diff options
| -rw-r--r-- | Mk/bsd.port.mk | 320 |
1 files changed, 240 insertions, 80 deletions
diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk index 9e674cd73662..28f14a0dfb27 100644 --- a/Mk/bsd.port.mk +++ b/Mk/bsd.port.mk @@ -1,4 +1,4 @@ -#-*- mode: Fundamental; tab-width: 4; -*- +#-*- mode: makefile; tab-width: 4; -*- # ex:ts=4 # # $FreeBSD$ @@ -145,54 +145,74 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # the system or installed from a port. # USE_GMAKE - Says that the port uses gmake. # GMAKE - Set to path of GNU make if not in $PATH (default: gmake). -# USE_AUTOMAKE - Says that the port uses automake. Implies -# USE_AUTOCONF and USE_AUTOMAKE_VER?=14. -# USE_AUTOMAKE_VER - Says that the port uses automake. Possible -# values: 14, 15; -# each specify a version of automake to use -# and appropriatly set both AUTOMAKE{,_DIR} -# and ACLOCAL{,_DIR} variables. -# Implies USE_AUTOMAKE. If set with -# unknown value, defaults to 14. -# AUTOMAKE - Set to path of GNU automake if not in $PATH (default: -# according to USE_AUTOMAKE_VER value) -# AUTOMAKE_ARGS - Pass these args to ${AUTOMAKE} if ${USE_AUTOMAKE_VER} is set. -# AUTOMAKE_ENV - Pass these env (shell-like) to ${AUTOMAKE} if -# ${USE_AUTOMAKE_VER} is set. -# ACLOCAL - Set to path of GNU automake aclocal if not in $PATH (default: -# according to USE_AUTOMAKE_VER value) -# ACLOCAL_DIR - Set to path of GNU automake aclocal shared directory (default: -# according to USE_AUTOMAKE_VER value) -# AUTOMAKE_DIR - Set to path of GNU automake shared directory (default: -# according to USE_AUTOMAKE_VER value) -# USE_AUTOCONF_VER - Says that the port uses autoconf. Possible -# values: 213; -# each specify a version of autoconf to use -# and appropriatly set both AUTOCONF{,_DIR} -# and ACLOCAL{,_DIR} variables. -# Implies USE_AUTOCONF. If set with -# unknown value, defaults to 213. -# USE_AUTOCONF - Says that the port uses autoconf. Implies -# GNU_CONFIGURE and USE_AUTOCONF_VER?=213. -# AUTOCONF - Set to path of GNU autoconf if not in $PATH (default: -# according to USE_AUTOCONF_VER value) -# AUTOCONF_ARGS - Pass these args to ${AUTOCONF} if ${USE_AUTOCONF} is set. -# AUTOCONF_ENV - Pass these env (shell-like) to ${AUTOCONF} if -# ${USE_AUTOCONF} is set. -# AUTOHEADER - Set to path of GNU autoconf autoheader -# if not in $PATH (default: according -# to USE_AUTOCONF_VER value) -# AUTORECONF - Set to path of GNU autoconf autoreconf -# if not in $PATH (default: according -# to USE_AUTOCONF_VER value) -# AUTOSCAN - Set to path of GNU autoconf autoscan -# if not in $PATH (default: according -# to USE_AUTOCONF_VER value) -# AUTOIFNAMES - Set to path of GNU autoconf autoifnames -# if not in $PATH (default: according -# to USE_AUTOCONF_VER value) -# AUTOCONF_DIR - Set to path of GNU autoconf shared directory (default: -# according to USE_AUTOCONF_VER value) +# USE_AUTOMAKE (PORT MAY SET THIS VALUE) +# - Says that the port uses automake. +# - Implies USE_AUTOCONF and USE_AUTOMAKE_VER?