Move security/openvpn to security/openvpn20 (after previous repocopy).

Update security/openvpn20 to 2.0.9, revising pkg-message.

Move security/openvpn-devel to security/openvpn and
update security/openvpn to 2.1.1.

Remove security/openvpn-devel, adding a MOVED entry.

Update security/Makefile to remove openvpn-devel and add openvpn20 to
SUBDIRS.

Add a UPDATING entry for this shuffle.  Currently without upgrade
instructions since neither portupgrade nor portmaster are up to the
task (because of the CONFLICTS).

Approved by:  garga@ (mentor)

8 files changed, 0 insertions, 404 deletions

diff --git a/security/openvpn-devel/Makefile b/security/openvpn-devel/Makefile
deleted file mode 100644
index f1e985403e5c..000000000000
--- a/security/openvpn-devel/Makefile
+++ /dev/null
@@ -1,116 +0,0 @@
-# New ports collection makefile for:	openvpn
-# Date created:		2002-06-23
-# Whom:			Matthias Andree <matthias.andree@gmx.de>
-#
-# $FreeBSD$
-#
-
-PORTNAME=	openvpn
-DISTVERSION=	2.1_rc20
-CATEGORIES=	security net
-MASTER_SITES=	http://openvpn.net/release/
-PKGNAMESUFFIX=	-devel
-
-MAINTAINER=	matthias.andree@gmx.de
-COMMENT=	Secure IP/Ethernet tunnel daemon
-
-CONFLICTS=	openvpn-[0-9]*
-
-GNU_CONFIGURE=	yes
-USE_OPENSSL=	yes
-CONFIGURE_ARGS=	--with-lzo-lib=${LOCALBASE}/lib \
-		--with-lzo-headers=${LOCALBASE}/include
-INSTALL_TARGET=	install mandir=${MANPREFIX}/man
-
-MAN8=		openvpn.8
-
-OPTIONS=	PW_SAVE "Interactive passwords may be read from a file" off \
-		PKCS11  "Use security/pkcs11-helper" off
-
-USE_RC_SUBR=	openvpn.sh
-USE_LDCONFIG=	${PREFIX}/lib
-
-SUB_FILES=	pkg-message pkg-req
-SUB_LIST+=	OSVERSION=${OSVERSION}
-
-.include <bsd.port.pre.mk>
-
-SUB_LIST+=	RCSFX=${RC_SUBR_SUFFIX}
-
-.ifdef (LOG_OPENVPN)
-CFLAGS+=	-DLOG_OPENVPN=${LOG_OPENVPN}
-.endif
-
-pre-configure:
-.ifdef (LOG_OPENVPN)
-	@${ECHO} "Building with LOG_OPENVPN=${LOG_OPENVPN}"
-.else
-	@${ECHO} ""
-	@${ECHO} "You may use the following build options:"
-	@${ECHO} ""
-	@${ECHO} "      LOG_OPENVPN={Valid syslog facility}"
-	@${ECHO} "      EXAMPLE:  make LOG_OPENVPN=LOG_DAEMON"
-	@${ECHO} ""
-.endif
-
-# NOTE: there is no way to explicitly specify the LZO version to OpenVPN,
-# if LZO2 and LZO1 are installed, OpenVPN will pick LZO2.
-# So depend on LZO1 only if it's already there and LZO2 isn't.
-# PACKAGE_BUILDING will also force LZO2.
