blob: 3074117c56099ac300b7c690048c07ae34af6dd9 (
plain) (
tree)
|
|
# New ports collection makefile for: zh-cle_base
# Date created: Nov 17, 1999
# Whom: keith@FreeBSD.org
#
# $FreeBSD$
#
PORTNAME= cle_base
PORTVERSION= 0.9p1
CATEGORIES= chinese emulators linux
MASTER_SITES= \
ftp://cle.linux.org.tw/pub/CLE/stable/v0.9p1/i386/RedHat/RPMS/ \
ftp://freebsd.sinica.edu.tw/pub/keith/zh-rpm/
DISTFILES= ${RPM_SET1} ${RPM_LDCONFIG} ${RPM_BASH2} ${RPM_SET2} \
${RPM_RPM} ${RPM_SET3} ${RPM_L10N}
EXTRACT_ONLY=
MAINTAINER= ports@FreeBSD.org
COMMENT= The base set of CLE packages needed in Linux mode, support both GB & Big5
RUN_DEPENDS= rpm:${PORTSDIR}/archivers/rpm
ONLY_FOR_ARCHS= i386
DIST_SUBDIR= zh-rpm
PREFIX= ${LINUXBASE}
NO_BUILD= yes
NO_FILTER_SHLIBS= yes
NO_MTREE= yes
PKGINSTALL= ${WRKDIR}/pkg-install
.include <bsd.port.pre.mk>
LIBC5_COMPAT= ld.so-1.9.5-13.i386.rpm libc-5.3.12-31.i386.rpm
RPM_BINUTILS= binutils-2.9.5.0.22-6.i386.rpm
RPM_GLIB= glib-1.2.6-3.i386.rpm
RPM_GLIBC= glibc-2.1.3-21.i386.rpm
RPM_LDCONFIG= ldconfig-1.9.5-16.i386.rpm
RPM_RPM= rpm-3.0.5-9.6x.i386.rpm
RPM_X_LIBS= XFree86-libs-3.3.6-24CLE.i386.rpm
#
# The file files/base-list lists all rpms that are installed
# by a minimal RedHat installation versus all rpms installed
# by this port.
#
RPM_SET1= setup-2.1.8-1.noarch.rpm \
filesystem-1.3.5-1.noarch.rpm \
basesystem-6.0-4.noarch.rpm
RPM_SET2= ${RPM_GLIBC} \
termcap-10.2.7-9.noarch.rpm \
libtermcap-2.0.8-20.i386.rpm \
bash-2.04-1.i386.rpm \
ncurses-5.0-11.i386.rpm \
zlib-1.1.3-6.i386.rpm \
info-4.0-5.i386.rpm \
fileutils-4.0-21.i386.rpm \
grep-2.4-3.i386.rpm \
${RPM_BINUTILS} \
gd-1.3-6.i386.rpm \
gdbm-1.8.0-3.i386.rpm \
${RPM_GLIB} \
${LIBC5_COMPAT} \
libstdc++-2.9.0-30.i386.rpm \
sh-utils-2.0-5.i386.rpm \
readline-2.2.1-6.i386.rpm \
cle-release-0.9p1-2.noarch.rpm
RPM_SET3= setserial-2.15-3.i386.rpm \
slang-1.2.2-5.i386.rpm \
stat-1.5-12.i386.rpm \
tcsh-6.09-4.i386.rpm \
xpm-3.4k-2.i386.rpm
RPM_L10N= ${RPM_X_LIBS} \
locale-zh-0.9-3.i386.rpm \
xa+cv-0.7-pre1.i386.rpm
DBPATH= /var/lib/rpm
RPMFLAGS= --ignoreos --root ${LINUXBASE} --dbpath ${DBPATH} \
--nodeps --replacepkgs --notriggers --noscripts
RPMDIR= ${DISTDIR}/${DIST_SUBDIR}
REMOVE_DIRS= /dev /home /root /tmp /var/tmp /usr/local /usr/tmp
REMOVE_FILES= /bin/df /bin/su /etc/exports /etc/group \
/etc/localtime /etc/motd /etc/passwd /etc/printcap \
/etc/services /etc/protocols
.if ${OSVERSION} <= 320001
