1 files changed, 0 insertions, 198 deletions
diff --git a/net/samba36/files/samba.in b/net/samba36/files/samba.in
deleted file mode 100644
index 98c2ca75a3d7..000000000000
--- a/net/samba36/files/samba.in
+++ /dev/null
@@ -1,198 +0,0 @@
-#!/bin/sh
-#
-# $FreeBSD$
-#
-
-# PROVIDE: nmbd smbd
-%%WINBIND%%# PROVIDE: winbindd
-# REQUIRE: NETWORKING SERVERS DAEMON ldconfig resolv
-%%CUPS%%# REQUIRE: cupsd
-# BEFORE: LOGIN
-# KEYWORD: shutdown
-#
-# Add the following lines to /etc/rc.conf.local or /etc/rc.conf
-# to enable this service:
-#
-#samba_enable="YES"
-# You can disable/enable any of the Samba daemons by specifying:
-#nmbd_enable="NO"
-#smbd_enable="NO"
-%%WINBIND%%# You need to enable winbindd separately, by adding:
-%%WINBIND%%#winbindd_enable="YES"
-#
-# Configuration file can be set with:
-#samba_config="%%SAMBA_CONFDIR%%/%%SAMBA_CONFIG%%"
-#
-
-. /etc/rc.subr
-
-name="samba"
-rcvar=samba_enable
-# Custom commands
-extra_commands="reload status"
-start_precmd="samba_start_precmd"
-start_cmd="samba_cmd"
-stop_cmd="samba_cmd"
-status_cmd="samba_cmd"
-restart_precmd="samba_checkconfig"
-reload_precmd="samba_checkconfig"
-reload_cmd="samba_reload_cmd"
-rcvar_cmd="samba_rcvar_cmd"
-# Defaults
-samba_config_default="%%SAMBA_CONFDIR%%/%%SAMBA_CONFIG%%"
-testparm_command="%%PREFIX%%/bin/testparm"
-smbcontrol_command="%%PREFIX%%/bin/smbcontrol"
-samba_parm="${testparm_command} -s -v --parameter-name"
-pid_extra=
-#
-samba_daemons="nmbd smbd"
-%%WINBIND%%samba_daemons="${samba_daemons} winbindd"
-
-samba_checkconfig() {
-    echo -n "Performing sanity check on Samba configuration: "
-    if ${testparm_command} -s ${samba_config:+"${samba_config}"} >/dev/null 2>&1; then #"
-	echo "OK"
-    else
-	echo "FAILED"
-	return 1
-    fi
-    return 0
-}
-
-samba_start_precmd() {
-    # Make sure rundir exists
-    if [ ! -d "%%SAMBA_RUNDIR%%" -a ! -e "%%SAMBA_RUNDIR%%" ]; then
-	install -m 0755 -d "%%SAMBA_RUNDIR%%"
-    fi
-    # XXX: Never delete winbindd_idmap, winbindd_cache and group_mapping
-    if [ -n "${samba_lockdir}" -a -d "${samba_lockdir}" ]; then
-	echo -n "Removing stale Samba tdb files: "
-	for file in brlock.tdb browse.dat connections.tdb gencache.tdb \
-		    locking.tdb messages.tdb namelist.debug sessionid.tdb \
-		    unexpected.tdb
-	do
-	    rm "${samba_lockdir}/${file}" </dev/null 2>/dev/null && echo -n '.'
-	done
-	echo " done"
-    fi
-}
-
-samba_rcvar_cmd() {
-    local name rcvar
-    rcvar=${name}_enable
-    # Prevent recursive calling
-    unset "${rc_arg}_cmd" "${rc_arg}_precmd" "${rc_arg}_postcmd"
-    # Check master variable
-    run_rc_command "${_rc_prefix}${rc_arg}" ${rc_extra_args}
-    # Check dependent variables
-    for name in ${samba_daemons}; do
-	# XXX
-	rcvars=''; v=''
-	rcvar=${name}_enable
-	run_rc_command "${_rc_prefix}${rc_arg}" ${rc_extra_args}
-    done
-}
-
-samba_reload_cmd() {
-    local name rcvar command pidfile force_run
-    # Prevent recursive calling
-    unset "${rc_arg}_cmd" "${rc_arg}_precmd" "${rc_arg}_postcmd"
-    # Ignore rcvar and run command
-    if [ -n "${_rc_prefix}" -a "${_rc_prefix}" = "one" ] || [ -n "${rc_force}" ] || [ -n "${rc_fast}" ]; then
-	force_run=yes
-    fi
-    # Apply to all daemons
-    for name in ${samba_daemons}; do
-	rcvar=${name}_enable
-	command="%%PREFIX%%/sbin/${name}"
-	pidfile="%%SAMBA_RUNDIR%%/${name}${pid_extra}.pid"
-	# Daemon should be enabled and running
-	if ( [ -n "${rcvar}" ] && checkyesno "${rcvar}" ) || [ -n "$force_run" ]; then
-	    if [ -n "$(check_pidfile "${pidfile}" "${command}")" ]; then
-		debug "reloading ${name} configuration"
-		echo "Reloading ${name}."