-.if exists(${LOCALBASE}/lib/liblzo2.so.2) || !exists(${LOCALBASE}/lib/liblzo.so.1) || defined(PACKAGE_BUILDING)
-LIB_DEPENDS+=	lzo2.2:${PORTSDIR}/archivers/lzo2
-.else
-LIB_DEPENDS+=	lzo.1:${PORTSDIR}/archivers/lzo
-.endif
-
-.if defined(WITH_PW_SAVE)
-CONFIGURE_ARGS+=	--enable-password-save
-.endif
-
-.if defined(WITH_PKCS11)
-LIB_DEPENDS+=	pkcs11-helper.1:${PORTSDIR}/security/pkcs11-helper
-.else
-CONFIGURE_ARGS+=	--disable-pkcs11
-.endif
-
-post-patch:
-	@${FIND} ${WRKSRC} -name \*.orig -delete
-	@${FIND} ${WRKSRC} -name \*.bak -delete
-
-post-build:
-	cd ${WRKSRC}/plugin/down-root && ${MAKE}
-	cd ${WRKSRC}/plugin/auth-pam && ${CC} ${CPPFLAGS} -I../.. -DDLOPEN_PAM=0 ${CFLAGS} -fPIC -shared -Wl,-soname,openvpn-auth-pam.so -o openvpn-auth-pam.so auth-pam.c pamdl.c -lc -lpam
-	@# self-tests here
-.if !defined(WITHOUT_CHECK)
-	cd ${WRKSRC} && ${MAKE} check
-.endif
-
-pre-install:
-	PKG_PREFIX=${PREFIX} ${SH} ${PKGREQ} ${PKGNAME} INSTALL
-
-post-install:
-	${MKDIR} ${PREFIX}/lib
-	${INSTALL_PROGRAM} ${WRKSRC}/plugin/down-root/openvpn-down-root.so ${PREFIX}/lib/
-	${INSTALL_PROGRAM} ${WRKSRC}/plugin/auth-pam/openvpn-auth-pam.so ${PREFIX}/lib/
-.if !defined(NOPORTDOCS)
-	${MKDIR} ${DOCSDIR}
-	${INSTALL_DATA} ${WRKSRC}/plugin/down-root/README ${DOCSDIR}/README.openvpn-down-root
-	${INSTALL_DATA} ${WRKSRC}/plugin/auth-pam/README ${DOCSDIR}/README.openvpn-auth-pam
-.for docs in AUTHORS COPYING COPYRIGHT.GPL ChangeLog INSTALL \
-	PORTS README
-	${INSTALL_DATA} ${WRKSRC}/${docs} ${DOCSDIR}/
-.endfor
-.for dir in easy-rsa easy-rsa/1.0 easy-rsa/2.0 sample-config-files
-	${MKDIR} ${DOCSDIR}/${dir}
-	${FIND} ${WRKSRC}/${dir}/ -maxdepth 1 -type f -exec ${INSTALL_DATA} \{\} ${DOCSDIR}/${dir} \;
-.endfor
-.for dir in sample-scripts
-	${MKDIR} ${DOCSDIR}/${dir}
-	${FIND} ${WRKSRC}/${dir}/ -maxdepth 1 -type f -exec ${INSTALL_SCRIPT} \{\} ${DOCSDIR}/${dir} \;
-.endfor
-.else
-	-@${RMDIR} ${DOCSDIR}
-.endif
-	@${CAT} ${PKGMESSAGE}
-
-.include <bsd.port.post.mk>
diff --git a/security/openvpn-devel/distinfo b/security/openvpn-devel/distinfo
deleted file mode 100644
index bda9168c9099..000000000000
--- a/security/openvpn-devel/distinfo
+++ /dev/null
@@ -1,3 +0,0 @@
-MD5 (openvpn-2.1_rc20.tar.gz) = 8187f8f21507faac5e320e32747203b8
-SHA256 (openvpn-2.1_rc20.tar.gz) = 4d423b48cb3ccc66b5669b9404dcb028cb62af410361c09e6056db0c5d2a1267
-SIZE (openvpn-2.1_rc20.tar.gz) = 844253
diff --git a/security/openvpn-devel/files/openvpn.sh.in b/security/openvpn-devel/files/openvpn.sh.in
deleted file mode 100644
index ca66486c06ab..000000000000
--- a/security/openvpn-devel/files/openvpn.sh.in
+++ /dev/null
@@ -1,129 +0,0 @@
-#!/bin/sh
-#
-# openvpn.sh - load tun/tap driver and start OpenVPN daemon
-#
-# (C) Copyright 2005 - 2008 by Matthias Andree
-# based on suggestions by Matthias Grimm and Dirk Gouders
-# with multi-instance contribution from Denis Shaposhnikov, Gleb Kozyrev
-# and Vasil Dimov
-#
-# $FreeBSD$
-# 
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or (at your option) any later
-# version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
-# details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 51 Franklin
-# Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# PROVIDE: openvpn
-# REQUIRE: DAEMON
-# KEYWORD: shutdown
-
-# -----------------------------------------------------------------------------
-#
-# This script supports running multiple instances of openvpn.
