path: root/multimedia/mplayer/Makefile

# New ports collection makefile for:	mplayer
# Date created:		10 August 2001
# Whom:			Thomas E. Zander
#			with lots of help from Vladimir Kushnir
# $FreeBSD$
#
# There are many knobs to tune mplayer towards your specific wishes
# and preferences.
# You can activate a knob by typing something like
# "make -DKNOB" or "make KNOB=yes" instead of just "make"
#
# A description of the several possibilities is available here:
#
# Core funcionality:
#
# WITH_OPTIMIZED_CFLAGS
# default: undefined
# define if you want to enable -O3 -ffast-math -fomit-frame-pointer
# on gcc build commands. This will improve speed on most machines.
#
# WITHOUT_RUNTIME_CPUDETECTION
# default: undefined
# by default, mplayer is built with support for changing the used cpu
# instruction set while playing. This is necessary for package building.
# If you want to compile a specific version of mplayer working faster
# but only on your cpu type, then define this knob.
# If you define this, there are several additional knobs to explicitly
# disable some possible CPU features. See below.
#
# WITHOUT_MENCODER
# default: undefined
# the default is to build mplayer with mencoder. If you're sure that you
# don't want to encode or recode any media file, then define this.
#
# WITH_GUI
# default: defined if gtk12 libs are installed on the system
# defining this knob will force the ports system to install gtk12 first
# (if not available) and then link mplayer against it. Then you'll
# be able to use gmplayer, the graphical version of mplayer
#
# WITH_FREETYPE
# default: undefined
# defining this will change mplayer's font display ability from bitmap
# fonts to truetype fonts
#
#
# CPU features:
#
# The following is only of interest if you have enabled
# WITHOUT_RUNTIME_CPUDETECTION
# Further, the correct instruction set of your processor is normally
# auto-detected, so there is probably no necissity to change them.
#
# WITHOUT_MMX
# default: autodetected
# disables using of mmx code
#
# WITHOUT_3DNOW
# default: autodetected
# disables using of 3dNow! instructions on AMD CPUs
#
# WITHOUT_DSP
# default: autodetected
# disables using of AMD Athlon DSP extentions
#
# WITHOUT_SSE
# default: autodetected
# disables all mmx2 and sse/sse2 code
# CAUTION: There are some Athlon CPUs which claim to be sse-able but
# they aren't. If you have strange problems on this subject, try
# to build mplayer with this knob and report the problem
# NOTE: SSE is available only if "options CPU_ENABLE_SSE" in your
# kernel config. This is standard for 5.x systems on I686_CPU and above.
# 4.x users will have to define this explicitly.
#
#
# Feature options:
# These options influence, which libraries mplayer is linked to.
# Note: The libraries are needed to play the particular files under
# particular circumstances.
# ("autodetect" in this sections means: If the ports system finds
# the libary on your system, it is used, otherwise not.
# If you define it, it will be built and installed as dependency.)
#
# WITH_DVD
# default: autodetect
#
# WITH_LIBDVDREAD
# default: disabled
# define this if you prefer the use of libdvdread instead of the
# mplayer-internal dvd reading routine (which is derived from
# libdvdread). This only affect mplayer if WITH_DVD is used.
#
# WITH_LIBDVDNAV
# default: autodetect
#
# WITH_ARTS
# default: autodetect
#
# WITH_LIBDV
# default: autodetect
#
# WITH_MAD
# default: autodetect
#
# WITH_SVGALIB
# default: autodetect
#
# WITH_SDL
# default: autodetect
#
# WITH_ESOUND
# default: autodetect
#
# WITH_VORBIS
# default: autodetect
#
# WITH_XANIM
# default: autodetect
#
# WITH_REALPLAYER
# default: autodetect
#
# WITH_LIVEMEDIA
# default: autotedect
#
# WITH_XVID
# default: autodetect
#
# WITHOUT_WIN32_CODECS
# default: undefined
# By default, mplayer depends on and uses the win32-codecs collection.
# Of course, thanks to Microsoft's very cool hyper-super-multi-platform
# support, this is only available on x86 architecture.
# If you're working on x86 and want to disable using of the windows codecs,
# define this knob.
#
#
# Additional knobs:
#
# NOPORTDOCS
# default: undefined
# This knob prevents the ports system from installing additional
# documentation. If you define this, only the manpage is going
# to be installed.

