diff options
author | Kris Kennaway <kris@FreeBSD.org> | 2002-11-11 21:14:21 +0000 |
---|---|---|
committer | Kris Kennaway <kris@FreeBSD.org> | 2002-11-11 21:14:21 +0000 |
commit | 76378afefc22709c1cb4e67cfff8e6528b562a21 (patch) | |
tree | 8edac2832e54054009a3466aa3cd09579687c036 /Mk/bsd.port.mk | |
parent | Replace hard dependences on auto{conf,make} with newly added (diff) |
Revert the previous commit. A version of the previous patch was
extensively tested on the bento cluster, but the committed version
introduces significant new breakage at a very inopportune time. This
will be revisited later.
Notes
Notes:
svn path=/head/; revision=69925
Diffstat (limited to 'Mk/bsd.port.mk')
-rw-r--r-- | Mk/bsd.port.mk | 251 |
1 files changed, 60 insertions, 191 deletions
diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk index 78eae1e02ec6..8f30c56529a3 100644 --- a/Mk/bsd.port.mk +++ b/Mk/bsd.port.mk @@ -145,50 +145,54 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # the system or installed from a port. # USE_GMAKE - Says that the port uses gmake. # GMAKE - Set to path of GNU make if not in $PATH (default: gmake). -# USE_AUTOMAKE - Says that the port uses automake. Implies -# USE_AUTOCONF and USE_AUTOMAKE_VER?=14. +# USE_AUTOMAKE - Says that the port uses automake. Implies +# USE_AUTOCONF and USE_AUTOMAKE_VER?=14. # USE_AUTOMAKE_VER - Says that the port uses automake. Possible -# values: 14, 15, 17, current, devel; -# each specify a version of automake to use -# and appropriatly set both AUTOMAKE{,_DIR} -# and ACLOCAL{,_DIR} variables. -# Implies USE_AUTOMAKE. If set with -# unknown value, defaults to "14". -# AUTOMAKE - Set to path of GNU automake (default: -# according to USE_AUTOMAKE_VER value) +# values: 14, 15; +# each specify a version of automake to use +# and appropriatly set both AUTOMAKE{,_DIR} +# and ACLOCAL{,_DIR} variables. +# Implies USE_AUTOMAKE. If set with +# unknown value, defaults to 14. +# AUTOMAKE - Set to path of GNU automake if not in $PATH (default: +# according to USE_AUTOMAKE_VER value) # AUTOMAKE_ARGS - Pass these args to ${AUTOMAKE} if ${USE_AUTOMAKE_VER} is set. # AUTOMAKE_ENV - Pass these env (shell-like) to ${AUTOMAKE} if -# ${USE_AUTOMAKE_VER} is set. -# ACLOCAL - Set to path of GNU automake aclocal (default: -# according to USE_AUTOMAKE_VER value) -# ACLOCAL_DIR - Set to path of GNU automake aclocal shared directory -# (default: according to USE_AUTOMAKE_VER value) +# ${USE_AUTOMAKE_VER} is set. +# ACLOCAL - Set to path of GNU automake aclocal if not in $PATH (default: +# according to USE_AUTOMAKE_VER value) +# ACLOCAL_DIR - Set to path of GNU automake aclocal shared directory (default: +# according to USE_AUTOMAKE_VER value) # AUTOMAKE_DIR - Set to path of GNU automake shared directory (default: -# according to USE_AUTOMAKE_VER value) +# according to USE_AUTOMAKE_VER value) # USE_AUTOCONF_VER - Says