BASE}.rm
-plist_append=${PLIST_APPEND:C:([A-Za-z0-9._]+):${FILESDIR}/\1:}
-plist_append_rm=${PLIST_APPEND:C:([A-Za-z0-9._]+):${FILESDIR}/\1.rm:}
-kde-plist:
-	${CAT} ${plist_base} ${plist_append} 2>/dev/null >${PLIST}
-	-${CAT} ${plist_append_rm} ${plist_base_rm} 2>/dev/null >>${PLIST};true
-.PHONY: kde-plist
-pre-build: kde-plist
-.endif # defined(KDE_BUILD_PLIST)