(0) Fast INDEX generation. Only print out the directory name and

    don't recurse in "make describe".  The new INDEX target in
    ports/Makefile invokes a perl script to recurse and convert them
    into package names.

    While I'm here, change the name of targets and move them around a
    little bit for the sake of consistency.

    It is also probably worth noting here that the meaning of the
    "build dependency" list in INDEX has been changed slightly
    changed.  The old list was "build depends and its build depends"
    -- not particularly useful if you had things like autoconf, which
    run-depend on gm4 (you install all the things listed here and
    you'll get an autoconf that won't run).

    It is now "build depends and its run depends" -- you install
    everything listed here, and you'll be able to build the port.
Submitted by:	steve

(0') Fast README.html generation.  It uses ports/INDEX to find
    dependencies instead of embarking on to a recursive loop.
Submitted by:	steve

(1) Remove NO_WRKDIR and NO_EXTRACT.  Their functionality are easily
    replacable with NO_WRKSUBDIR=t and EXTRACT_ONLY= (nothing on right
    side), and they get in the way of read-only port trees.

(2) Surround first few variable definitions with ".if !defined()".
    This will make cross-compilation easier and also speed up make
    processes.

(3) Call sysctl with absolute path.  Prefer the one in /sbin over the
    one in /usr/sbin.

(4) Add four new variables

    PKGINSTALL?=	${PKGDIR}/INSTALL
    PKGDEINSTALL?=	${PKGDIR}/DEINSTALL
    PKGREQ?=		${PKGDIR}/REQ
    PKGMESSAGE?=	${PKGDIR}/MESSAGE

    and use them in PKG_ARGS.  Frobbing with PKG_ARGS directly is
    strongly discouraged.

(5) Change PKG_SUFX to ".tar" (instead of ".tgz") if PKG_NOCOMPRESS is
    defined.  This is intended only for our own use.

(6) Add more sites to MASTER_SITE_GNU.
Submitted by:	billf

(7) Override MANUAL_PACKAGE_BUILD if PARALLEL_PACKAGE_BUILD is
    defined.  This is intended only for our own use.

(8) Add new target "ignorelist" which will print out the package name
    if the port is not going to be built on this machine.  This is
    intended only for our own use.

(9) Make mtree a little quieter.

1 files changed, 101 insertions, 72 deletions

diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk
index 66dc62198f10..c523b6279104 100644
--- a/Mk/bsd.port.mk
+++ b/Mk/bsd.port.mk
@@ -1,7 +1,7 @@
 #-*- mode: Fundamental; tab-width: 4; -*-
 # ex:ts=4
 #
-#	$Id: bsd.port.mk,v 1.298 1998/11/20 04:00:38 asami Exp $
+#	$Id: bsd.port.mk,v 1.299 1998/11/25 00:12:27 asami Exp $
 #	$NetBSD: $
 #
 #	bsd.port.mk - 940820 Jordan K. Hubbard.
@@ -189,8 +189,6 @@ OpenBSD_MAINTAINER=	imp@OpenBSD.ORG
 #				  unpacks to.  (Default: ${WRKDIR}/${DISTNAME} unless
 #				  NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
 # NO_WRKSUBDIR	- Assume port unpacks directly into ${WRKDIR}.
-# NO_WRKDIR		- There's no work directory at all; port does this someplace
-#				  else.
 # PATCHDIR 		- A directory containing any additional patches you made
 #				  to port this software to FreeBSD (default:
 #				  ${MASTERDIR}/patches)
@@ -285,10 +283,10 @@ OpenBSD_MAINTAINER=	imp@OpenBSD.ORG
 #
 # Set these variables if your port doesn't need some of the steps.
 # Note that there are no NO_PATCH or NO_CONFIGURE variables becuase
-# those steps are empty by default.  Also, NO_CHECKSUM is a user variable
-# and is not to be set in a port's Makefile.  See above for NO_PACKAGE.
+# those steps are empty by default.  NO_EXTRACT is not allowed anymore
+# since we need to at least create ${WRKDIR}.  Also, NO_CHECKSUM is a user
+# variable and is not to be set in a port's Makefile.  See above for NO_PACKAGE.
 #
-# NO_EXTRACT	- Use a dummy (do-nothing) extract target.
 # NO_BUILD		- Use a dummy (do-nothing) build target.
 # NO_INSTALL	- Use a dummy (do-nothing) install target.
 #
@@ -389,19 +387,33 @@ OpenBSD_MAINTAINER=	imp@OpenBSD.ORG
 .if !defined(AFTERPORTMK)
 