PORTNAME=	mplayer
PORTVERSION=	0.90.0.104
CATEGORIES=	multimedia audio
MASTER_SITES=	http://www1.mplayerhq.hu/MPlayer/releases/ \
		http://www2.mplayerhq.hu/MPlayer/releases/ \
		http://ftp.lug.udel.edu/MPlayer/releases/ \
		http://www4.mplayerhq.hu/MPlayer/releases/ \
		ftp://ftp1.mplayerhq.hu/MPlayer/releases/ \
		ftp://ftp2.mplayerhq.hu/MPlayer/releases/ \
		ftp://ftp.lug.udel.edu/MPlayer/releases/ \
		http://www.rrr.de/~riggs/mplayer/
DISTNAME=	MPlayer-0.90rc4

MAINTAINER=	riggs@rrr.de

LIB_DEPENDS=	png.5:${PORTSDIR}/graphics/png \
		iconv.3:${PORTSDIR}/converters/libiconv

USE_BZIP2=	yes
USE_GMAKE=	yes
USE_XLIB=	yes
GNU_CONFIGURE=	yes
CONFIGURE_ENV=	PTHREAD_CFLAGS="${PTHREAD_CFLAGS}" \
		PTHREAD_LIBS=${PTHREAD_LIBS} \
		TMPDIR="${WRKSRC}"
CONFIGURE_ARGS=	--with-extralibdir=${LOCALBASE}/lib \
		--with-extraincdir=${LOCALBASE}/include \
		--with-x11libdir=${X11BASE}/lib \
		--with-x11incdir=${X11BASE}/include \
		--enable-png \
		--disable-libfame \
		--disable-tv-v4l

USE_GNOMENG=	yes
WANT_GNOME=	yes
MAN1=		mplayer.1
MANCOMPRESSED=	no
INSTALLS_SHLIB=	yes
LDCONFIG_DIRS=	%%PREFIX%%/lib %%PREFIX%%/lib/mplayer/vidix

CONFFILES=	codecs.conf example.conf input.conf menu.conf
DOCFILES=	bugreports.html cd-dvd.html codecs-in.html \
		codecs.html documentation.html faq.html skin.html \
		encoding.html formats.html sound.html \
		users_against_developers.html \
		video.html

.include <bsd.port.pre.mk>

.if exists(${LOCALBASE}/lib/libartsc.so.0)
WITH_ARTS=	yes
.endif

.if exists(${LOCALBASE}/lib/libdv.so.3)
WITH_LIBDV=	yes
.endif

.if exists(${LOCALBASE}/lib/libdvdcss.so.2)
WITH_DVD=	yes
.endif

.if exists(${LOCALBASE}/lib/libdvdnav.so.1)
WITH_LIBDVDNAV=	yes
.endif

.if exists(${LOCALBASE}/lib/libmad.so.1)
WITH_MAD=	yes
.endif

.if exists(${LOCALBASE}/lib/libvga.so.1)
WITH_SVGALIB=	yes
.endif

.if exists(${LOCALBASE}/lib/libSDL-1.1.so.5)
WITH_SDL=	yes
.endif

.if ${HAVE_GNOME:Mesound}!=""
WITH_ESOUND=	yes
.endif

.if exists(${LOCALBASE}/lib/libvorbis.so.2)
WITH_VORBIS=	yes
.endif

.if exists(${LOCALBASE}/lib/libjpeg.so.9)
LIB_DEPENDS+=	jpeg.9:${PORTSDIR}/graphics/jpeg
.endif

.if exists(${X11BASE}/bin/xanim)
WITH_XANIM=	yes
.endif

.if exists(${LOCALBASE}/lib/RealPlayer8/realplay)
WITH_REALPLAYER=	yes
.endif

.if exists(${LOCALBASE}/live/liveMedia/libliveMedia.a)
WITH_LIVEMEDIA=	yes
.endif

.if exists(${LOCALBASE}/lib/libxvidcore.so)
WITH_XVID=	yes
.endif

.if defined(WITH_OPTIMIZED_CFLAGS)
CFLAGS+=	-O3 -ffast-math -fomit-frame-pointer
.endif

.if ${HAVE_GNOME:Mgtk12}!=""
WITH_GUI=	yes
PLIST_SUB+=	GMPLAYER=""
.else
PLIST_SUB+=	GMPLAYER="@comment "
.endif