that the port uses autoconf. Possible -# values: 213, 253, 254, current, devel; -# each specify a version of autoconf to use -# and appropriatly set both AUTOCONF{,_DIR} -# and ACLOCAL{,_DIR} variables. -# Implies USE_AUTOCONF. If set with -# unknown value, defaults to 213. +# values: 213; +# each specify a version of autoconf to use +# and appropriatly set both AUTOCONF{,_DIR} +# and ACLOCAL{,_DIR} variables. +# Implies USE_AUTOCONF. If set with +# unknown value, defaults to 213. # USE_AUTOCONF - Says that the port uses autoconf. Implies -# GNU_CONFIGURE and USE_AUTOCONF_VER?=213. -# AUTOCONF - Set to name of GNU autoconf (default: -# according to USE_AUTOCONF_VER value) +# GNU_CONFIGURE and USE_AUTOCONF_VER?=213. +# AUTOCONF - Set to path of GNU autoconf if not in $PATH (default: +# according to USE_AUTOCONF_VER value) # AUTOCONF_ARGS - Pass these args to ${AUTOCONF} if ${USE_AUTOCONF} is set. # AUTOCONF_ENV - Pass these env (shell-like) to ${AUTOCONF} if -# ${USE_AUTOCONF} is set. -# AUTOHEADER - Set to name of GNU autoconf autoheader -# (default: according to USE_AUTOCONF_VER value) -# AUTORECONF - Set to name of GNU autoconf autoreconf -# (default: according to USE_AUTOCONF_VER value) -# AUTOSCAN - Set to name of GNU autoconf autoscan -# (default: according to USE_AUTOCONF_VER value) -# AUTOIFNAMES - Set to name of GNU autoconf autoifnames -# (default: according to USE_AUTOCONF_VER value) -# AUTOCONF_DIR - Set to name of GNU autoconf shared directory (default: -# according to USE_AUTOCONF_VER value) +# ${USE_AUTOCONF} is set. +# AUTOHEADER - Set to path of GNU autoconf autoheader +# if not in $PATH (default: according +# to USE_AUTOCONF_VER value) +# AUTORECONF - Set to path of GNU autoconf autoreconf +# if not in $PATH (default: according +# to USE_AUTOCONF_VER value) +# AUTOSCAN - Set to path of GNU autoconf autoscan +# if not in $PATH (default: according +# to USE_AUTOCONF_VER value) +# AUTOIFNAMES - Set to path of GNU autoconf autoifnames +# if not in $PATH (default: according +# to USE_AUTOCONF_VER value) +# AUTOCONF_DIR - Set to path of GNU autoconf shared directory (default: +# according to USE_AUTOCONF_VER value) # USE_LIBTOOL - Says that the port uses Libtool. Implies GNU_CONFIGURE. # LIBTOOL - Set to path of libtool (default: libtool). # LIBTOOLFILES - Files to patch for libtool (defaults: "aclocal.m4" if @@ -872,167 +876,36 @@ BUILD_DEPENDS+= unzip:${PORTSDIR}/archivers/unzip BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake CONFIGURE_ENV+= MAKE=${GMAKE} .endif - -###################################################################### -# AUTOMAKE/AUTOCONF SETUP -# current => non-renamed, non-relocated version - -# Set all the vars for the programs to ${FALSE}. This way -# we can catch a certain class of port Makefile errors quickly. - .if defined(USE_AUTOMAKE) || defined(USE_AUTOMAKE_VER) -USE_AUTOMAKE?