=14. +# - Causes automake execution prior to configure step. +# USE_AUTOMAKE_VER (PORT MAY SET THIS VALUE) +# - Says that the port uses automake; legal values +# are: 14, 15, 17. +# - Each specify a version of automake to use +# and appropriatly set both AUTOMAKE{,_DIR} +# and ACLOCAL{,_DIR} variables. +# - Implies USE_AUTOMAKE. +# - If set with an unknown value, the port is marked BROKEN. +# AUTOMAKE_ARGS (PORT MAY ALTER THIS VALUE) +# - Pass these args to ${AUTOMAKE} if ${USE_AUTOMAKE_VER} +# is set. If an application sets this value, it should +# use the += form of assignment to append, not overwrite. +# USE_AUTOCONF (PORT MAY SET THIS VALUE) +# - Says that the port uses autoconf. +# - Implies GNU_CONFIGURE=yes and USE_AUTOCONF_VER?=213. +# - Causes autoconf execution prior to configure step. +# USE_AUTOCONF_VER (PORT MAY SET THIS VALUE) +# - Says that the port uses autoconf; legal values +# are: 213, 253, 254. +# - Each specify a version of autoconf to use +# and appropriatly set AUTOCONF{,_DIR} and other +# autoconf-related program paths. +# - Implies USE_AUTOCONF. +# - If set with an unknown value, the port is marked BROKEN. +# AUTOCONF_ARGS (PORT MAY ALTER THIS VALUE) +# - Pass these args to ${AUTOCONF} if ${USE_AUTOCONF_VER} +# is set. If an application sets this value, it should +# use the += form of assignment to append, not overwrite. +# AUTOMAKE (READ-ONLY) +# - Set to path of GNU automake (default: +# according to USE_AUTOMAKE_VER value) +# AUTOMAKE_ENV (READ-ONLY) +# - Pass these env var=value pairs (shell-like) +# to ${AUTOMAKE} if ${USE_AUTOMAKE_VER} is set. +# ACLOCAL (READ-ONLY) +# - Set to path of GNU automake aclocal (default: +# according to USE_AUTOMAKE_VER value) +# ACLOCAL_DIR (READ-ONLY) +# - Set to path of GNU automake aclocal shared directory +# (default: according to USE_AUTOMAKE_VER value) +# AUTOMAKE_DIR (READ-ONLY) +# - Set to path of GNU automake shared directory (default: +# according to USE_AUTOMAKE_VER value) +# AUTOCONF (READ-ONLY) +# - Set to path of GNU autoconf (default: +# according to USE_AUTOCONF_VER value) +# AUTOCONF_ENV (READ-ONLY) +# - Pass these env var=value pairs (shell-like) +# to ${AUTOCONF} if ${USE_AUTOCONF_VER} is set. +# AUTOHEADER (READ-ONLY) +# - Set to path of GNU autoconf autoheader +# (default: according to USE_AUTOCONF_VER value) +# AUTORECONF (READ-ONLY) +# - Set to path of GNU autoconf autoreconf +# (default: according to USE_AUTOCONF_VER value) +# AUTOSCAN (READ-ONLY) +# - Set to path of GNU autoconf autoscan +# (default: according to USE_AUTOCONF_VER value) +# AUTOIFNAMES (READ-ONLY) +# - Set to path of GNU autoconf autoifnames +# (default: according to USE_AUTOCONF_VER value) +# AUTOCONF_DIR (READ-ONLY) +# - Set to path of GNU autoconf shared directory (default: +# according to USE_AUTOCONF_VER