.if defined(WITH_GUI)
USE_GNOME+=	gtk12
.if defined(PKGNAMESUFFIX)
PKGNAMESUFFIX:=	${PKGNAMESUFFIX}-gtk
.else
PKGNAMESUFFIX=	-gtk
.endif
CONFIGURE_ARGS+=	--enable-gui
.endif

.if !defined(WITHOUT_MENCODER)
LIB_DEPENDS+=	mp3lame.0:${PORTSDIR}/audio/lame
MLINKS+=	mplayer.1 mencoder.1
PLIST_SUB+=	MENCODER=""
.else
CONFIGURE_ARGS+=	--disable-mencoder
PLIST_SUB+=	MENCODER="@comment "
.endif

.if defined(WITH_ARTS)
LIB_DEPENDS+=	artsc.0:${PORTSDIR}/audio/arts

CONFIGURE_ARGS+=	--enable-arts
.else
CONFIGURE_ARGS+=	--disable-arts
.endif

.if defined(WITH_DVD)
.if !defined(WITH_LIBDVDREAD)
LIB_DEPENDS+=	dvdcss.2:${PORTSDIR}/multimedia/libdvdcss
.else
LIB_DEPENDS+=	dvdread.2:${PORTSDIR}/multimedia/libdvdread
.endif
.if defined(WITH_LIBDVDNAV)
LIB_DEPENDS+=	dvdnav.1:${PORTSDIR}/graphics/libdvdnav

CONFIGURE_ARGS+=	--enable-dvdnav
.else
CONFIGURE_ARGS+=	--disable-dvdnav
.endif

CONFIGURE_ARGS+=	--enable-css \
			--with-csslibdir=${LOCALBASE}/lib
.else
CONFIGURE_ARGS+=	--disable-css
.endif

.if defined(WITH_LIBDV)
LIB_DEPENDS+=	dv.3:${PORTSDIR}/multimedia/libdv

CONFIGURE_ARGS+=	--enable-libdv
.else
CONFIGURE_ARGS+=	--disable-libdv
.endif

.if defined(WITH_MAD)
LIB_DEPENDS+=	mad.1:${PORTSDIR}/audio/mad

CONFIGURE_ARGS+=	--enable-mad \
			--with-madlibdir=${LOCALBASE}/lib
.else
CONFIGURE_ARGS+=	--disable-mad
.endif

.if defined(WITH_SVGALIB)
LIB_DEPENDS+=	vga.1:${PORTSDIR}/graphics/svgalib
.endif

.if defined(WITH_SDL)
LIB_DEPENDS+=	SDL-1.1.5:${PORTSDIR}/devel/sdl12
.endif

.if defined(WITH_ESOUND)
USE_GNOME+=	esound
.if defined(PKGNAMESUFFIX)
PKGNAMESUFFIX:=	${PKGNAMESUFFIX}-esound
.else
PKGNAMESUFFIX=	-esound
.endif
.endif

.if defined(WITH_VORBIS)
LIB_DEPENDS+=	vorbis.2:${PORTSDIR}/audio/libvorbis
.endif

.if defined(WITH_REALPLAYER)
CONFIGURE_ARGS+=	--enable-real \
			--with-reallibdir=${LOCALBASE}/lib/RealPlayer8/Codecs
RUN_DEPENDS+=		realplay:${PORTSDIR}/multimedia/linux-realplayer
BUILD_DEPENDS+=		realplay:${PORTSDIR}/multimedia/linux-realplayer
.endif

.if defined(WITH_LIVEMEDIA)
CONFIGURE_ARGS+=	--enable-live \
			--with-livelibdir=${LOCALBASE}/live
RUN_DEPENDS+=		${LOCALBASE}/live/liveMedia/libliveMedia.a:${PORTSDIR}/net/liveMedia
BUILD_DEPENDS+=		${LOCALBASE}/live/liveMedia/libliveMedia.a:${PORTSDIR}/net/liveMedia
.endif

.if defined(WITH_XVID)
CONFIGURE_ARGS+=	--enable-xvid \
			--with-xvidcore=${LOCALBASE}/lib/libxvidcore.so
LIB_DEPENDS+=		xvidcore.0:${PORTSDIR}/graphics/xvid
.endif