 # Get the architecture
+.if !defined(ARCH)
 ARCH!=	/usr/bin/uname -m
+.endif
 
 # Get the operating system type
+.if !defined(OPSYS)
 OPSYS!=	/usr/bin/uname -s
+.endif
 
 # Get the operating system revision
+.if !defined(OSREL)
 OSREL!=	/usr/bin/uname -r | sed -e 's/[-(].*//'
+.endif
 
 # Get __FreeBSD_version
-OSVERSION!=	sysctl -n kern.osreldate
+.if !defined(OSVERSION)
+.if exists(/sbin/sysctl)
+OSVERSION!=	/sbin/sysctl -n kern.osreldate
+.else
+OSVERSION!=	/usr/sbin/sysctl -n kern.osreldate
+.endif
+.endif
 
 # Get the object format.
+.if !defined(PORTOBJFORMAT)
 PORTOBJFORMAT!=	test -x /usr/bin/objformat && /usr/bin/objformat || echo aout
+.endif
 
 MASTERDIR?=	${.CURDIR}
 
@@ -497,11 +509,7 @@ PREFIX?=		${LOCALBASE}
 # Start of post-makefile section.
 .if !defined(BEFOREPORTMK)
 
-.if !defined(NO_WRKDIR)
 WRKDIR?=		${WRKDIRPREFIX}${.CURDIR}/work
-.else
-WRKDIR?=		${WRKDIRPREFIX}${.CURDIR}
-.endif
 .if defined(NO_WRKSUBDIR)
 WRKSRC?=		${WRKDIR}
 .else
@@ -538,6 +546,10 @@ GNU_CONFIGURE=	yes
 BUILD_DEPENDS+=		autoconf:${PORTSDIR}/devel/autoconf
 .endif
 
+#.if defined(REQUIRES_MOTIF)
+#BUILD_DEPENDS+=		${X11BASE}/lib/libXm.a:${PORTSDIR}/tmp/motif
+#.endif
+
 PERL_VERSION=	5.00502
 PERL_VER=		5.005
 PLIST_SUB+=		PERL_VERSION=${PERL_VERSION} \
@@ -687,28 +699,36 @@ COMMENT?=	${PKGDIR}/COMMENT
 DESCR?=		${PKGDIR}/DESCR
 PLIST?=		${PKGDIR}/PLIST
 TMPPLIST?=	${WRKDIR}/.PLIST.mktmp
+PKGINSTALL?=		${PKGDIR}/INSTALL
+PKGDEINSTALL?=		${PKGDIR}/DEINSTALL
+PKGREQ?=			${PKGDIR}/REQ
+PKGMESSAGE?=		${PKGDIR}/MESSAGE
 
 PKG_CMD?=		/usr/sbin/pkg_create
 PKG_DELETE?=	/usr/sbin/pkg_delete
 .if !defined(PKG_ARGS)
 PKG_ARGS=		-v -c ${COMMENT} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`" ${EXTRA_PKG_ARGS}
-.if exists(${PKGDIR}/INSTALL)
-PKG_ARGS+=		-i ${PKGDIR}/INSTALL
+.if exists(${PKGINSTALL})
+PKG_ARGS+=		-i ${PKGINSTALL}
 .endif
-.if exists(${PKGDIR}/DEINSTALL)
-PKG_ARGS+=		-k ${PKGDIR}/DEINSTALL
+.if exists(${PKGDEINSTALL})
+PKG_ARGS+=		-k ${PKGDEINSTALL}
 .endif
-.if exists(${PKGDIR}/REQ)
-PKG_ARGS+=		-r ${PKGDIR}/REQ
+.if exists(${PKGREQ})
+PKG_ARGS+=		-r ${PKGREQ}
 .endif
-.if exists(${PKGDIR}/MESSAGE)
-PKG_ARGS+=		-D ${PKGDIR}/MESSAGE
+.if exists(${PKGMESSAGE})
+PKG_ARGS+=		-D ${PKGMESSAGE}
 .endif
 .if !defined(NO_MTREE)
 PKG_ARGS+=		-m ${MTREE_FILE}
 .endif
 .endif
+.if defined(PKG_NOCOMPRESS)
+PKG_SUFX?=		.tar
+.else
 PKG_SUFX?=		.tgz
+.endif
 # where pkg_add records its dirty deeds.
 PKG_DBDIR?=		/var/db/pkg
 
@@ -764,7 +784,14 @@ MASTER_SITE_XCONTRIB+=	\
 
 MASTER_SITE_GNU+=	\
 	ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ \
-	ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/
+	ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/ \
+	ftp://ftp.kddlabs.co.jp/pub/gnu/%SUBDIR%/ \
+	ftp://ftp.digex.net/pub/gnu/%SUBDIR%/ \
+	ftp://ftp.univ-evry.fr/pub/gnu/%SUBDIR%/ \
+	ftp://ftp.cdrom.com/pub/gnu/%SUBDIR%/ \
+	ftp://ftp.duke.edu/pub/gnu/%SUBDIR%/ \
+	ftp://ftp.gamma.ru/pub/gnu/%SUBDIR%/ \
+	ftp://ftp.nihon-u.ac.jp/pub/gnu/%SUBDIR%/
 
