diff options
Diffstat (limited to 'sysutils/grub2-pcbsd/files/10_ktrueos.in')
| -rw-r--r-- | sysutils/grub2-pcbsd/files/10_ktrueos.in | 389 |
1 files changed, 0 insertions, 389 deletions
diff --git a/sysutils/grub2-pcbsd/files/10_ktrueos.in b/sysutils/grub2-pcbsd/files/10_ktrueos.in deleted file mode 100644 index 15410ac18d8a..000000000000 --- a/sysutils/grub2-pcbsd/files/10_ktrueos.in +++ /dev/null @@ -1,389 +0,0 @@ -#!/bin/sh -# -# Copyright 2015 iXsystems (Kris Moore) -# All rights reserved -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted providing that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING -# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. - -# Script to detect TrueOS / PC-BSD disk installations and create grub -# entries for them - -# Check if we have beadm installed, if not skip this file -if [ ! -e "/usr/local/sbin/beadm" ] ; then exit 0; fi - -ROOTFS=`mount | awk '/ \/ / {print $1}'` -BEDS="$( echo ${ROOTFS} | awk -F '/' '{print $2}' )" -if [ "$BEDS" = "dev" ] ; then BEDS="ROOT"; fi - -serial=0; -console=0; -for x in ${GRUB_TERMINAL_OUTPUT}; do - if [ xserial = "x$x" ]; then - serial=1; - fi - if [ xgfxterm = "x$x" ]; then - console=1; - fi - if [ xconsole = "x$x" ]; then - console=1; - fi -done - -if [ "x$serial" = "x1" ]; then - if [ "x$console" = "x1" ]; then - out="-Dh" - else - out="-h" - fi -fi - -display_loaderopts() -{ - # Optional ARG1, set to a ZFS dataset to mount and read values from - if [ -n "$1" ] ; then - fMnt="/mnt.$$" - mkdir $fMnt - mount -t zfs ${1} $fMnt >/dev/null - if [ $? -ne 0 ] ; then - echo "Failed to mount ${1}" >&2 - return - fi - else - fMnt="" - fi - - # Create our placeholder to save _load entries to parse - touch /tmp/.lRObjs.$$ - touch /tmp/.lSysCtls.$$ - - # Loader files, in order of which to read them - lFiles="${fMnt}/boot/loader.conf.local ${fMnt}/boot/loader.conf ${fMnt}/boot/loader.conf.trueos ${fMnt}/boot/loader.conf.pcbsd" - for f in $lFiles - do - if [ ! -e "$f" ] ; then continue ; fi - - # Lets parse any of the _load= lines - grep "_load=" ${f} | grep -v "^#" >/tmp/.lObjs.$$ - while read line - do - loadVal="`echo $line | cut -d '=' -f 1`" - # Is this value already set in a higher priority file? - grep -q "^${loadVal}" /tmp/.lRObjs.$$ - if [ $? -eq 0 ];then continue; fi - - # Save this value for later - echo "$line" >> /tmp/.lRObjs.$$ - haveObjs=1 - - done < /tmp/.lObjs.$$ - rm /tmp/.lObjs.$$ - - # Lets look for any sysctls to set - grep "." ${f} | grep "=" | grep -v "^#" | grep -v "_load" >/tmp/.sObjs.$$ - while read line - do - loadVal="`echo $line | cut -d '=' -f 1`" - # Is this value already set in a higher priority file? - grep -q "^${loadVal}" /tmp/.lSysCtls.$$ - if [ $? -eq 0 ];then continue; fi - - # Save this value for later - echo "$line" >> /tmp/.lSysCtls.$$ - haveSysCtls=1 - - done < /tmp/.sObjs.$$ - rm /tmp/.sObjs.$$ - done - - # Using GELI encryption? - haveGELI="false" - - # Now lets echo out the modules to load - if [ "$haveObjs" = "1" ] ; then - while read line - do - echo "$line" | grep -q '"YES"' - if [ $? -ne 0 ] ; then continue ; fi - module="`echo $line | cut -d '=' -f 1 | sed 's|_load||g'`" - # Try to locate module now - if [ -e "${fMnt}/boot/kernel/${module}.ko" ] ; then - mPath="kernel" - elif [ -e "${fMnt}/boot/modules/${module}.ko" ] ; then - mPath="modules" - else - # This isn't a module that we can see, lets set it as a variable - #echo "No such module $line, setting as a variable" >&2 - echo "$line" >> /tmp/.lSysCtls.