value) # USE_LIBTOOL - Says that the port uses Libtool. Implies GNU_CONFIGURE. # LIBTOOL - Set to path of libtool (default: libtool). # LIBTOOLFILES - Files to patch for libtool (defaults: "aclocal.m4" if @@ -209,8 +229,16 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # Use this if you need to replace "#!" lines in scripts. # PERL_VERSION - Full version of perl5 (see below for current value). # PERL_VER - Short version of perl5 (see below for current value). +# PERL_LEVEL - Perl version as an integer of the form MNNNPP, where +# M is major version, N is minor version, and P is +# the patch level. E.g., PERL_VERSION=5.6.1 would give +# a PERL_LEVEL of 500601. This can be used in comparisons +# to determine if the version of perl is high enough, +# whether a particular dependency is needed, etc. # PERL_ARCH - Directory name of architecture dependent libraries # (value: ${ARCH}-freebsd). +# SITE_PERL - Directory name where site specific perl packages go. +# This value is added to PLIST_SUB. # USE_BISON - Says that the port uses bison for building. # USE_IMAKE - Says that the port uses imake. Implies USE_X_PREFIX. # XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ). @@ -878,36 +906,146 @@ BUILD_DEPENDS+= unzip:${PORTSDIR}/archivers/unzip BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake CONFIGURE_ENV+= MAKE=${GMAKE} .endif -.if defined(USE_AUTOMAKE) || defined(USE_AUTOMAKE_VER) -USE_AUTOMAKE?= yes -USE_AUTOMAKE_VER?= 14 -USE_AUTOCONF= yes -.endif -.if defined(USE_AUTOMAKE_VER) -.if ${USE_AUTOMAKE_VER} == 15 -BUILD_DEPENDS+= automake:${PORTSDIR}/devel/automake +###################################################################### +# AUTOMAKE/AUTOCONF +# current => non-renamed, non-relocated version -ACLOCAL?= aclocal -AUTOMAKE?= automake -ACLOCAL_DIR?= ${LOCALBASE}/share/aclocal -AUTOMAKE_DIR?= ${LOCALBASE}/share/automake -.else -BUILD_DEPENDS+= automake14:${PORTSDIR}/devel/automake14 +########## private variables +# old_{am,ac}ver ==> numeric version of "old" port[*] +# cur_{am,ac}ver ==> numeric version of "current" port +# dev_{am,ac}ver ==> numeric version of "devel" port +# use_{am,ac}path ==> numeric version we are using here +# {am,ac}path ==> path to non-suffixed binary, if any +# autotools_path ==> string to prepend to PATH, if any +# +# [*] "default" version in case of USE_AUTOMAKE or USE_AUTOCONF w/o version -AUTOMAKE_ARGS+= -i -USE_AUTOCONF_VER?= 213 -.endif -.endif -.if defined(USE_AUTOCONF) || defined(USE_AUTOCONF_VER) -USE_AUTOCONF?= yes -USE_AUTOCONF_VER?= 213 +########## +#.if defined(AUTOMAKE) || defined(AUTOCONF) +#BROKEN="AUTOMAKE and AUTOCONF are read-only values. \ +# You may not assign to them" +#.endif # defined(AUTOMAKE) || defined(AUTOCONF) + +########## versions +old_amver= 14 +cur_amver= 15 +dev_amver= 17 +old_acver= 213 +cur_acver= 253 +dev_acver= 254 +########## automake setup +.if defined(USE_AUTOMAKE) || defined(USE_AUTOMAKE_VER) +USE_AUTOMAKE?