summaryrefslogtreecommitdiff
path: root/net/kdenetwork2 (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Finish updating to KDE2 snapshot 20000829A. Re-add kdenetwork and kdeutilsWill Andrews2000-08-303-153/+43
| | | | | | | | | | | | | | | | dependencies to kde2, and add koffice to kde2, because it's part of the 2.0 release. Fix my bogon in forgetting to remove obsolete qt22 patches. The current state of the ports as far as building and installing is quite good, but I expect minor problems with PLISTs other than for the ones I've fixed here. I'm going to let bento figure it out. :-) Please, test these ports and report bugs to submit@bugs.kde.org, and send me problems with the ports themselves. I've found that KDE2 seems to have stabilized significantly since the last snapshot. And now, I am removing the last patch remaining in the KDE2 ports, except for the QT 2.2 snapshot.
* Update to 20000829A snapshot. Disable kdenetwork2 for the time being soWill Andrews2000-08-291-0/+1
| | | | | | | | | | | | | | I can address some of its issues (should see it marked un-broken in about 3 hours, if they're trivial enough). It took too long to get this update out the door... :-( This is a rather stable version of KDE2. Release is hoped for sometime next month, so I'm going to try to reroll snapshots this weekend. Also decide policy by removing the interactive requirement in qt22's configure script. I don't know why they bothered adding it there.. Bugged by: *many* bug-reports, requests, etc.
* Fix my not-tested-enough KDE2-related ports. :-(Will Andrews2000-07-301-1/+1
| | | | | | | | | | | | | | | | After short discussion with Imura-san, back out GIF-by-default until I can confirm whether or not there are license issues with Unisys. I will deal with this later. I should note that I'd committed to qt2[12] previously without conferring with him on the GIF issue first. One big ouchie: I didn't even set MASTER_SITE/MASTER_SITE_SUBDIR on qt22 properly.. but oh well. Nobody's perfect. :-) Things should be un-broken now.. please test these ports! I'll be trying to update them to a new snap after a week or so. Pointy hat: will Patches graciously submitted by: nra
* Update to 20000724A (custom-rolled snapshot). Rejoice, because nowWill Andrews2000-07-292-87/+248
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Konqueror can load HTML documents, KOffice works semi-well, and KDE2 in general seems less buggy. Only kdeutils was left out of this mega-update. However, it should return soon. :-) The massive reduction in patches is mostly the result of using perl regex replacement. This reduces the amount of time it will take in the future to upgrade these ports, and load on the repository. QT 2.2.0beta0 (aka qt-copy) is officially enabled for the express purpose of allowing KDE2 to compile. It is available in the qt22 port. Additionally, GIF support is re-enabled in both Qt2 ports, so that people can now read GIF images. GIF support is enabled through an internal GIF reader in Qt, and requires no patented libraries. Special effort was made to ensure that people do not install both qt21 and qt22 ports at the same time. I'd like to take a moment to thank the following people for their help: Alex Zepeda <jazepeda@pacbell.net>, Stephan Kulow <coolo@kde.org>, Harri Porten <porten@kde.org>, Waldo Bastian <waba@kde.org>, Marc G. Fournier <scrappy@hub.org>, Arun Sharma <adsharma@sharmas.dhs.org>, Matthias Hoelzer-Kluepfel <mhk@caldera.de>, and many others. Over 150 hours of hard work, testing, etc. were put into this update. Another couple hundred of hours were spent by CPUs trying to compile this behemoth. :-> Special thanks to: Physics Computer Network @ Purdue staff, especially C. Stephen Gunn <csg@physics.purdue.edu>, for giving me access to an extremely fast machine for doing test builds (it performed 12 full builds of the entire suite in the last 7 days). PR: 18838 Submitted by: Arun Sharma <adsharma@sharmas.dhs.org> Approved by: imura, asami