.if defined(WITH_FREETYPE)
CONFIGURE_ARGS+=	--with-extraincdir=${LOCALBASE}/include/freetype2 \
			--enable-freetype
LIB_DEPENDS+=		freetype.9:${PORTSDIR}/print/freetype2
.else
RUN_DEPENDS+=	${LOCALBASE}/share/mplayer/fonts:${PORTSDIR}/multimedia/mplayer-fonts
.endif

.if defined(WITH_XANIM)
BUILD_DEPENDS+=	xanim:${PORTSDIR}/graphics/xanim

CONFIGURE_ARGS+=--enable-xanim --with-xanimlibdir=${X11BASE}/lib/X11/xanim
.else
CONFIGURE_ARGS+=--disable-xanim
.endif

# "enable" build for other archs
.if ${ARCH} == "i386"
.if !defined(WITHOUT_RUNTIME_CPUDETECTION)
CONFIGURE_ARGS+=--enable-runtime-cpudetection
.else #WITHOUT_RUNTIME_CPUDETECTION
.if defined(WITHOUT_MMX)
CONFIGURE_ARGS+=--disable-mmx
.endif
.if defined(WITHOUT_3DNOW) || ${OSVERSION} < 400021
CONFIGURE_ARGS+=--disable-3dnow
.endif
.if defined(WITHOUT_DSP) || defined(WITHOUT_3DNOW) || ${OSVERSION} < 400021
CONFIGURE_ARGS+=--disable-3dnowex
.endif
.if defined(WITHOUT_SSE)
CONFIGURE_ARGS+=--disable-mmx2 --disable-sse
.endif
.endif #WITHOUT_RUNTIME_CPUDETECTION
.if !defined(WITH_SVGALIB)
CONFIGURE_ARGS+=--disable-svga
.endif
.if !defined(WITH_SDL)
CONFIGURE_ARGS+=--disable-sdl
.endif
.if !defined(WITH_VORBIS)
CONFIGURE_ARGS+=--disable-vorbis
.endif
.if !defined(WITHOUT_WIN32_CODECS)
RUN_DEPENDS+=	${CODEC_DETECTION_FILE}:${CODEC_PORT}

CONFIGURE_ARGS+=	--with-win32libdir=${LOCALBASE}/lib/win32

CODEC_PORT=	${PORTSDIR}/multimedia/win32-codecs
CODEC_DETECTION_FILE!=	${MAKE} -f ${CODEC_PORT}/Makefile -V CODEC_DETECTION_FILE
.else
CONFIGURE_ARGS+=	--disable-win32 \
			-disable-qtx-codecs
.endif
.endif # ARCH == i386

pre-everything::
	@${ECHO_MSG} "N - O - T - E"
	@${ECHO_MSG} ""
	@${ECHO_MSG} "Take a careful look into the Makefile in order"
	@${ECHO_MSG} "to learn how to tune mplayer towards you personal preferences!"
	@${ECHO_MSG} "For example,"
	@${ECHO_MSG} "make WITH_GUI=yes"
	@${ECHO_MSG} "builds MPlayer with GUI support."

.if defined(WITH_GUI)
	@${ECHO_MSG} "You can download official skin collections from"
	@${ECHO_MSG} "http://www.mplayerhq.hu/homepage/dload.html"
.endif

pre-configure:
.if defined(WITH_LIBDVDREAD)
	@${RM} -Rf ${WRKSRC}/libmpdvdkit2/
.endif

post-install:
	@${MKDIR} ${DATADIR}
	@${CHMOD} 755 ${DATADIR}
.for conf in ${CONFFILES}
	${INSTALL_DATA} ${WRKSRC}/etc/${conf} ${DATADIR}
.endfor
.if !defined(NOPORTDOCS)
	@${MKDIR} ${DOCSDIR}
	@${CHMOD} 755 ${DOCSDIR}
.for doc in ${DOCFILES}
	@${INSTALL_DATA} ${WRKSRC}/DOCS/${doc} ${DOCSDIR}
.endfor
.endif
.if defined(WITH_GUI)
	@${LN} -sf ${PREFIX}/bin/mplayer ${PREFIX}/bin/gmplayer
.endif
	@${CAT} ${.CURDIR}/pkg-message

install-user:
	@${PERL} ${FILESDIR}/install-user

.include <bsd.port.post.mk>