= yes +USE_AUTOMAKE_VER?= ${old_amver} +use_amver= ${USE_AUTOMAKE_VER:L} +.if ${use_amver} == ${cur_amver} +ACLOCAL_DIR= ${LOCALBASE}/share/aclocal +AUTOMAKE_DIR= ${LOCALBASE}/share/automake +BUILD_DEPENDS+= automake:${PORTSDIR}/devel/automake +USE_AUTOCONF_VER= ${cur_acver} +.elif ${use_amver} == ${old_amver} || ${use_amver} == ${dev_amver} +ACLOCAL_DIR= ${LOCALBASE}/share/aclocal${use_amver} +AUTOMAKE_DIR= ${LOCALBASE}/share/automake${use_amver} +BUILD_DEPENDS+= automake${use_amver}:${PORTSDIR}/devel/automake${use_amver} +ampath= ${LOCALBASE}/libexec/automake${use_amver}: +.if ${use_amver} == ${old_amver} +AUTOMAKE_ARGS+= -i +USE_AUTOCONF_VER=${old_acver} +.else +USE_AUTOCONF_VER=${dev_acver} +.endif # ${use_amver} == ${old_amver} +.else # bad automake version +BROKEN="unknown AUTOMAKE version: ${USE_AUTOMAKE_VER}" +.endif # ${use_amver} == ${cur_amver} +.endif # defined(USE_AUTOMAKE) || defined(USE_AUTOMAKE_VER) + +########## autoconf setup +.if defined(USE_AUTOCONF) || defined(USE_AUTOCONF_VER) +USE_AUTOCONF?= yes +USE_AUTOCONF_VER?= ${old_acver} +use_acver= ${USE_AUTOCONF_VER:L} +.if ${use_acver} == ${cur_acver} +AUTOCONF_DIR= ${LOCALBASE}/share/autoconf +BUILD_DEPENDS+= autoconf:${PORTSDIR}/devel/autoconf +USE_AUTOCONF_VER= ${cur_acver} +.elif ${use_acver} == ${old_acver} || ${use_acver} == ${dev_acver} +AUTOCONF_DIR= ${LOCALBASE}/share/autoconf${use_acver} +BUILD_DEPENDS+= autoconf${use_acver}:${PORTSDIR}/devel/autoconf${use_acver} +acpath= ${LOCALBASE}/libexec/autoconf${use_acver} +.else # bad autoconf version +BROKEN="unknown AUTOCONF version: ${USE_AUTOCONF_VER}" +.endif # ${use_acver} == ${cur_acver} +.endif # defined(USE_AUTOCONF) || defined(USE_AUTOCONF_VER) + +########## auto* ==> GNU 'configure' +.if defined(USE_AUTOMAKE_VER) || defined(USE_AUTOCONF_VER) GNU_CONFIGURE= yes -.endif -.if defined(USE_AUTOCONF_VER) -BUILD_DEPENDS+= autoconf213:${PORTSDIR}/devel/autoconf213 -.endif +.endif # defined(USE_AUTOMAKE_VER) || defined(USE_AUTOCONF_VER) + +########## set up paths to tools +.if defined(ampath) +autotools_path=${ampath}${acpath} +.elif defined(acpath) +autotools_path=${acpath} +.endif # defined(ampath) + +########## prefix to path, add to env vars +.if defined(autotools_path) +MAKE_ENV+= PATH=${autotools_path}:${PATH} +CONFIGURE_ENV+= PATH=${autotools_path}:${PATH} +SCRIPTS_ENV+= PATH=${autotools_path}:${PATH} +AUTOCONF_ENV+= PATH=${autotools_path}:${PATH} +AUTOMAKE_ENV+= PATH=${autotools_path}:${PATH} +AUTOTOOLS_ENV+= PATH=${autotools_path}:${PATH} +.endif # defined(autotools_path) + +########## set up automake "names" +.if defined(use_amver) +.if !defined(ampath) +ACLOCAL?= aclocal +AUTOMAKE?= automake +.else # defined(ampath) +ACLOCAL?= ${ampath:S/://}/aclocal +AUTOMAKE?= ${ampath:S/://}/automake +.endif # !defined(ampath) +.endif # defined(use_amver) + +########## set up autoconf "names" +.if defined(use_acver) +.if !defined(acpath) +AUTOCONF?