* Mark these BROKEN, they don't compile/run properly.Satoshi Asami2000-07-191-0/+2
| | | | Submitted by: maintainer
* Rename INSTALLS_SHLIBS to INSTALLS_SHLIB. (There was a typo in theSatoshi Asami2000-06-161-1/+1
| | | | | | | | | previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.) Line up the rhs of variable assignments nicely. Remove a couple of extra whitespaces while I'm here. Suggested by: sobomax
* Fourth round of INSTALLS_SHLIBS conversion.Maxim Sobolev2000-06-162-2/+1
|
* Woop doop de doop, I've managed to circumvent the kdesupport2 buildWill Andrews2000-05-175-720/+491
| | | | | | | | | | problems by disabling ODBC library building. Apparently kdenetwork2 doesn't need that support (it does need mimelib), so we're all right on that! This is the import of KDESUPPORT and KDENETWORK 1.90 (aka KDE2 beta). Repo-copies by: asami
* Update with the new PORTNAME/PORTVERSION variablesChris Piazza2000-04-091-2/+2
|
* Doing KDE style mtree in kdelibs.R. Imura2000-03-251-1/+0
| | | | OK'd by: will
* Bump shlib versions of kdelibs11 and kdesupport11.Satoshi Asami2000-02-241-5/+5
|
* Remove giflib dependence.R. Imura2000-02-151-2/+1
| | | | | | | | Only changed giflib -> libungif in kdegraphics. They realy do NOT want libgif, and do NOT use libgif anywhere. Some ports are checking its existence in configure, but they are nonsense at all!!
* Update to KDE-1.1.2Stefan Eßer1999-09-183-7/+140
|
* The version number of libgif.so has changed to 5.Steve Price1999-09-181-1/+1
|
* $Id$ -> $FreeBSD$Peter Wemm1999-08-301-1/+1
|
* You need egcs to build ksirc. Take it out for 3-stable PLIST for now.Satoshi Asami1999-07-211-2/+9
|
* Forget about ${PREFIX}/include/giflib.Thomas Gellekum1999-05-271-3/+2
|
* Add png dependency. That fixes the PLIST problem, so add back deletedSatoshi Asami1999-05-202-1/+78
| | | | | | entries. Submitted by: maintainer
* Remove missing files. I'm not sure if this is the right fix butSatoshi Asami1999-05-101-76/+0
| | | | it will at least get the build going again.
* Upgrade KDE to Release 1.1.1.Stefan Eßer1999-05-033-5/+100
|
* Portlint.Satoshi Asami1999-02-281-3/+2
|
* MASTER_SITE_SUBDIR was broken. My choices in fixing were either go withDavid E. O'Brien1999-02-282-3/+5
| | | | GZIP or BZIP2 distfiles. I went with BZIP2.
* remove hack uu.h -> uudeview.h, I alredy fix uulibAndrey A. Chernov1999-02-111-4/+1
|
* Remove extra argument to "configure" that had been committed by accident.Stefan Eßer1999-02-081-3/+1
|
* Upgrade to KDE 1.1 RELEASE.Stefan Eßer1999-02-083-11/+26
|
* Upgrade to KDE-1.1pre2 ...Stefan Eßer1999-02-063-17/+51
|
* Adjust port Makefiles to new EXTRACT_* variable defaults. See log ofSatoshi Asami1999-02-031-6/+3
| | | | | | | | | | | | | | | | | | | bsd.port.mk rev. 1.304 for details on the change. The fix here is one of the following. (1) Define USE_BZIP2 instead of BUILD_DEPENDS on bzip2 and redefining EXTRACT_* commands. (2) Change ${EXTRACT_CMD} to ${TAR} when the command is obviously calling the "tar" command (i.e., arguments like "-xzf" are spelled out). (3) If ${EXTRACT_CMD} is called directly with ${EXTRACT_BEFORE_ARGS}, add ${EXTRACT_AFTER_ARGS} to the command line as well. (4) If any of EXTRACT_CMD, EXTRACT_BEFORE_ARGS or EXTRACT_AFTER_ARGS is set, define the other two too.
* Make dependency lines point to right directories -- they were stillSatoshi Asami1999-01-081-6/+6
| | | | using the old names (without "11").