$$ - continue - fi - - # Are we loading GELI module? - if [ "$module" = "geom_eli" ] ; then haveGELI="true" ; fi - - echo " kfreebsd_module_elf ${loadPrefix}/@/boot/${mPath}/${module}.ko" - done < /tmp/.lRObjs.$$ - fi - - # Add our compat kenv lines - echo " set kFreeBSD.bootfile=\"kernel\"" - echo " set kFreeBSD.kernel=\"kernel\"" - echo " set kFreeBSD.kernel_options=\"\"" - echo " set kFreeBSD.kernelname=\"/boot/kernel/kernel\"" - echo " set kFreeBSD.module_path=\"/boot/kernel;/boot/modules\"" - - # Any kenv to set? - if [ "$haveSysCtls" = "1" ] ; then - while read line - do - # Strip out the vfs.root.mountfrom, we set that elsewhere - echo "$line" | grep -q "vfs.root.mountfrom" - if [ $? -eq 0 ] ; then continue ; fi - - line="`echo $line | sed 's|"||g'`" - key="`echo $line | cut -d '=' -f 1`" - val="`echo $line | cut -d '=' -f 2`" - if [ -z "$key" -o -z "$val" ] ; then continue ; fi - echo " set kFreeBSD.${key}=\"${val}\"" - done < /tmp/.lSysCtls.$$ - fi - - rm /tmp/.lRObjs.$$ - rm /tmp/.lSysCtls.$$ - if [ -n "$1" ] ; then - umount /mnt.$$ >/dev/null - rmdir /mnt.$$ >/dev/null - fi - - # Set the grub.platform kenv variable - echo " set kFreeBSD.grub.platform=\"\$grub_platform\"" - - # See if we need to do GELI passphrase passthrough - if [ "$haveGELI" = "true" ] ; then - echo " set kFreeBSD.kern.geom.eli.passphrase=\"\$pass\"" - fi -} - -detect_beadm() -{ - /usr/bin/which -s beadm >/dev/null 2>/dev/null - if [ $? -ne 0 ] ; then return 0; fi - - # Check if we are running from the installer and use its beadm - if [ -e "/root/beadm.install" ] ; then - BEADM="/root/beadm.install" - - # Check if this is valid - testBE=`$BEADM list` - if [ -z "$testBE" ] ; then - # No BE's, lets switch back to regular mode - BEADM="`/usr/bin/which beadm`" - fi - else - BEADM="`/usr/bin/which beadm`" - fi - - ${BEADM} list >/dev/null 2>/dev/null - if [ $? -ne 0 ] ; then return 0; fi - - - if [ -e "/etc/defaults/pcbsd" ] ; then - NICK="PC-BSD" - else - NICK="TrueOS" - fi - - # Only list the default BE here - $BEADM list -H >/tmp/.grub-beadm.$$ 2>/dev/null - while read line - do - be=`echo $line | awk '{print $1}'` - flags=`echo $line | awk '{print $2}'` - - # Is this BE marked as wanting to be used for next boot? Make it the first one if so - if [ "$flags" = "NR" -o "$flags" = "R" ] ; then - BE_LIST="$be" - break - fi - done < /tmp/.grub-beadm.$$ - rm /tmp/.grub-beadm.$$ - - # Get list of beadm datasets - for b in $BE_LIST - do - # Got a beadm snapshot, lets get the complete dataset name - beLine=`${BEADM} list -a | grep "/$BEDS/${b}[[:space:]]"` - cdataset=`echo $beLine | awk '{print $1}'` - cdatadate=`echo $beLine | awk '{print $5}'` - cdatatime=`echo $beLine | awk '{print $6}'` - ztank=`echo $cdataset | cut -d '/' -f 1` - shortdataset="/`echo $cdataset | cut -d '/' -f 2-5`" - # Get the BE nickname if it exists - beNickName=`${BEADM} list | grep "^${b} " | tr -s ' ' | cut -d ' ' -f 7-12` - if [ -z "$beNickName" ] ; then - beNickName="$b" - fi - - # First part of this dataset - cat > /tmp/.grubdataset.$$.1 << EOF - insmod zfs - search --no-floppy -s -l $ztank -EOF - - # Second part of loader to save - cat > /tmp/.grubdataset.