= autoconf +AUTOHEADER?= autoheader +AUTOIFNAMES?= ifnames +AUTORECONF?= autoreconf +AUTOSCAN?= autoscan +AUTOUPDATE?= autoupdate +.else # defined(acpath) +AUTOCONF?= ${acpath}/autoconf +AUTOHEADER?= ${acpath}/autoheader +AUTOIFNAMES?= ${acpath}/ifnames +AUTORECONF?= ${acpath}/autoreconf +AUTOSCAN?= ${acpath}/autoscan +AUTOUPDATE?= ${acpath}/autoupdate +.endif # !defined(acpath) +.endif # defined(use_acver) + +########## stupid port error checking +# Set all unset vars for the programs to ${FALSE}. This way +# we can catch a certain class of port Makefile errors quickly. +ACLOCAL?= ${FALSE} +AUTOMAKE?= ${FALSE} +AUTOCONF?= ${FALSE} +AUTOHEADER?=${FALSE} +AUTOIFNAMES?=${FALSE} +AUTORECONF?=${FALSE} +AUTOSCAN?= ${FALSE} +AUTOUPDATE?=${FALSE} + +# END AUTOMAKE/AUTOCONF +###################################################################### + .if defined(USE_LIBTOOL) GNU_CONFIGURE= yes BUILD_DEPENDS+= libtool:${PORTSDIR}/devel/libtool @@ -1004,9 +1142,27 @@ PERL_VER?= 5.005 PERL_ARCH?= ${ARCH}-freebsd .endif .endif + +.if !defined(PERL_LEVEL) +perl_major= ${PERL_VERSION:C|^([1-9]+).*|\1|} +_perl_minor= 00${PERL_VERSION:C|^([1-9]+)\.([0-9]+).*|\2|} +perl_minor= ${_perl_minor:C|^.*(...)|\1|} +.if ${perl_minor} >= 100 +perl_minor= ${PERL_VERSION:C|^([1-9]+)\.([0-9][0-9][0-9]).*|\2|} +perl_patch= ${PERL_VERSION:C|^.*(..)|\1|} +.else # ${perl_minor} < 100 +_perl_patch= 0${PERL_VERSION:C|^([1-9]+)\.([0-9]+)\.*|0|} +perl_patch= ${_perl_patch:C|^.*(..)|\1|} +.endif # ${perl_minor} < 100 +PERL_LEVEL= ${perl_major}${perl_minor}${perl_patch} +.endif # !defined(PERL_LEVEL) + +SITE_PERL?= ${LOCALBASE}/lib/perl5/site_perl/${PERL_VER} + PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \ PERL_VER=${PERL_VER} \ - PERL_ARCH=${PERL_ARCH} + PERL_ARCH=${PERL_ARCH} \ + SITE_PERL=${SITE_PERL:S|^${LOCALBASE}/||} .if defined(PERL_CONFIGURE) USE_PERL5= yes @@ -1869,7 +2025,15 @@ XFREE86_HTML_MAN?= no .endif .endif -# Put this for down as possible so it will catch all PLIST_SUB definitions. +DOCSDIR?= ${PREFIX}/share/doc/${PORTNAME} +EXAMPLESDIR?= ${PREFIX}/share/examples/${PORTNAME} +DATADIR?= ${PREFIX}/share/${PORTNAME} + +PLIST_SUB+= DOCSDIR="${DOCSDIR:S,^${PREFIX}/,,}" \ + EXAMPLESDIR="${EXAMPLESDIR:S,^${PREFIX}/,,}" \ + DATADIR="${DATADIR:S,^${PREFIX}/,,}" + +# Put this as far down as possible so it will catch all PLIST_SUB definitions. .if defined(INSTALLS_SHLIB) LDCONFIG_DIRS?= %%PREFIX%%/lib @@ -1877,10 +2041,6 @@ LDCONFIG_PLIST!= ${ECHO_CMD} ${LDCONFIG_DIRS} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ LDCONFIG_RUNLIST!= ${ECHO_CMD} ${LDCONFIG_PLIST} | ${SED} -e "s!%D!${PREFIX}!g" .endif -DOCSDIR?= ${PREFIX}/share/doc/${PORTNAME} -EXAMPLESDIR?= ${PREFIX}/share/examples/${PORTNAME} -DATADIR?= ${PREFIX}/share/${PORTNAME} - .MAIN: all ################################################################ |