 MASTER_SITE_PERL_CPAN+=	\
 	ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ \
@@ -1046,6 +1073,10 @@ IGNORE=	"does not require Motif"
 IGNORE=	"may not be placed on a CDROM: ${NO_CDROM}"
 .elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
 IGNORE=	"is restricted: ${RESTRICTED}"
+.elif defined(NO_WRKDIR)
+IGNORE=	"defines NO_WRKDIR, which is obsoleted.  If you are defining NO_WRKDIR and NO_EXTRACT, try changing it to NO_WRKSUBDIR=yes and EXTRACT_ONLY= \(the right side intentionally left empty\)"
+.elif defined(NO_EXTRACT)
+IGNORE=	"defines NO_EXTRACT, which is obsoleted.  Try changing it to EXTRACT_ONLY= \(the right side intentionally left empty\)"
 .elif defined(NO_CONFIGURE)
 IGNORE=	"defines NO_CONFIGURE, which is obsoleted"
 .elif defined(NO_PATCH)
@@ -1056,7 +1087,7 @@ IGNORE=	"is broken for ELF: ${BROKEN_ELF}"
 IGNORE=	"is marked as broken: ${BROKEN}"
 .endif
 
-.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING))
+.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING) && !defined(PARALLEL_PACKAGE_BUILD))
 IGNORE=	"has to be built manually: ${MANUAL_PACKAGE_BUILD}"
 clean:
 	@${IGNORECMD}
@@ -1088,7 +1119,12 @@ reinstall:
 	@${IGNORECMD}
 package:
 	@${IGNORECMD}
+ignorelist: package-name
+.else
+ignorelist:
+	@${DO_NADA}
 .endif
+
 .endif
 
 ################################################################
@@ -1145,13 +1181,6 @@ checksum: fetch
 	@${DO_NADA}
 .endif
 
-# Disable extract
-.if defined(NO_EXTRACT) && !target(extract)
-extract: fetch
-	@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} checksum REAL_EXTRACT=yes
-	@${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE}
-.endif
-
 # Disable build
 .if defined(NO_BUILD) && !target(build)
 build: configure
@@ -1247,10 +1276,8 @@ do-fetch:
 
 .if !target(do-extract)
 do-extract:
-.if !defined(NO_WRKDIR)
 	@${RM} -rf ${WRKDIR}
 	@${MKDIR} ${WRKDIR}
-.endif
 	@for file in ${EXTRACT_ONLY}; do \
 		if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
 		then \
@@ -1461,7 +1488,7 @@ _PORT_USE: .USE
 			${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \
 			exit 1; \
 		else \
-			${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/; \
+			${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \
 		fi; \
 	else \
 		${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
@@ -1632,7 +1659,6 @@ clean: pre-clean
 	@${MAKE} clean-depends
 .endif
 	@${ECHO_MSG} "===>  Cleaning for ${PKGNAME}"
-.if !defined(NO_WRKDIR)
 	@if [ -d ${WRKDIR} ]; then \
 		if [ -w ${WRKDIR} ]; then \
 			${RM} -rf ${WRKDIR}; \
@@ -1640,9 +1666,6 @@ clean: pre-clean
 			${ECHO_MSG} "===>   ${WRKDIR} not writable, skipping"; \
 		fi; \
 	fi
-.else
-	@${RM} -f ${WRKDIR}/.*_done ${TMPPLIST}
-.endif
 .endif
 
 .if !target(pre-distclean)
@@ -1775,19 +1798,6 @@ package-name:
 	@${ECHO} ${PKGNAME}
 .endif
 
-# Show (recursively) all the packages this package depends on.
-
-.if !target(package-depends)
-package-depends:
-	@for dir in `${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
-		if [ -d $$dir ]; then \
-			(cd $$dir ; ${MAKE} package-name package-depends); \
-		else \
-			${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
-		fi; \
-	done
-.endif
-
 # Build a package but don't check the package cookie
 
 .if !target(repackage)
@@ -1802,9 +1812,7 @@ pre-repackage:
 
 .if !target(package-noinstall)
 package-noinstall:
-.if !defined(NO_WRKDIR)
 	@${MKDIR} ${WRKDIR}
-.endif
 	@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package
 	@${RM} ${TMPPLIST}
 	-@${RMDIR} ${WRKDIR}
@@ -1961,16 +1969,35 @@ clean-depends:
 .endif
 .endif
 