-# To run additional instance link this script to something like
-# % ln -s openvpn openvpn_foo
-# and define additional openvpn_foo_* variables in one of
-# /etc/rc.conf, /etc/rc.conf.local or /etc/rc.conf.d/openvpn_foo
-#
-# Below NAME should be substituted with the name of this script. By default
-# it is openvpn, so read as openvpn_enable. If you linked the script to
-# openvpn_foo, then read as openvpn_foo_enable etc.
-#
-# The following variables are supported (defaults are shown).
-# You can place them in any of
-# /etc/rc.conf, /etc/rc.conf.local or /etc/rc.conf.d/NAME
-#
-# NAME_enable="NO"	# set to YES to enable openvpn
-# NAME_if=""		# driver(s) to load, set to "tun", "tap" or "tun tap"
-#
-# # optional:
-# NAME_flags=""				# additional command line arguments
-# NAME_configfile="%%PREFIX%%/etc/openvpn/NAME.conf"	# --config file
-# NAME_dir="%%PREFIX%%/etc/openvpn"	# --cd directory
-#
-# You also need to set NAME_configfile and NAME_dir, if the configuration
-# file and directory where keys and certificates reside differ from the above
-# settings.
-#
-# Note that we deliberately refrain from unloading drivers.
-#
-# For further documentation, please see openvpn(8).
-#
-
-. %%RC_SUBR%%
-
-case "$0" in
-/etc/rc*)
-	# during boot (shutdown) $0 is /etc/rc (/etc/rc.shutdown),
-	# so get the name of the script from $_file
-	name=$(basename "$_file" .sh)
-	;;
-*)
-	name=$(basename "$0" .sh)
-	;;
-esac
-
-rcvar=$(set_rcvar)
-
-openvpn_precmd()
-{
-	for i in $interfaces ; do
-		# FreeBSD <= 5.4 does not know kldstat's -m option
-		# FreeBSD >= 6.0 does not add debug.* sysctl information
-		# in the default build - we check both to keep things simple
-		if ! sysctl debug.if_${i}_debug >/dev/null 2>&1 \
-			&& ! kldstat -m if_${i} >/dev/null 2>&1 ; then
-			if ! kldload if_${i} ; then
-				warn "Could not load $i module."
-				return 1
-			fi
-		fi
-	done
-	return 0
-}
-
-stop_postcmd()
-{
-	rm -f "$pidfile" || warn "Could not remove $pidfile."