= yes +USE_AUTOMAKE?= yes USE_AUTOMAKE_VER?= 14 -# 1. Unify to model of: -# devel, current, or default (14). - -.if ${USE_AUTOMAKE_VER} != "devel" && ${USE_AUTOMAKE_VER} != "current" -.if ${USE_AUTOMAKE_VER} > 15 -USE_AUTOMAKE_VER= devel -.elif ${USE_AUTOMAKE_VER} > 14 -USE_AUTOMAKE_VER= current -.else # USE_AUTOMAKE_VER == 14 -USE_AUTOMAKE_VER= 14 -.endif # USE_AUTOMAKE_VER == 14 -.endif # ${USE_AUTOMAKE_VER} != "devel" && ${USE_AUTOMAKE_VER} != "current" - -# 2. Set paths according to above model. - -.if ${USE_AUTOMAKE_VER:L} == devel -AMVER= 17 -ACLOCAL_DIR?= ${LOCALBASE}/share/aclocal${AMVER} -AUTOMAKE_DIR?= ${LOCALBASE}/share/automake${AMVER} -AUTOMAKE_PATH?= ${LOCALBASE}/libexec/automake${AMVER} -BUILD_DEPENDS+= automake${AMVER}:${PORTSDIR}/devel/automake${AMVER} -USE_AUTOCONF_VER= 254 -.elif ${USE_AUTOMAKE_VER:L} == current -AMVER= 15 +USE_AUTOCONF= yes +.endif +.if defined(USE_AUTOMAKE_VER) +.if ${USE_AUTOMAKE_VER} == 15 +BUILD_DEPENDS+= automake:${PORTSDIR}/devel/automake + +ACLOCAL?= aclocal +AUTOMAKE?= automake ACLOCAL_DIR?= ${LOCALBASE}/share/aclocal AUTOMAKE_DIR?= ${LOCALBASE}/share/automake -BUILD_DEPENDS+= automake:${PORTSDIR}/devel/automake -USE_AUTOCONF_VER= 253 -.else # != current && != devel -AMVER= 14 -AUTOMAKE_ARGS+= --include-deps -ACLOCAL_DIR?= ${LOCALBASE}/share/aclocal${AMVER} -AUTOMAKE_DIR?= ${LOCALBASE}/share/automake${AMVER} -AUTOMAKE_PATH?= ${LOCALBASE}/libexec/automake${AMVER} -BUILD_DEPENDS+= automake${AMVER}:${PORTSDIR}/devel/automake${AMVER} -USE_AUTOCONF_VER= 213 -.endif # != current && != devel - -.endif # defined(USE_AUTOMAKE) || defined(USE_AUTOMAKE_VER) +.else +BUILD_DEPENDS+= automake14:${PORTSDIR}/devel/automake14 +AUTOMAKE_ARGS+= -i +USE_AUTOCONF_VER?= 213 +.endif +.endif .if defined(USE_AUTOCONF) || defined(USE_AUTOCONF_VER) -USE_AUTOCONF?= yes +USE_AUTOCONF?= yes USE_AUTOCONF_VER?= 213 -# 1. Unify to model of: -# devel, current, or default (213). - -.if ${USE_AUTOCONF_VER} != devel && ${USE_AUTOCONF_VER} != current -.if ${USE_AUTOCONF_VER} > 253 -USE_AUTOCONF_VER= devel -.elif ${USE_AUTOCONF_VER} == 253 -USE_AUTOCONF_VER= current -.else # USE_AUTOCONV_VER < 253 -USE_AUTOCONF_VER= 213 -.endif # USE_AUTOCONV_VER < 253 -.endif # ${USE_AUTOCONF_VER} != devel && ${USE_AUTOCONF_VER} != current - -# 2. Set paths according to above model. - -.if ${USE_AUTOCONF_VER} == devel -ACVER= 254 -ACJOINPATH= :${AUTOCONF_PATH} -AUTOCONF_DIR?= ${LOCALBASE}/share/autoconf${ACVER} -AUTOCONF_PATH?= ${LOCALBASE}/libexec/autoconf${ACVER} -BUILD_DEPENDS+= autoconf${ACVER}:${PORTSDIR}/devel/autoconf${ACVER} -.elif ${USE_AUTOCONF_VER} == current -ACVER= 253 -ACJOINPATH= -AUTOCONF_DIR?= ${LOCALBASE}/share/autoconf -BUILD_DEPENDS+= autoconf:${PORTSDIR}/devel/autoconf -.else # != current && != devel -ACVER= 213 -ACJOINPATH= :${AUTOCONF_PATH} -AUTOCONF_DIR?= ${LOCALBASE}/share/autoconf${ACVER} -AUTOCONF_PATH?