* Upgrade to the first pre-release of KDE 1.1.Stefan Eßer1999-01-073-13/+242
| | | | | | | | | | | This port requireat least s version 1.41 of the Qt library. There will be an error reported by configure, if only an earlier version is found, but no automatic port dependency exists (i.e. the x11-toolkits/qt141 port has to be manually built and installed). There may still be a problem with a missing -lXext in the kdesupport port. This will be taken care of during the next few days, if the problem still exists ...
* Mark these broken while Stefan works on an upgrade.Satoshi Asami1999-01-061-1/+3
|
* ElfifyBrian Somers1998-10-011-11/+9
|
* Mark all KDE ports BROKEN for ELF.Justin M. Seger1998-09-301-1/+3
|
* giflib is now converted to ELF so remove regexp support.Steve Price1998-09-191-2/+2
|
* jpeg is now converted to ELF so change LIB_DEPENDS lines accordingly.Satoshi Asami1998-09-151-2/+2
| | | | | (Note, since the shlib major didn't change this just removes the regexp support.)
* Replace qt dependencies with USE_QT.Satoshi Asami1998-08-121-5/+4
| | | | | (Also, net/licq/Makefile: No need to define both HAS_CONFIGURE and GNU_CONFIGURE)
* Fix up dependencies for ports that moved into the x11-toolkits category.Satoshi Asami1998-08-071-3/+3
|
* Change dependencies to accept Qt-1.33 if present,Stefan Eßer1998-07-231-3/+3
| | | | but to build Qt-1.40 if no compiled Qt library can be found.
* Upgrade to KDE Release 1.0Stefan Eßer1998-07-193-33/+66
|
* Mark as broken, will be upgraded to 1.0 within a few days.Stefan Eßer1998-07-131-1/+3
|
* Upgrade to Beta 4.1Stefan Eßer1998-05-213-36/+190
|
* Change JPEG shared library number to 9. This is to make sure that everyoneJustin M. Seger1998-05-041-2/+2
| | | | | | | | | installs the version of the port that uses shared library number 9 and the LIBRARY_VERSION set to the default. Normally this is against our policy (bumping the version number for minor things), however due to the major problems caused with the upgrade, Satoshi and I decided that this was best. Approved by: asami
* Mark these ports broken, they are left behind in the beta-4.1 upgradeSatoshi Asami1998-04-291-1/+3
| | | | and no longer build.
* Switch remaining ports to use jpeg lib version 8.0.Justin M. Seger1998-04-151-2/+2
|
* portlint: ln -> ${LN}Andreas Klemm1998-04-111-2/+2
| | | | | Force symlink: ${LN} -s -> ${LN} -sf, in case of error a 2nd try of make install doesn't fail with an error link exists ...
* Use $(MASTER_SITE_KDE)Stefan Eßer1998-03-061-4/+3
|
* Add category news because of krn.Stefan Eßer1998-03-041-2/+2
|
* Upgrade to Beta3Stefan Eßer1998-02-233-63/+126
|
* Remove the two kdesupport dependencies, I assume Stefan will fixSatoshi Asami1998-02-181-3/+1
| | | | those later when he upgrades it but it's pointing to nowhere now.
* Mark kdenetwork broken instead of taking it out of the parent Makefile.Satoshi Asami1998-02-161-1/+2
|
* (1) Move the following ports out of x11/:Satoshi Asami1997-11-051-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | kdegames -> games/ kdenetwork -> net/ kdesupport -> converters/ kdeutils -> misc/ (Repository copy already done, dependency path and category name fixups is being done in this commit.) (2) Add a virtual category "kde" and add all six (incl. x11/kde{base,lib}) ports. (3) Make package names follow the convention. (4) Change "BUILD_DEPENDS=${X11R6}/bin/moc:..." to "...=moc:...". There is no need to specify the full pathname if the target is an executable in the standard path. (Actually, as the same port is specified in LIB_DEPENDS, I think we can completely do away with this line but since Stefan added this explicitly, I assume there is a reason for it and left it alone.) Approved by: se (all but 4)
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-11 19:12:18 +0000