-.if !target(depends-list)
-depends-list:
+# Dependency lists: build and runtime.  Print out directory names.
+
+build-depends-list:
 	@for dir in `${ECHO} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
 		if [ -d $$dir ]; then \
-			(cd $$dir ; ${MAKE} package-name depends-list); \
+			${ECHO} $$dir; \
+		else \
+			${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
+		fi; \
+	done | sort -u
+
+run-depends-list:
+	@for dir in `${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
+		if [ -d $$dir ]; then \
+			${ECHO} $$dir; \
+		else \
+			${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
+		fi; \
+	done | sort -u
+
+# This one does not print out directory names -- it could take a long time.
+package-depends:
+	@for dir in `${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
+		if [ -d $$dir ]; then \
+			(cd $$dir ; ${MAKE} package-name package-depends); \
 		else \
 			${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
 		fi; \
 	done
-.endif
 
 ################################################################
 # Everything after here are internal targets and really
@@ -2000,12 +2027,12 @@ describe:
 	${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \
 	case "A${FETCH_DEPENDS}B${BUILD_DEPENDS}C${LIB_DEPENDS}D${DEPENDS}E" in \
 		ABCDE) ;; \
-		*) cd ${.CURDIR} && ${ECHO} -n `${MAKE} depends-list|sort -u`;; \
+		*) cd ${.CURDIR} && ${ECHO} -n `${MAKE} build-depends-list|sort -u`;; \
 	esac; \
 	${ECHO} -n "|"; \
 	case "A${RUN_DEPENDS}B${LIB_DEPENDS}C${DEPENDS}D" in \
 		ABCD) ;; \
-		*) cd ${.CURDIR} && ${ECHO} -n `${MAKE} package-depends|sort -u`;; \
+		*) cd ${.CURDIR} && ${ECHO} -n `${MAKE} run-depends-list|sort -u`;; \
 	esac; \
 	${ECHO} ""
 .endif
@@ -2027,25 +2054,27 @@ README.html:
 			-e 's
%%PKG%%
${PKGNAME}
g' \
 			-e '/%%COMMENT%%/r${PKGDIR}/COMMENT' \
 			-e '/%%COMMENT%%/d' \
-			-e 's
%%BUILD_DEPENDS%%
'"`${MAKE} print-depends-list`"'
' \
-			-e 's
%%RUN_DEPENDS%%
'"`${MAKE} print-package-depends`"'
' \
+			-e 's
%%BUILD_DEPENDS%%
'"`${MAKE} pretty-print-build-depends-list`"'
' \
+			-e 's
%%RUN_DEPENDS%%
'"`${MAKE} pretty-print-run-depends-list`"'
' \
 		>> $@
 
-.if !target(print-depends-list)
-print-depends-list:
+# The following two targets require an up-to-date INDEX in ${PORTSDIR}
+
+.if !target(pretty-print-build-depends-list)
+pretty-print-build-depends-list:
 .if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \
 	defined(LIB_DEPENDS) || defined(DEPENDS)
 	@${ECHO} -n 'This port requires package(s) "'
-	@${ECHO} -n `${MAKE} depends-list | sort -u`
+	@${ECHO} -n `grep '^${PKGNAME}|' ${PORTSDIR}/INDEX | awk -F\| '{print $$8;}'`
 	@${ECHO} '" to build.'
 .endif
 .endif
 
-.if !target(print-package-depends)
-print-package-depends:
+.if !target(pretty-print-run-depends-list)
+pretty-print-run-depends-list:
 .if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS)
 	@${ECHO} -n 'This port requires package(s) "'
-	@${ECHO} -n `${MAKE} package-depends | sort -u`
+	@${ECHO} -n `grep '^${PKGNAME}|' ${PORTSDIR}/INDEX | awk -F\| '{print $$9;}'`
 	@${ECHO} '" to run.'
 .endif
 .endif
@@ -2134,17 +2163,17 @@ fake-pkg:
 		${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
 		${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
 		${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
-		if [ -f ${PKGDIR}/INSTALL ]; then \
-			${CP} ${PKGDIR}/INSTALL ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
+		if [ -f ${PKGINSTALL} ]; then \
+			${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
 		fi; \
-		if [ -f ${PKGDIR}/DEINSTALL ]; then \
-			${CP} ${PKGDIR}/DEINSTALL ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
+		if [ -f ${PKGDEINSTALL} ]; then \
+			${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
 		fi; \
-		if [ -f ${PKGDIR}/REQ ]; then \
-			${CP} ${PKGDIR}/REQ ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \
+		if [ -f ${PKGREQ} ]; then \
+			${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \
 		fi; \
-		if [ -f ${PKGDIR}/MESSAGE ]; then \
-			${CP} ${PKGDIR}/MESSAGE ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
+		if [ -f ${PKGMESSAGE} ]; then \
+			${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
 		fi; \
 		for dep in `${MAKE} package-depends ECHO_MSG=/usr/bin/true | sort -u`; do \
 			if [ -d ${PKG_DBDIR}/$$dep ]; then \