-}
-
-# support SIGHUP to reparse configuration file
-extra_commands="reload"
-
-# pidfile
-pidfile="/var/run/${name}.pid"
-
-# command and arguments
-command="%%PREFIX%%/sbin/openvpn"
-
-# run this first
-start_precmd="openvpn_precmd"
-# and this last
-stop_postcmd="stop_postcmd"
-
-load_rc_config ${name}
-
-eval ": \${${name}_enable:=\"NO\"}"
-eval ": \${${name}_flags:=\"\"}"
-eval ": \${${name}_if:=\"\"}"
-eval ": \${${name}_configfile:=\"%%PREFIX%%/etc/openvpn/${name}.conf\"}"
-eval ": \${${name}_dir:=\"%%PREFIX%%/etc/openvpn\"}"
-
-configfile="$(eval echo \${${name}_configfile})"
-dir="$(eval echo \${${name}_dir})"
-interfaces="$(eval echo \${${name}_if})"
-
-required_files=${configfile}
-command_args="--cd ${dir} --daemon ${name} --config ${configfile} --writepid ${pidfile}"
-
-run_rc_command "$1"
diff --git a/security/openvpn-devel/files/patch-selftest-ports b/security/openvpn-devel/files/patch-selftest-ports
deleted file mode 100644
index 5e195261eecb..000000000000
--- a/security/openvpn-devel/files/patch-selftest-ports
+++ /dev/null
@@ -1,26 +0,0 @@
---- sample-config-files/loopback-client.orig	Mon Oct 16 00:30:20 2006
-+++ sample-config-files/loopback-client	Wed Apr  4 00:51:31 2007
-@@ -9,8 +9,8 @@
- #  ./openvpn --config sample-config-files/loopback-client  (In one window) 
- #  ./openvpn --config sample-config-files/loopback-server  (Simultaneously in another window) 
- 
--rport 16000
--lport 16001
-+rport 16100
-+lport 16101
- remote localhost
- local localhost
- dev null
---- sample-config-files/loopback-server.orig	Mon Oct 16 00:30:20 2006
-+++ sample-config-files/loopback-server	Wed Apr  4 00:51:31 2007
-@@ -9,8 +9,8 @@
- #  ./openvpn --config sample-config-files/loopback-client  (In one window) 
- #  ./openvpn --config sample-config-files/loopback-server  (Simultaneously in another window) 
- 
--rport 16001
--lport 16000
-+rport 16101
-+lport 16100
- remote localhost
- local localhost
- dev null
diff --git a/security/openvpn-devel/files/pkg-message.in b/security/openvpn-devel/files/pkg-message.in
deleted file mode 100644
index 5abc9aad90e0..000000000000
--- a/security/openvpn-devel/files/pkg-message.in
+++ /dev/null
@@ -1,12 +0,0 @@
-### ------------------------------------------------------------------------
-###  Edit /etc/rc.conf[.local] to start OpenVPN automatically at system
-###  startup. See %%PREFIX%%/etc/rc.d/openvpn%%RCSFX%% for details.
-### ------------------------------------------------------------------------
-###  For compatibility notes when interoperating with older OpenVPN
-###  versions, please, see <http://openvpn.net/relnotes.html>
-### ------------------------------------------------------------------------
-###  If you want to donate to OpenVPN: <http://openvpn.net/donate.html>
-### ------------------------------------------------------------------------
-###  NOTE THIS IS AN UNSTABLE VERSION UNDER DEVELOPMENT!
-###  It may or may not be suitable for production. Use at your own risk.
-### ------------------------------------------------------------------------
diff --git a/security/openvpn-devel/files/pkg-req.in b/security/openvpn-devel/files/pkg-req.in
deleted file mode 100644
index 15c8242d8724..000000000000
--- a/security/openvpn-devel/files/pkg-req.in
+++ /dev/null
@@ -1,29 +0,0 @@
-set -e
-
-rcvers() {
-	# determine if we have "old" or "new" (rcorder integration) scheme
-	# for %%PREFIX%%/etc/rc.d/* files
-	if test $1 -ge 700007 || test $1 -lt 700000 -a $1 -ge 600101 ; then
-		echo 2
-	else
-		echo 1
-	fi
-}
-
-if [ "$2" = INSTALL ] ; then
-	# check if the base system is new enough for us,
-	# which should only matter for package installs.
-	buildrc=$(rcvers %%OSVERSION%%)
-	execrc=$(rcvers $(sysctl -n kern.osreldate) )
-	if test $buildrc -gt $execrc ; then
-		cat <<EOF
-
-Error:   this package, $1, was compiled for a newer FreeBSD
-======   version that uses different boot scripts.
-         Therefore, the rc.d script WILL NOT WORK.