-		# XXX: Hack with pid_extra
-		${smbcontrol_command} "${name}${pid_extra}" 'reload-config' ${command_args} >/dev/null 2>&1
-	    fi
-	fi
-    done
-}
-
-samba_cmd() {
-    local name rcvar rcvars v command pidfile samba_daemons result force_run
-    # Prevent recursive calling
-    unset "${rc_arg}_cmd" "${rc_arg}_precmd" "${rc_arg}_postcmd"
-    # Stop processes in the reverse order
-    if [ "${rc_arg}" = "stop" ] ; then
-	samba_daemons=$(reverse_list ${samba_daemons})
-    fi
-    # Ignore rcvar and run command
-    if [ -n "${_rc_prefix}" -a "${_rc_prefix}" = "one" ] || [ -n "${rc_force}" ] || [ -n "${rc_fast}" ]; then
-	force_run=yes
-    fi
-    # Assume success
-    result=0
-    # Apply to all daemons
-    for name in ${samba_daemons}; do
-	# XXX
-	rcvars=''; v=''
-	rcvar=${name}_enable
-	command="%%PREFIX%%/sbin/${name}"
-	pidfile="%%SAMBA_RUNDIR%%/${name}${pid_extra}.pid"
-	# Daemon should be enabled and running
-	if ( [ -n "${rcvar}" ] && checkyesno "${rcvar}" ) || [ -n "$force_run" ]; then
-	    run_rc_command "${_rc_prefix}${rc_arg}" ${rc_extra_args}
-	    # If any of the commands failed, take it as a global result
-	    result=$((${result} || $?))
-	fi
-    done
-    return ${result}
-}
-
-samba_config_init() {
-    local name
-    # Load configuration
-    load_rc_config "${name}"
-    for name in ${samba_daemons}; do
-	load_rc_config "${name}"
-    done
-    # Location of the config
-    samba_config=${samba_config="${samba_config_default}"} #"
-    # XXX: Hack to work around name change of pid file with non-default config
-    if [ -n "${samba_config}" -a "${samba_config}" != "${samba_config_default}" ]; then
-	pid_extra="-$(basename "${samba_config}")"
-    fi
-    # Defaults
-    samba_enable=${samba_enable:=NO}
-    # Setup dependent variables
-    if [ -n "${rcvar}" ] && checkyesno "${rcvar}"; then
-	nmbd_enable=${nmbd_enable=YES}
-	smbd_enable=${smbd_enable=YES}
-    fi
-    nmbd_enable=${nmbd_enable:=NO}
-    smbd_enable=${smbd_enable:=NO}
-%%WINBIND%%    # Winbindd
-%%WINBIND%%    if [ -z "${winbind_enable}" ]; then
-%%WINBIND%%	samba_idmap=$(${samba_parm} 'idmap uid' "${samba_config}" 2>/dev/null)
-%%WINBIND%%	# Check that winbindd is actually configured
-%%WINBIND%%	if [ -n "${samba_idmap}" ]; then
-%%WINBIND%%		winbindd_enable="YES"
-%%WINBIND%%	fi
-%%WINBIND%%	winbindd_enable=${winbindd_enable:=NO}
-%%WINBIND%%    fi
-}
-
-# Load configuration variables
-samba_config_init
-# Where is the lockdir
-samba_lockdir=$(${samba_parm} 'lock directory' "${samba_config}" 2>/dev/null)
-# Common flags
-command_args=${samba_config:+-s "${samba_config}"} #"
-nmbd_flags=${nmbd_flags="-D"}
-smbd_flags=${smbd_flags="-D"}
-%%WINBIND%%winbindd_flags=${winbindd_flags=''}
-# Requirements
-required_files="${samba_config}"
-required_dirs="${samba_lockdir}"
-
-run_rc_command "$1"