$$.2 << EOF - kfreebsd_module ${shortdataset}/@/boot/zfs/zpool.cache type=/boot/zfs/zpool.cache - set kFreeBSD.vfs.root.mountfrom=zfs:$cdataset -EOF - - # Now lets look for options in loader.conf to load - loadPrefix="${shortdataset}" - # If this is the current mounted dataset, we can skip mounting it - mount | grep -q -e "$cdataset on / (" -e "$cdataset on /mnt (" - if [ $? -eq 0 ] ; then - display_loaderopts >>/tmp/.grubdataset.$$.2 - else - display_loaderopts $cdataset >> /tmp/.grubdataset.$$.2 - fi - - # Lets start a submenu for each BE -cat << EOF - -submenu "${NICK} (${beNickName}) - ${cdatadate} ${cdatatime}" { -EOF - - # Lets do the default entry first - ################################# - cat << EOF - menuentry "Normal Bootup" { -EOF - # Get the dataset guts - cat /tmp/.grubdataset.$$.1 - echo " kfreebsd ${shortdataset}/@/boot/kernel/kernel ${out}" - echo " kfreebsd_loadenv ${shortdataset}@/boot/device.hints" - cat /tmp/.grubdataset.$$.2 - - # Set any options - cat << EOF - } -EOF - - # Next lets do single user mode - ################################# - cat << EOF - menuentry "Single User Mode" { -EOF - # Get the dataset guts - cat /tmp/.grubdataset.$$.1 - echo " kfreebsd ${shortdataset}/@/boot/kernel/kernel ${out} -s" - echo " kfreebsd_loadenv ${shortdataset}@/boot/device.hints" - cat /tmp/.grubdataset.$$.2 - - # Set any options - cat << EOF - } -EOF - - # Next lets do verbose mode - ################################# - cat << EOF - menuentry "Verbose Mode" { -EOF - # Get the dataset guts - cat /tmp/.grubdataset.$$.1 - echo " kfreebsd ${shortdataset}/@/boot/kernel/kernel ${out} -v" - echo " kfreebsd_loadenv ${shortdataset}@/boot/device.hints" - cat /tmp/.grubdataset.$$.2 - - # Set any options - cat << EOF - } -EOF - - if [ -e "/etc/defaults/pcbsd" ] ; then - # Next lets do display wizard - ################################# - cat << EOF - menuentry "Run the Display Wizard" { -EOF - # Get the dataset guts - cat /tmp/.grubdataset.$$.1 - echo " kfreebsd ${shortdataset}/@/boot/kernel/kernel ${out}" - echo " kfreebsd_loadenv ${shortdataset}@/boot/device.hints" - cat /tmp/.grubdataset.$$.2 - - # Set any options - cat << EOF - set kFreeBSD.runwiz=YES - } -EOF - # Now for vesa mode - ################################# - cat << EOF - menuentry "Run X in vesa mode" { -EOF - # Get the dataset guts - cat /tmp/.grubdataset.$$.1 - echo " kfreebsd ${shortdataset}/@/boot/kernel/kernel ${out}" - echo " kfreebsd_loadenv ${shortdataset}@/boot/device.hints" - cat /tmp/.grubdataset.$$.2 - - # Set any options - cat << EOF - set kFreeBSD.xvesa=YES - } -EOF - # Now for non-xorg mode - ################################# - cat << EOF - menuentry "Boot to console (Disable X)" { -EOF - # Get the dataset guts - cat /tmp/.grubdataset.$$.1 - echo " kfreebsd ${shortdataset}/@/boot/kernel/kernel ${out}" - echo " kfreebsd_loadenv ${shortdataset}@/boot/device.hints" - cat /tmp/.grubdataset.$$.2 - - # Set any options - cat << EOF - set kFreeBSD.noxorg=YES - } -EOF - fi - - - # Lastly lets close the submenu section - cat << EOF -} - -EOF - done - - # Cleanup after ourselves - if [ -e "/tmp/.grubdataset.$$.1" ] ; then - rm /tmp/.grubdataset.$$.1 - rm /tmp/.grubdataset.$$.2 - fi -} - -# Detect our types of disk layouts -detect_beadm - |