-         Please update your ports tree and install security/openvpn from there.
-
-EOF
-		exit 1
-	fi
-fi
diff --git a/security/openvpn-devel/pkg-descr b/security/openvpn-devel/pkg-descr
deleted file mode 100644
index b527fa8fa75e..000000000000
--- a/security/openvpn-devel/pkg-descr
+++ /dev/null
@@ -1,10 +0,0 @@
-OpenVPN is a robust, scalable and highly configurable VPN (Virtual Private
-Network) daemon which can be used to securely link two or more private networks
-using an encrypted tunnel over the internet. It can operate over UDP or TCP,
-can use SSL or a pre-shared secret to authenticate peers, and in SSL mode, one
-server can handle many clients.
-
-WWW: http://openvpn.net/
-
-- Matthias Andree
-matthias.andree@gmx.de
diff --git a/security/openvpn-devel/pkg-plist b/security/openvpn-devel/pkg-plist
deleted file mode 100644
index dbec65c3f248..000000000000
--- a/security/openvpn-devel/pkg-plist
+++ /dev/null
@@ -1,79 +0,0 @@
-sbin/openvpn
-lib/openvpn-auth-pam.so
-lib/openvpn-down-root.so
-%%PORTDOCS%%%%DOCSDIR%%/AUTHORS
-%%PORTDOCS%%%%DOCSDIR%%/COPYING
-%%PORTDOCS%%%%DOCSDIR%%/COPYRIGHT.GPL
-%%PORTDOCS%%%%DOCSDIR%%/ChangeLog
-%%PORTDOCS%%%%DOCSDIR%%/INSTALL
-%%PORTDOCS%%%%DOCSDIR%%/PORTS
-%%PORTDOCS%%%%DOCSDIR%%/README
-%%PORTDOCS%%%%DOCSDIR%%/README.openvpn-auth-pam
-%%PORTDOCS%%%%DOCSDIR%%/README.openvpn-down-root
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/README
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-ca
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-dh
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-inter
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-key
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-key-pass
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-key-pkcs12
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-key-server
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-req
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/build-req-pass
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/clean-all
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/list-crl
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/make-crl
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/openssl.cnf
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/revoke-crt
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/revoke-full
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/sign-req
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/1.0/vars
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/Makefile
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/README
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-ca
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-dh
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-inter
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-key
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-key-pass
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-key-pkcs12
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-key-server
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-req
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/build-req-pass
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/clean-all
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/inherit-inter
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/list-crl
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/openssl-0.9.6.cnf
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/openssl.cnf
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/pkitool
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/revoke-full
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/sign-req
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/vars
-%%PORTDOCS%%%%DOCSDIR%%/easy-rsa/2.0/whichopensslcnf
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/README
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/client.conf
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/firewall.sh
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/home.up
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/loopback-client
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/loopback-server
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/office.up
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/openvpn-shutdown.sh
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/openvpn-startup.sh
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/server.conf
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/static-home.conf
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/static-office.conf
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/tls-home.conf
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/tls-office.conf
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/xinetd-client-config
-%%PORTDOCS%%%%DOCSDIR%%/sample-config-files/xinetd-server-config
-%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/auth-pam.pl
-%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/bridge-start
-%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/bridge-stop
-%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/openvpn.init
-%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/ucn.pl
-%%PORTDOCS%%%%DOCSDIR%%/sample-scripts/verify-cn
-%%PORTDOCS%%@dirrm %%DOCSDIR%%/sample-scripts
-%%PORTDOCS%%@dirrm %%DOCSDIR%%/sample-config-files
-%%PORTDOCS%%@dirrm %%DOCSDIR%%/easy-rsa/2.0
-%%PORTDOCS%%@dirrm %%DOCSDIR%%/easy-rsa/1.0
-%%PORTDOCS%%@dirrm %%DOCSDIR%%/easy-rsa
-%%PORTDOCS%%@dirrm %%DOCSDIR%%