= ${LOCALBASE}/libexec/autoconf${ACVER} -BUILD_DEPENDS+= autoconf${ACVER}:${PORTSDIR}/devel/autoconf${ACVER} -.endif # ${USE_AUTOCONF_VER} != "current" - -.endif # defined(USE_AUTOCONF) || defined(USE_AUTOCONF_VER) - -# automake/autoconf ==> GNU configure is here - -.if defined(USE_AUTOMAKE_VER) || defined(USE_AUTOCONF_VER) GNU_CONFIGURE= yes -.endif # defined(USE_AUTOMAKE_VER) || defined(USE_AUTOCONF_VER) - -# set up overall user path to find tools - -.if defined(AUTOMAKE_PATH) -AUTOTOOLS_PATH=${AUTOMAKE_PATH}${ACJOINPATH} -.elif defined(AUTOCONF_PATH) -AUTOTOOLS_PATH=${AUTOCONF_PATH} -.endif # defined(AUTOCONF_PATH) - -# prefix path and add to all env settings - -.if defined(AUTOTOOLS_PATH) -MAKE_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH} -CONFIGURE_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH} -SCRIPTS_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH} -AUTOCONF_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH} -AUTOMAKE_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH} -AUTOTOOLS_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH} -.endif # defined(AUTOTOOLS_PATH) - -# set up names/paths to programs - -.if defined(AMVER) -.if !defined(AUTOMAKE_PATH) -ACLOCAL?= aclocal -AUTOMAKE?= automake -.else # defined(AUTOMAKE_PATH) -ACLOCAL?= ${AUTOMAKE_PATH}/aclocal -AUTOMAKE?= ${AUTOMAKE_PATH}/automake -.endif # defined(AUTOMAKE_PATH) -.endif # defined(AMVER) - -.if defined(ACVER) -.if !defined(AUTOCONF_PATH) -AUTOCONF?= autoconf -AUTOHEADER?=autoheader -AUTOIFNAMES?=ifnames -AUTORECONF?=autoreconf -AUTOSCAN?= autoscan -AUTOUPDATE?=autoupdate -.else # defined(AUTOCONF_PATH) -AUTOCONF?= ${AUTOCONF_PATH}/autoconf -AUTOHEADER?=${AUTOCONF_PATH}/autoheader -AUTOIFNAMES?=${AUTOCONF_PATH}/ifnames -AUTORECONF?=${AUTOCONF_PATH}/autoreconf -AUTOSCAN?= ${AUTOCONF_PATH}/autoscan -AUTOUPDATE?=${AUTOCONF_PATH}/autoupdate -.endif # defined(AUTOCONF_PATH) -.endif # defined(ACVER) - -# Set all unset vars for the programs to ${FALSE}. This way -# we can catch a certain class of port Makefile errors quickly. -ACLOCAL?= ${FALSE} -AUTOMAKE?= ${FALSE} -AUTOCONF?= ${FALSE} -AUTOHEADER?=${FALSE} -AUTOIFNAMES?=${FALSE} -AUTORECONF?=${FALSE} -AUTOSCAN?= ${FALSE} -AUTOUPDATE?=${FALSE} - -# END AUTOMAKE/AUTOCONF SETUP -###################################################################### - +.endif +.if defined(USE_AUTOCONF_VER) +BUILD_DEPENDS+= autoconf213:${PORTSDIR}/devel/autoconf213 +.endif .if defined(USE_LIBTOOL) GNU_CONFIGURE= yes BUILD_DEPENDS+= libtool:${PORTSDIR}/devel/libtool @@ -1996,10 +1869,6 @@ DOCSDIR?= ${PREFIX}/share/doc/${PORTNAME} EXAMPLESDIR?= ${PREFIX}/share/examples/${PORTNAME} DATADIR?= ${PREFIX}/share/${PORTNAME} -PLIST_SUB+= DOCSDIR="${DOCSDIR:S,^${PREFIX}/,,}" \ - EXAMPLESDIR="${EXAMPLESDIR:S,^${PREFIX}/,,}" \ - DATADIR="${DATADIR:S,^${PREFIX}/,,}" - .MAIN: all ################################################################ |