#
# Hack to let the rpm installer run. The actual kernel change occurred after
# 400008 on 4.0-current and well after 320001, but we'll assume people running
# -current and -stable stay reasonably up-to-date.
#
# Define this if you get messages that look like
#
# --
# ELF interpreter /compat/linux/lib/ld-linux.so.2 not found
# execution of script failed
# --
#
NEEDLOADLINK= true
.endif
do-patch:
@${DO_NADA}
post-patch:
@${SED} -e "s;@LINUXBASE@;${LINUXBASE};g" ${FILESDIR}/INSTALL.in > ${WRKDIR}/pkg-install
pre-install:
# Handle the loading of the linux loadable kernel module if
# required.
@${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
do-install:
@${MKDIR} ${LINUXBASE}/${DBPATH}
@${MKDIR} ${LINUXBASE}/var/tmp
@rpm --initdb --root ${LINUXBASE} --dbpath ${DBPATH}
#
# Make sure we have a /dev/null in the chrooted environment.
#
@${MKDIR} ${LINUXBASE}/dev
@${RM} -f ${LINUXBASE}/dev/null
@mknod ${LINUXBASE}/dev/null c 2 2
@chmod 666 ${LINUXBASE}/dev/null
.if defined(NEEDLOADLINK)
@${MKDIR} ${LINUXBASE}/compat
@${LN} -s / ${LINUXBASE}/compat/linux
.endif
#
# Install all packages. Ignore dependencies just
# like the Red Hat installer.
#
@for R in ${RPM_SET1}; do \
${ECHO} $$R; \
rpm -U ${RPMFLAGS} ${RPMDIR}/$$R; \
done
@${ECHO} ${RPM_LDCONFIG}
@rpm -U ${RPMFLAGS} ${RPMDIR}/${RPM_LDCONFIG}
@brandelf -t Linux ${LINUXBASE}/sbin/ldconfig
@for R in ${RPM_SET2}; do \
${ECHO} $$R; \
rpm -U ${RPMFLAGS} ${RPMDIR}/$$R; \
done
@brandelf -t Linux ${LINUXBASE}/bin/sh
@${ECHO} ${RPM_RPM}
@rpm -U ${RPMFLAGS} ${RPMDIR}/${RPM_RPM}
@brandelf -t Linux ${LINUXBASE}/bin/rpm
@for R in ${RPM_SET3}; do \
${ECHO} $$R; \
rpm -U ${RPMFLAGS} ${RPMDIR}/$$R; \
done
@for R in ${RPM_L10N}; do \
${ECHO} $$R; \
rpm -U ${RPMFLAGS} ${RPMDIR}/$$R; \
done
@ln -sf ${LINUXBASE}/usr/X11R6/lib/libXpm.so.4.11 ${LINUXBASE}/usr/X11R6/lib/libXpm.so.4
@echo "/usr/i486-linux-libc5/lib" > ${LINUXBASE}/etc/ld.so.conf
@echo "/usr/X11R6/lib" >> ${LINUXBASE}/etc/ld.so.conf
@${LINUXBASE}/sbin/ldconfig
#
# Install yp.conf as a hint to NIS users
#
${INSTALL} ${COPY} -m 644 ${FILESDIR}/yp.conf ${LINUXBASE}/etc
#
# Finish
#
.if defined(NEEDLOADLINK)
@${RM} -rf ${LINUXBASE}/compat
.endif
@for D in ${REMOVE_DIRS}; do \
${RM} -rf ${LINUXBASE}/$$D; \
done
@for F in ${REMOVE_FILES}; do \
${RM} ${LINUXBASE}/$$F; \
done
@${LN} -s /var/tmp ${LINUXBASE}/usr/tmp
@${TOUCH} ${LINUXBASE}/CLE-0.9p1
post-install:
@${ECHO} ''
@fmt ${PKGMESSAGE}
@${ECHO} ''
.include <bsd.port.post.mk>
|